Filter products
Stair nosing 40 x 25 mm in silver - reliable edge protection.Prinz stair nosing profiles reliably protect the edges of the floor covering on the step edge. The grooved surface increases safety on the step edge.Stair nosing profile WxH 40 x 25 mm.Material: Aluminium, EN AW 6063.Machining: Sunk drilled.Mounting type: Screw fixing.Application:The stair nosing profile is used at the ends of stairs, on steps or landings. It is suitable for resilient floor coverings, textile floor coverings, laminate/multilayer, etc. ...Mounting: Screw fixing - suitable screws and dowels are included in the scope of delivery.
Prinz transition profile 90 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, easy disassembly and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIncludes base profile, grey. The aluminium clip profile system is designed for covering thicknesses of 7 to 15 mm. With the raise profile "Beige" even covering thicknesses up to 17.5 mm can be achieved. Concealed fastened, these profiles offer a perfect look without screw holes.Technical data at a glance:Transition profile - black anodised L= 90 cmMaterial: aluminiumFor floor covering thicknesses 7 - 15 mm (up to 17.5 mm with raising profile)Height compensation up to 6 mm Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile fits tightly on both sides.At the same time, the curved toothing allows problem-free dismantling.The top profile can be detached if necessary and then anchored back into the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.
Content: 0.9 M (€19.89 / 1 M)
Aluminium. For covering thicknesses 7-15 mm. Flat design without grooves. Height compensation up to 6 mm. Including base section, grey.
Content: 0.9 M (€20.56 / 1 M)
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 2.7 M (€15.74 / 1 M)
Aluminum profiles with sub-profile for screwing in a very durable professional quality to compensate height differences of 13 mm to 0 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 0.9 M (€17.22 / 1 M)
Prinz transition profile 270 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, problem-free disassembly and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIncludes base profile, grey. The aluminium clip profile system is designed for covering thicknesses of 7 to 15 mm. With the raise profile "Beige" even covering thicknesses up to 17.5 mm can be achieved. Concealed fastened, these profiles offer a perfect look without screw holes.Technical data at a glance:Transition profile - black anodised L= 270 cmMaterial: aluminiumFor floor covering thicknesses 7 - 15 mm (up to 17.5 mm with raising profile)Height compensation up to 6 mm .Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile fits tightly on both sides.At the same time, the curved toothing allows problem-free dismantling.The top profile can be detached if necessary and then anchored back into the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.
Content: 2.7 M (€20.93 / 1 M)
Aluminium. For covering thicknesses 7-15 mm. Flat design without grooves. Height compensation up to 6 mm. Including base section, grey.
Content: 2.7 M (€20.93 / 1 M)
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 0.9 M (€17.22 / 1 M)
Prinz Transition Profile 38 mm - No. 132 - Bronze - 300 cmAluminium transition profile - self-adhesiveTransition ProfileThe transition profile creates a clean and visually appealing transition between two adjoining floor coverings. It protects the covering edges from damage and creates a durable, professional finish in residential and commercial areas.Profile SystemUniversal profiles are the flexible solution for numerous applications around floor coverings. Depending on the design, they are suitable for transitions, finishes or edge protection and provide a clean, professional appearance. High-quality materials and durable workmanship ensure reliable use in residential and commercial areas.Material & QualityThe aluminium profile impresses with its low weight, high stability and excellent corrosion resistance. It is durable, easy to care for and ideally suited for floor finishes in residential and commercial areas.Quality by Prinz ProfilePrinz Profile has stood for quality, precision and innovative interior fitting solutions for decades. High-quality materials, careful workmanship and well-designed profile systems ensure durable and reliable floor finishes. Whether for renovation or new construction, Prinz offers the right solution for almost every installation situation in residential and commercial areas.
