OLI-NATURA mini hand pads in white or beigeFor polishing in and out the oil application on smaller areasContent 1 piece Size 10 x 15 cm Selectable between white and beige (different hardness/coarseness) The OLI-NATURA mini hand pads in white and beige measure 10 x 15 cm and are ideal for polishing in and out the oil application on smaller areas. Due to the soft degree of hardness, the surface is compacted particularly gently. Mini hand pads are ideal for furniture or small areas and corners that can be difficult to reach with a polishing machine. With a matching OLI-NATURA MINI hand pad holder the work can be made even easier.Mini hand pads, whiteSoft, absorbent and non-abrasiveFor polishing in oil-treated surfaces (softwood) Mini hand pads, beigeSoft, absorbent and non-abrasiveFor polishing in oil-treated surfaces (hardwood)

OLI-NATURA Scandic Oil - FurnitureParquet oil in raw wood effectOLI-NATURA Scandic Oil - Classic is inspired by Scandinavian style and combines a natural look with surface protection. It makes light wood look as if untreated and freshly sanded. The natural colour of the wood is almost unfired (highlighted). Only during processing does a colour deepening appear in the wet phase. This, however, disappears in the course of drying.This oil gets its raw wood effect from a VOC-free compound of vegetable oils, which we emulsify in water. Added to this is a fine pinch of light-stable white pigments, which round off the raw wood effect and provide UV protection. Due to its low viscosity, Scandic-Oil Classic is recommended for roller application on light wood floors such as oak, fir, spruce or ash. The dried coating is harmless to humans, animals and plants, complies with DIN EN 71-3 ( Safety of toys) as well as DIN 53160 ( Saliva and perspiration resistant) and is a building product approved by the German Institute for Building Technology (DIBt). Thanks to the intelligent formulation, the oil-soaked rags, pads or brushes do not tend to self-ignite . The applicationPreparation:Sand the wood surface carefully. Start with coarse sanding. Final sanding for furniture surfaces with P240 grit. Wood moisture content: 8-12%. The surface must be dry, thoroughly cleaned and free of oil, wax, grease, silicone and sanding dust. Apply material at room temperature. Application: For the first oil application, apply oil evenly and generously with a short-pile microfibre roller. Work quickly because of the rapid drying and avoid rolling into oil that has already dried. Allow the surface to dry for at least 2-3 hours. Then sand the dried oil application intermediately with grit P220-P280. A P220 sanding sponge is best for this - Dust the surface well. Apply the second oil coat evenly with a microfibre roller and allow to dry. During application, a colour deepening occurs in the wet phase, which disappears after complete drying. The surface is dry and brittle? The water resistance is weakening? - Now it's time for maintenance! The following applies to everyday cleaning: Regular dusting forms the basis. Regular damp care with wood soap ensures quick cleanliness and regreasing. Never use all-purpose or conventional household cleaners, as these can leach out the wood and attack the protection. The wood can always be refreshed with OLI-Natura Wood Refresher. It renews the protective effect and provides a water-repellent surface without changing the colour tone of the wood. Worn areas on floors or stairs that have been treated with OLI-NATURA Scandic-Oil can be partially sanded and re-oiled without having to re-treat the entire surface.Consumption: With 2 applications and depending on the absorbency of the substrate, approx. 60-80g per m² this corresponds to 12-15 m² per litre. Drying: Depending on humidity and temperature, the surface is: dust-dry after 1 hour, carefully walkable after 2 hours. Protect from water during the first 3-5 days until complete curing.

Oil absorbent cloths - highly absorbent and lint-free for perfect wood surfacesOur oil absorbent cloths are made of high-quality viscose synthetic fiber and are the ideal choice for absorbing excess oil and for final polishing of oiled wood surfaces. They are particularly tear-resistant, lint-free and solvent-resistant. Advantages at a glance:Perfect for polishing freshly oiled wood surfaces Highly absorbent and tear-resistant, even when wet Lint-free for a clean finish Viscose synthetic fiber with cotton-like properties Silicone-free and solvent-resistant Also ideal for cleaning in workshops and households Product details:Material: Viscose synthetic fiber (cotton-like) Size: approx. 38 x 34 cm Packaging units: 10 or 40 pieces Tip: After use, the cloths should be dried in a well-ventilated place or stored under water, as they can self-ignite due to heat accumulation. Discover the right oil absorbent cloths for your wood care at Leiste24 now for clean, professional results every time.