Content: 3 M (€6.57 / 1 M)
PROFI-TEC Master transition profile no. 300, 34 mmThe Profi-Tec clip profile system is designed for flooring thicknesses from 6 to 15 mm. Concealed fastening gives Profi-Tec profiles a perfect appearance without screw holes. Fitting is particularly quick and easy. The top profile snaps into the base profile with the curved toothed joint bar and automatically adapts to the floor covering - variable in height and inclination. The profile fits snugly on both sides, even with large differences in level. At the same time, the curved toothing allows easy removal. If necessary, the top profile can be detached and then anchored back into the base profile.Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tons.Details at a glanceClip profile system with aluminum top profile and plastic base profile. Automatic adjustment in height and inclination. Simple, quick installation - easy disassembly and reusability. For covering thicknesses 7 - 15 mm. Height compensation up to 6 mm.
PROFI-TEC Master end profile no. 308, 28 mmThe Profi-Tec clip profile system is designed for flooring thicknesses from 8 to 14 mm. Concealed fastening gives Profi-Tec profiles a perfect look without screw holes. Fitting is particularly quick and easy. The top profile snaps into the base profile with the curved toothed joint bar and automatically adapts to the floor covering - variable in height and inclination. The profile fits snugly on both sides, even with large differences in level. At the same time, the curved toothing allows easy removal. The top profile can be detached if necessary and then re-anchored in the base profile.Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tons.Details at a glanceClip profile system with aluminum top profile and plastic base profile. Automatic adjustment in height and inclination. Simple, quick installation - easy disassembly and reusability. For decking thicknesses 8 - 14 mm. Ideal for wall connections and for finishing balcony doors.
PROFI-TEC Master adjustment profile no. 304, 47 mmThe Profi-Tec clip profile system is designed for flooring thicknesses from 7 to 17.5 mm. Concealed fastening gives Profi-Tec profiles a perfect appearance without screw holes. Fitting is particularly quick and easy. The top profile snaps into the base profile with the curved toothed joint bar and automatically adapts to the floor covering - variable in height and inclination. The profile fits snugly on both sides, even with large differences in level. At the same time, the curved toothing allows easy removal. The top profile can be detached if necessary and then re-anchored in the base profile.Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tons.Details at a glanceClip profile system with aluminum top profile and plastic base profile. Automatic adjustment in height and inclination. Simple, quick installation - easy disassembly and reusability. For covering thicknesses 7 - 17.5 mm. Height compensation from 17.5 mm down to 0 mm.
Prinz PROFI-TEC MASTER Transition Profile 34 mm - No. 301 - Beech - 90 cmPROFI-TEC MASTER transition profile - For floor covering thicknesses of 7 - 15 mm.Transition ProfileThe transition profile creates a clean and visually appealing transition between two adjoining floor coverings. It protects the covering edges from damage and creates a durable, professional finish in residential and commercial areas.Profile SystemThe PROFI-TEC clip profile system impresses with concealed fastening, easy installation and permanently secure hold. The top profile snaps securely into the base profile and automatically adapts in height and inclination to the floor covering. At the same time, the system enables a clean appearance without visible screw holes.Material & QualityThe aluminium profile impresses with its low weight, high stability and excellent corrosion resistance. It is durable, easy to care for and ideally suited for floor finishes in residential and commercial areas.Quality by Prinz ProfilePrinz Profile has stood for quality, precision and innovative interior fitting solutions for decades. High-quality materials, careful workmanship and well-designed profile systems ensure durable and reliable floor finishes. Whether for renovation or new construction, Prinz offers the right solution for almost every installation situation in residential and commercial areas.
Content: 0.9 M (€18.67 / 1 M)
PROFI-TEC Master end profile no. 308, 28 mmThe Profi-Tec clip profile system is designed for flooring thicknesses from 8 to 14 mm. Concealed fastening gives Profi-Tec profiles a perfect appearance without screw holes. Fitting is particularly quick and easy. The top profile snaps into the base profile with the curved toothed joint bar and automatically adapts to the floor covering - variable in height and inclination. The profile fits snugly on both sides, even with large differences in level. At the same time, the curved toothing allows easy removal. The top profile can be detached if necessary and then re-anchored in the base profile.Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tons.Details at a glanceClip profile system with aluminum top profile and plastic base profile. Automatic adjustment in height and inclination. Simple, quick installation - easy disassembly and reusability. For decking thicknesses 8 - 14 mm. Ideal for wall connections and for finishing balcony doors.
Content: 2.7 M (€14.44 / 1 M)
Transition profile no. 132, 38 mmAluminum profile, self-adhesive. Transition profiles create transitions between almost any floor coverings of the same height. Available in a wide variety of widths, shapes, materials and colors, the profiles can be installed quickly and easily.
Content: 2.7 M (€7.40 / 1 M)
PROFI-DESIGN transition profile no. 322, 27 mmThe Profi-Design clip profile system was specially developed for floating design floor coverings. The toothed profile bars of the upper profile snap securely into the trapezoidal mounts of the base profile. This allows the top profile to tilt slightly and adjust variably in height and inclination to the floor covering. The narrow, flat profiles have a particularly attractive appearance and also offer generous expansion joints for dimensional fluctuations in the floor covering. If required, the top profiles can be detached and then re-anchored in the base profile.Details at a glanceClip profile system with aluminum top profile and plastic base profile. Designed for design flooring with covering thicknesses of 4 - 7.5 mm. Height compensation up to 3 mm. Automatic height and inclination adjustment. Simple, quick installation - easy disassembly and reusability.
PROFI-DESIGN adaptation profile no. 323, 34 mmThe Profi-Design clip profile system was specially developed for floating design floor coverings. The toothed profile bars of the upper profile snap securely into the trapezoidal mounts of the base profile. This allows the top profile to tilt slightly and adjust variably in height and inclination to the floor covering. The narrow, flat profiles have a particularly attractive appearance and also offer generous expansion joints for dimensional fluctuations in the floor covering. If required, the top profiles can be detached and then re-anchored in the base profile.Details at a glanceClip profile system with aluminum top profile and plastic base profile. Designed for design flooring with covering thicknesses of 4 - 7.5 mm. Height adjustment from 7.5 mm down to 0 mm. Automatic height and inclination adjustment. Simple, quick installation - easy disassembly and reusability.
Prinz PS 400 Transition Profile 39 mm - No. 424 - Matt Stainless Steel - 90 cmPS 400 transition profile - For floor covering thicknesses of 7 - 17,5 mm.Transition ProfileThe transition profile creates a clean and visually appealing transition between two adjoining floor coverings. It protects the covering edges from damage and creates a durable, professional finish in residential and commercial areas.Profile SystemUniversal profiles are the flexible solution for numerous applications around floor coverings. Depending on the design, they are suitable for transitions, finishes or edge protection and provide a clean, professional appearance. High-quality materials and durable workmanship ensure reliable use in residential and commercial areas.Material & QualityThe aluminium profile impresses with its low weight, high stability and excellent corrosion resistance. It is durable, easy to care for and ideally suited for floor finishes in residential and commercial areas.Quality by Prinz ProfilePrinz Profile has stood for quality, precision and innovative interior fitting solutions for decades. High-quality materials, careful workmanship and well-designed profile systems ensure durable and reliable floor finishes. Whether for renovation or new construction, Prinz offers the right solution for almost every installation situation in residential and commercial areas.
Content: 0.9 M (€21.50 / 1 M)
PROFI-TEC Master adjustment profile no. 304, 47 mmThe Profi-Tec clip profile system is designed for flooring thicknesses from 7 to 17.5 mm. Concealed fastening gives Profi-Tec profiles a perfect appearance without screw holes. Fitting is particularly quick and easy. The top profile snaps into the base profile with the curved toothed joint bar and automatically adapts to the floor covering - variable in height and inclination. The profile fits snugly on both sides, even with large differences in level. At the same time, the curved toothing allows easy removal. The top profile can be detached if necessary and then re-anchored in the base profile.Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tons.Details at a glanceClip profile system with aluminum top profile and plastic base profile. Automatic adjustment in height and inclination. Simple, quick installation - easy disassembly and reusability. For covering thicknesses 7 - 17.5 mm. Height compensation from 17.5 mm down to 0 mm.