OLI-NATURA Scandic Oil - ClassicParquet oil in raw wood effectOLI-NATURA Scandic Oil - Classic is inspired by Scandinavian style and combines a natural look with surface protection. It makes light wood look as if untreated and freshly sanded. The natural colour of the wood is almost unfired (highlighted). Only during processing does a colour deepening appear in the wet phase. This, however, disappears in the course of drying.This oil gets its raw wood effect from a VOC-free compound of vegetable oils, which we emulsify in water. Added to this is a fine pinch of light-stable white pigments, which round off the raw wood effect and provide UV protection. Due to its low viscosity, Scandic-Oil Classic is recommended for roller application on light wood floors such as oak, fir, spruce or ash. The dried coating is harmless to humans, animals and plants, complies with DIN EN 71-3 ( Safety of toys) as well as DIN 53160 ( Saliva and perspiration resistant) and is a building product approved by the German Institute for Building Technology (DIBt). Thanks to the intelligent formulation, the oil-soaked rags, pads or brushes do not tend to self-ignite . The applicationPreparation:Sand the wood surface carefully. Start with coarse sanding. Final sanding for furniture surfaces with P240 grit. Wood moisture content: 8-12%. The surface must be dry, thoroughly cleaned and free of oil, wax, grease, silicone and sanding dust. Apply material at room temperature. Application: For the first oil application, apply oil evenly and generously with a short-pile microfibre roller. Work quickly because of the rapid drying and avoid rolling into oil that has already dried. Allow the surface to dry for at least 2-3 hours. Then sand the dried oil application intermediately with grit P220-P280. A P220 sanding sponge is best for this - Dust the surface well. Apply the second oil coat evenly with a microfibre roller and allow to dry. During application, a colour deepening occurs in the wet phase, which disappears after complete drying. The surface is dry and brittle? The water resistance is weakening? - Now it's time for maintenance! The following applies to everyday cleaning: Regular dusting forms the basis. Regular damp care with wood soap ensures quick cleanliness and regreasing. Never use all-purpose or conventional household cleaners, as these can leach out the wood and attack the protection. The wood can always be refreshed with OLI-Natura Wood Refresher. It renews the protective effect and provides a water-repellent surface without changing the colour tone of the wood. Worn areas on floors or stairs that have been treated with OLI-NATURA Scandic-Oil can be partially sanded and re-oiled without having to re-treat the entire surface.Consumption: With 2 applications and depending on the absorbency of the substrate, approx. 60-80g per m² this corresponds to 12-15 m² per litre. Drying: Depending on humidity and temperature, the surface is: dust-dry after 1 hour, carefully walkable after 2 hours. Protect from water during the first 3-5 days until complete curing.

OLI-NATURA pad set, smallA 21-piece set for the perfect oil application.The set includes: 1x pad holder mini with handle.10x mini hand pads in beige - for applying and massaging in.10x mini hand pads in white - for polishing out

OLI-NATURA mini handpad holderFor easier and energy-saving padding Handpad holder with ergonomic gripSize 8 x 13 cmSuitable for the OLI-NATURA mini handpads 10 x 15 cmHook on the underside to fix the padFor even pressure distribution

2in1 sanding sponge red P2202in1 sanding sponge100 Grit = Medium = P220Aluminum oxide coatingDimensions 98 x 66 x 25 mmMedium density foam coreThis red 2-in-1 sanding sponge, grit P220, is sandpaper and sanding block in one piece, which is particularly recommended for manual intermediate sanding of Scandic-oiled surfaces. Thanks to the foam core, the sponge lies well in the hand and adapts to the surface to be worked on. A small amount of grain breaking out is normal and the workpiece should be dusted off after intermediate sanding. After rinsing with water, this hand sanding sponge can be reused.

OLI-NATURA super hand pads in white, beige or greenFor polishing out and massaging in care oils, oils and oil-wax combinationsContent 1 pieces Size 25cm Choose between white, beige and green (different hardness/coarseness and properties)Hand pads are basically suitable for smaller areas or for working in edge areas and corners that may be difficult to reach with a polishing machine. The colors of the pads stand for a certain degree of hardness/roughness or for certain properties. Approximately 1 - 2 m² can be processed with one pad side. The range of the individual pads depends very much on the conditions on the construction site and any cleaning and care additives used. With a suitable hand pad holder, the work can be made even easier. Super hand pad, white Properties: Soft, absorbent and non-abrasive. Application: For polishing in oil-treated surfaces (softwood) li>Super hand pad, beige Properties: Medium soft, absorbent and non-abrasive. Application: For polishing in oil-treated surfaces (hardwood) li>Super hand pad, green Properties: Hard, slightly abrasive. Application: For cleaning light to medium soiling ul>

OLI-NATURA Paint rollerProfessional paint roller with grooves for the application of all paint systems with optimum paint absorption & releaseFor solvent- & water-based clear- & & colored paint systemsFor application & finishingEven & streak-free paint distributionPerfect coating pattern as sprayedAvailable in 10 cm widthThe structured foam roller with special grooves ensures a streak-free, uniform paint distribution. The excellent paint pick-up & delivery allows a surface finish like with a spray gun.The paint roller is the tool for all paint systems. Application & finishing in one!The innovative surface structure of the roller leads to a perfect coating pattern. Due to a double-sided spray groove succeeds a batch-free and excellent material distribution.The paint roller is recommended for water-based paints as well as for solvent-based paints.The paint roller / roller has a diameter of 35 mm and is 10 cm long.

OLI-Aqua Hardener 13.5This hardener component can optionally be added immediately before processing the following water-based varnishes: OLI-Aqua Nordic 18.40, OLI-Aqua Modu (18.30, 18.32 and 18.35). After adding the hardener, the cross-linking reaction between the basecoat and the hardener starts immediately. During the reaction, the viscosity of the lacquers changes.Application / processing instructions. Optimum processing conditions at 20°C and 50% relative humidity. Do not process below +15 °C Stir the hardener thoroughly into the basecoat in the specified mixing ratio shortly before use. Let the mixture stand for 10 minutes before processing. Close the container well and use up as soon as possible. Mixed material residues must not be allowed to cure in closed containers. When using a cup gun, dilute with max. 5% water. The end of the pot life is not indicated by a change in viscosity. Do not pour back excess material. Mixing ratios:OLI-AQUA NORDIC 18.40 I 1K/2K alcohol topcoat 21:1 (5%) - Max. 3 hours drip time OLI-AQUA MODU 18.32 I 1pack/2pack stair varnish 10:1 (10%) - Max. 4 hours dripping time. OLI-AQUA MODU 18.35 I 1C/2C stain varnish 10:1 (10%) - Max. 4 hours

Super Pads for Random Orbital Sanders in WhiteFor applying, working in, & polishing oils & waxes on natural wood surfacesThe Super Pads 152 mm in white, beige, and green consist of a blend of polyester and/or nylon fibers, which are coated with a tough, highly elastic acrylic/latex binder and have been impregnated and coated with abrasive particles (aluminum oxide) impregnated and coated. The Super Pads are suitable for sanding discs with a diameter of 125 mm & 150 mm. The pads can be used on both sides with equal effectiveness! This means frequent replacement is not necessary.The colors of the pads indicate a specific hardness/coarseness and associated properties. Dimensions: Ø 152 mmContents: 5 pieces, packed by type in a cardboard box Colors - PropertiesSuperpad, White (Polishing & Massaging Pad) Properties: Soft, extra thick, and non-abrasive (free of abrasives) For polishing care oils For polishing out & removing excess oil after the application time For oiling & waxing natural softwood surfacesSuperpad, beige (massaging pad - hardwood) Properties: Medium-soft, extra thick, and non-abrasive For oiling & waxing natural hardwood surfaces Even distribution and deep massage of the oil and waxSuperpad, green (cleaning pad) Properties: Hard, slightly abrasive For cleaning light to moderate soiling Raised wood fibers are cut down, smoothing the surface

OLI-NATURA microfibre rollerPROFI roller for hard wax oilsContent 1 piece Size 25cm Oil resistant and lint free For an even and clean application Flor length 5mm

Super pads for random orbital sanders in beigeFor spreading, massaging in & polishing out oils & waxes on natural wood surfacesThe super pads 152 mm in white, beige and green consist of a mixture of polyester and/or nylon fibers, which have been provided with a tough, very elastic acrylic/latex binder and impregnated and coated with abrasive particles (aluminium oxide). The super pads are suitable for sanding discs with a diameter of 125 mm & 150 mm. The pads can be used on both sides with equal effectiveness! This means there is no need to change them frequently.The colors of the pads represent a certain hardness/coarseness and the associated properties. Dimensions: Ø 152 mmContents: 5 pieces, individually packaged in a box Colors - PropertiesSuperpad, white (polishing & massaging pad) Properties: Soft, particularly thick and non-abrasive (abrasive-free) For polishing maintenance oils For polishing & removing oil residues after exposure time For oiling & waxing natural wood surfaces made of softwoodSuperpad, beige (massaging pad - hardwood) Properties: Medium soft, extra thick and non-abrasive For oiling & waxing natural hardwood surfaces Even distribution and deep massaging of the oil and waxSuperpad, green (cleaning pad) Properties: Hard, slightly abrasive For cleaning light to medium soiling Placed wood fibers are cut and the surface is smoothed

OLI-NATURA Scandic Oil - for FurnitureParquet oil in raw wood effectOLI-NATURA Scandic Oil - Classic is inspired by Scandinavian style and combines a natural look with surface protection. It makes light wood look as if untreated and freshly sanded. The natural colour of the wood is almost unfired (highlighted). Only during processing does a colour deepening appear in the wet phase. This, however, disappears in the course of drying.This oil gets its raw wood effect from a VOC-free compound of vegetable oils, which we emulsify in water. Added to this is a fine pinch of light-stable white pigments, which round off the raw wood effect and provide UV protection. Due to its low viscosity, Scandic-Oil Classic is recommended for roller application on light wood floors such as oak, fir, spruce or ash. The dried coating is harmless to humans, animals and plants, complies with DIN EN 71-3 ( Safety of toys) as well as DIN 53160 ( Saliva and perspiration resistant) and is a building product approved by the German Institute for Building Technology (DIBt). Thanks to the intelligent formulation, the oil-soaked rags, pads or brushes do not tend to self-ignite . The applicationPreparation:Sand the wood surface carefully. Start with coarse sanding. Final sanding for furniture surfaces with P240 grit. Wood moisture content: 8-12%. The surface must be dry, thoroughly cleaned and free of oil, wax, grease, silicone and sanding dust. Apply material at room temperature. Application: For the first oil application, apply oil evenly and generously with a short-pile microfibre roller. Work quickly because of the rapid drying and avoid rolling into oil that has already dried. Allow the surface to dry for at least 2-3 hours. Then sand the dried oil application intermediately with grit P220-P280. A P220 sanding sponge is best for this - Dust the surface well. Apply the second oil coat evenly with a microfibre roller and allow to dry. During application, a colour deepening occurs in the wet phase, which disappears after complete drying. The surface is dry and brittle? The water resistance is weakening? - Now it's time for maintenance! The following applies to everyday cleaning: Regular dusting forms the basis. Regular damp care with wood soap ensures quick cleanliness and regreasing. Never use all-purpose or conventional household cleaners, as these can leach out the wood and attack the protection. The wood can always be refreshed with OLI-Natura Wood Refresher. It renews the protective effect and provides a water-repellent surface without changing the colour tone of the wood. Worn areas on floors or stairs that have been treated with OLI-NATURA Scandic-Oil can be partially sanded and re-oiled without having to re-treat the entire surface.Consumption: With 2 applications and depending on the absorbency of the substrate, approx. 60-80g per m² this corresponds to 12-15 m² per litre. Drying: Depending on humidity and temperature, the surface is: dust-dry after 1 hour, carefully walkable after 2 hours. Protect from water during the first 3-5 days until complete curing.

OLI-NATURA oil rollerHigh quality roller for applying oil Content 1 piece Size 25cm Oil resistant and lint free Ideal absorbency For an even and clean application Flor length 5mm

OLI-NATURA microfibre rollerPROFI roller for hard wax oilsContent 1 piece Size 10cm Oil resistant and lint free For an even and clean application Flor length 5mm

Sweden red grinding pad 13 inches / Ø 330 mm - grain size 150The Swedish red standard pad with a diameter of 330 mm is specially designed for disc sanders and is ideal for intermediate sanding, cleaning sanding or preparing for a new seal. It offers a particularly fine sanding pattern with a grit size of 150 and impresses with its consistent removal rate. Advantages at a glance:Suitable for initial, intermediate and cleaning sanding Gentle sanding pattern leaves hardly any sanding marks Universally applicable with 13-inch disc machines 8 mm thick robust and durable High-quality craftsmanship Application:The pad is versatile for sanding old sealants, intermediate sanding when re-sealing or for cleaning oiled wood floors. Unlike sanding grids, it works particularly gently and controlled, leaving virtually no scratch marks. One side of the pad is sufficient for approx. 10-15 m² (depending on the surface and pressure) ideal for professional results with minimal effort. Product details:Diameter: 330 mm (13 inches) Thickness: approx. 8 mm Grit: approx. 150 Color: Swedish red Contents: 1 piece Tip: Also ideal for use on parquet, floorboards, or wooden stairsperfectly prepared for subsequent oiling or varnishing.

OLI-NATURA surface brush 100mmContent 1 pieceIdeal for oiling large areas or for wood stainsVulcanized, best light bristle mixture, natural wood back and wooden handle, lacquered brass sheet, solvent-resistantDimensions 3 x 10 cm

OLI-NATURA paint and oil brush 40mmProfessional paint brush for professional coatings and top results Content 1 piece Size 40mm light bristle mixture 90% tops, raw, polished wooden handle, nickel ferrule Solvent-resistant Also ideal for wood oils

Care set no. 4 with linseed oil varnishPractical complete set for the initial treatment and care of your wooden chopping boards and kitchen utensilsContents of care set no. 1: 250ml OLI-NATURA linseed oil varnish: Provides deep protection and refreshment 2in1 sanding sponge P220: Enables precise fine sanding for optimum surface preparation Two white pads: Ideal for evenly massaging in the oil Oil absorbent cloth: Removes excess oil and ensures a perfect finish Disposable gloves: Keep your hands clean during care Care flyer: With care tips and a QR code to the application videoThe Care Set No. 4 offers pretty much everything wood cutting board lovers* need, from high-quality OLI-NATURA linseed oil varnish to practical pads. It is ideal for deeply effective protection and care of kitchen boards, snack and chopping boards, kitchen covers and other wooden utensils. Whether as a gift or for yourself - our care set no. 4 is the ideal choice. Application:Basic treatment The cutting board must be clean and dry before you start oiling. If the raw wood surface appears somewhat rough, sand it with the fine sanding sponge P220, applying light pressure along the grain. Then remove the sanding dust. Shake the container and apply a little linseed oil varnish to the surface. You can apply the oil with a brush or the white pad in circular movements. If the wood absorbs more quickly in places and appears dry, simply apply a little more oil. Let the oil soak in for around 15-20 minutes, depending on the size of the surface. Then remove the excess oil with the oil absorbent cloth or kitchen paper until there is no more excess oil and the wood feels dry to the touch. Leave the freshly oiled chopping board to dry overnight. Repeat the process 1-2 times as required to achieve good saturation of the wood.Maintenance treatment The cutting board must be clean and dry before you refresh it Shake the container well before use. Pour some OLI-NATURA Linseed Oil Varnish onto the white pad or a cloth (old, discarded cotton T-shirts are ideal cloths for this purpose) and massage the oil into the wood using circular movements. Let the oil soak in briefly, depending on the size of the surface. Then remove the excess oil with the oil absorbent cloth or kitchen paper until there is no more excess oil and the wood feels dry to the touch. Let the freshly oiled chopping board harden in the air for around 1-2 days before using it again.

OLI-NATURA microfibre rollerContent 1 piece Size 25cm Oil resistant and lint free For an even and clean application Flor length 11mm

Brackets for paint and oil rollersRobust clip on plastic and stainless steel Pro quality Suitable for all paint and oil rollers Size 25cm

Super pads for random orbital sanders in greenFor spreading, massaging in & polishing out oils & waxes on natural wood surfacesThe super pads 152 mm in white, beige and green consist of a mixture of polyester and/or nylon fibers, which have been provided with a tough, very elastic acrylic/latex binder and impregnated and coated with abrasive particles (aluminium oxide). The super pads are suitable for sanding discs with a diameter of 125 mm & 150 mm. The pads can be used on both sides with equal effectiveness! This means there is no need to change them frequently.The colors of the pads represent a certain hardness/coarseness and the associated properties. Dimensions: Ø 152 mmContents: 5 pieces, individually packaged in a box Colors - PropertiesSuperpad, white (polishing & massaging pad) Properties: Soft, particularly thick and non-abrasive (abrasive-free) For polishing maintenance oils For polishing & removing oil residues after exposure time For oiling & waxing natural wood surfaces made of softwoodSuperpad, beige (massaging pad - hardwood) Properties: Medium soft, extra thick and non-abrasive For oiling & waxing natural hardwood surfaces Even distribution and deep massaging of the oil and waxSuperpad, green (cleaning pad) Properties: Hard, slightly abrasive For cleaning light to medium soiling Placed wood fibers are cut and the surface is smoothed

OLI-Natura HS Hardener - B-ComponentThis hardener component can optionally be added immediately before processing the following oils from OLI-Natura: HS Hard Wax Oils, HS Professional Oils, Worktop-Oil and Colour-Oil.. In addition to the pure oxidative drying, the OLI-NATURA HS Hardener also initiates a cross-linking reaction of the oil molecules. This results in the formation of particularly close-meshed oil structures that are firmly anchored in the wood and highly resistant. Surfaces treated in this way can be loaded earlier with only one application, have a greater final hardness and a higher abrasion resistance. The addition depends on the oil in question.Application / processing instructions. Optimum processing conditions at 20°C and 50% relative humidity. Do not process below +15 °C Mix hardener thoroughly in the specified mixing ratio just before use. Process the mixture immediately. The dripping time is 2-3 hours for colourless oils (natural) and 1-2 hours for coloured oils. Do not pour back excess material. Danger of spontaneous combustion! Clean soaked rags/pads immediately after use or store under water. Oxidative drying. Provide open windows during and after processing to achieve air circulation. Mixing ratios:HS Hard Wax Oil - 1 part hardener to 10 parts oil (1:10). HS-Profiöl - 1 part hardener to 10 parts oil (1:10) Worktop-Oil - 1 part hardener to 5 parts oil (1:5) Colour-Oil - 1 part hardener to 5 parts oil (1:5)

Brackets for paint and oil rollersRobust clip on plastic and stainless steel Pro quality Suitable for all paint and oil rollers Size 10cm

Care Set No. 3 with RefresherPractical complete setContents of Care Set No. 2: 250 ml OLI-NATURA Wood Soap250 ml OLI NATURA Refresher1 care flyer with step-by-step instructions and tips1 polishing pad1 oil absorbent clothThe practical care set is suitablefor perfect maintenance. set is perfect for the cleaning and care of Scandic-Oil oiled and white & natural oiled wooden surfaces. With the concentrated "OLI-NATURA Wood Soap", dirt can be gently removed without damaging the wood. Intensive color refreshment and care of the wood in depth can be achieved with the "OLI-NATURA wood care oil". The special POLISHING PAD is used to massage in the care oil and the OIL WIPER is used to remove standing oil and for final polishing. The ONE-TIME GLOVES keep your hands clean. We have also included extensive instructions with lots of tips.Particularly resource-conscious people will be pleased to know that the care oil should only ever be applied sparingly. The 250 ml tin can be used to care for and maintain a whole lot of beautiful natural oiled furniture.Application: For refreshing and maintaining Scandic-Oil oiled and white & natural oiled wooden surfaces.

OLI-NATURA Rubber Squeegee / Rubber Spatula - 140mmRubber Squeegee / Rubber Spatula / Surface Spatula with Rubber LipFor an efficient spatula on large furniture surfaces such as tabletops, we offer our rubber lip made of silicone with handy plastic handle. The rubber squeegee is a preferred working tool to avoid applying too much protruding oil, which would have to be removed again afterwards.Particularly our high-solids OLI-NATURA Worktop-Oil and OLI-NATURA Colour Oils are predestined for spatula application. If the oil is then polished with an eccentric sander and pad underneath, it saves a lot of manual work and allows you to good progress.Rubber squeegee with plastic handleEven distribution of oilselastic rubberhandy plastic handleColor: yellow/grayDimensions: 140mm.

Care set no. 1 with natural care oilPractical complete setContents of care set no. 1: 250 ml OLI-NATURA wood soap250 ml OLI-NATURA wood care oil1 care flyer with step-by-step instructions and tips1 polishing pad1 oil absorbent cloth1 disposable gloves (PLA- biodegradable)The practical care set is perfect for the cleaning and care of naturally oiled wooden furniture. With the concentrated "OLI-NATURA Wood Soap", dirt can be gently removed without damaging the wood. Intensive color refreshment and care of the wood in depth can be achieved with the "OLI-NATURA wood care oil". The special POLISHING PAD is used to massage in the care oil and the OIL WIPER is used to remove standing oil and for final polishing. The ONE-TIME GLOVES keep your hands clean. We have also included extensive instructions with lots of tips.Particularly resource-conscious people will be pleased to know that the care oil should only ever be applied sparingly. The 250 ml tin can be used to care for and maintain a whole lot of beautiful natural oiled furniture.Application: For refreshing natural oiled wooden surfaces. If in doubt, apply a sample to a concealed area.Important: Rags/pads soaked with oil can self-ignite due to heat build-up. Therefore, clean them immediately after use or store them under water.

OLI-NATURA hand pad holder large For easier and energy-saving padding Hand pad holder with ergonomic grip Suitable for the OLI-NATURA Super handpads 25cm Hook on the underside to fix the pad For even pressure distribution

OLI-NATURA surface brush oil brush 210mmContent 1 piece Excellent for oiling patio decks. Also suitable for all hard wax oils and for oiling parquet. Vulcanised, best light China bristles, raw wooden body with metal handle holder. Vulcanized and solvent resistant Width 21cm

Care set no. 2 with wood care waxPractical complete setContents of care set no. 2: 250 ml OLI-NATURA wood soap250 ml OLI-NATURA wood care wax1 care flyer with step-by-step instructions and tips1 polishing pad1 oil absorbent cloth1 disposable gloves (PLA- biodegradable)The practical care set is perfect for the cleaning and care of oiled/waxed wooden furniture indoors. With the concentrated "OLI-NATURA Wood Soap", dirt can be gently removed without damaging the wood. Intensive color refreshment and care of the wood in depth can be achieved with the "OLI-NATURA wood care oil". The special POLISHING PAD is used to massage in the care oil and the OIL WIPER is used to remove standing oil and for final polishing. The ONE-TIME GLOVES keep your hands clean. We have also included extensive instructions with lots of tips.Particularly resource-conscious people will be pleased to know that the care oil should only ever be applied sparingly. The 250 ml tin can be used to care for and maintain a whole lot of beautiful natural oiled furniture.Application: For refreshing oiled and hard wax oil-treated wooden surfaces. If in doubt, apply a sample to a concealed area.Important: Rags/pads soaked with oil can self-ignite due to heat build-up. Therefore, clean them immediately after use or store them under water.

OLI-NATURA MAINTENANCE SET No. 1Care set for lacquered surfacesWell cared for simply lasts longer: That is exactly why we present the MAINTENANCE SET #x2116; 1 for the cleaning and care of lacquered wood surfaces. This set includes optimally coordinated products, so you save time and effort in searching and combining individual items. WOOD SOAP: 250 ml wood soapWOOD BALM: 250 ml wood care balmCOTTON-CLOTH: 45x45 cm jersey cotton clothMAINTENANCE-FLYER: Includes care tips and QR code to application videoApplicationApplication "WOOD SOAP":First remove loose dirt by dusting. Shake the bottle well before use.As needed, add about 5-10 ml (2-4 tsp) of wood soap to 1 liter of lukewarm water and mix well. Wipe the surface with a wrung-out cloth until damp.Finish by wiping with a dry cloth.Application "WOOD BALM":First remove loose dirt by dusting. For stubborn dirt, damp clean and then allow the surface to dry thoroughly.Shake the bottle well before use.Follow with a small amount in a lint-free cloth (such as cotton) and apply evenly in the direction of the grain of the surface. Allow the balm to soak in and wipe down if necessary. Do not leave puddles.After 1-2 hours, the surface is usable with care. Full usability is achieved after about 12 hours.Notes & Tips:To clean the painted furniture, it is best to use a lint-free, soft cotton cloth. Old, discarded cotton t-shirts also work well. Please refrain from using microfiber cloths or rough sponges, as they can cause scratches on the surface.Please do not use aggressive, strongly alkaline or solvent-based cleaning or scouring agents, as such products can damage the lacquer surface.Avoid standing moisture, e.g. from wet glasses, leaking flower pots or vases. Spills should be wiped away immediately.Avoid standing moisture, e.g. from wet glasses, leaking flower pots or vases. Spills should be wiped away immediately.Do not place hot pots or the like on lacquered furniture as they may cause stains..