Content: 2.7 M (€18.15 / 1 M)
PROFI-DESIGN transition profile no. 322, 27 mmThe Profi-Design clip profile system was specially developed for floating design floor coverings. The toothed profile bars of the top profile snap securely into the trapezoidal mounts of the base profile. This allows the top profile to tilt slightly and adjust variably in height and inclination to the floor covering. The narrow, flat profiles have a particularly attractive appearance and also offer generous expansion joints for dimensional fluctuations in the floor covering. If required, the top profiles can be detached and then re-anchored in the base profile.Details at a glanceClip profile system with aluminum top profile and plastic base profile. Designed for design flooring with covering thicknesses of 4 - 7.5 mm. Height compensation up to 3 mm. Automatic height and inclination adjustment. Simple, quick installation - easy disassembly and reusability.
Content: 2.7 M (€9.26 / 1 M)
PROFI-DESIGN adaptation profile no. 323, 34 mmThe Profi-Design clip profile system was specially developed for floating design floor coverings. The toothed profile bars of the upper profile snap securely into the trapezoidal mounts of the base profile. This allows the top profile to tilt slightly and adjust to the height and angle of the floor covering. The narrow, flat profiles have a particularly attractive appearance and also offer generous expansion joints for dimensional fluctuations in the floor covering. If required, the top profiles can be detached and then re-anchored in the base profile.Details at a glanceClip profile system with aluminum top profile and plastic base profile. Designed for design flooring with covering thicknesses of 4 - 7.5 mm. Height adjustment from 7.5 mm down to 0 mm. Automatic height and inclination adjustment. Simple, quick installation - easy disassembly and reusability.
Content: 2.7 M (€9.26 / 1 M)
PROFI-DESIGN end profile no. 324, 21 mmThe Profi-Design clip profile system was specially developed for floating design floor coverings. The toothed profile bars of the top profile snap securely into the trapezoidal mounts of the base profile. This allows the top profile to tilt slightly and adjust variably in height and inclination to the floor covering. The narrow, flat profiles have a particularly attractive appearance and also offer generous expansion joints for dimensional fluctuations in the floor covering. If required, the top profiles can be detached and then re-anchored in the base profile.Details at a glanceClip profile system with aluminum top profile and plastic base profile. Designed for design floor coverings with covering thicknesses of 4 - 7.5 mm. Automatic adjustment in height and inclination. Simple, quick installation - easy to dismantle and reuse. Ideal for wall connections and the end of balcony doors.
Content: 2.7 M (€9.63 / 1 M)
PROFI-DESIGN end profile no. 324, 21 mmThe Profi-Design clip profile system was specially developed for floating design floor coverings. The toothed profile bars of the top profile snap securely into the trapezoidal mounts of the base profile. This allows the top profile to tilt slightly and adjust variably in height and inclination to the floor covering. The narrow, flat profiles have a particularly attractive appearance and also offer generous expansion joints for dimensional fluctuations in the floor covering. If required, the top profiles can be detached and then re-anchored in the base profile.Details at a glanceClip profile system with aluminum top profile and plastic base profile. Designed for design coverings with covering thicknesses of 4 - 7.5 mm. Automatic adjustment in height and inclination. Simple, quick installation - easy to dismantle and reuse. Ideal for wall connections and for finishing balcony doors.
Transition profile no. 132, 38 mmAluminum profile, self-adhesive. Transition profiles create transitions between almost any floor coverings of the same height. Available in a wide variety of widths, shapes, materials and colors, the profiles can be installed quickly and easily.
Content: 2.7 M (€7.40 / 1 M)
Stair nosing profile no. 173, 23 mmPrinz stair nosing profiles reliably protect the edges of the floor covering on the edge of the step. The grooved surface increases safety on the edge of the step.Stair nosing profile made of aluminum. Recessed screw holes.
Content: 2.5 M (€5.48 / 1 M)
Top offers for floor profiles - quality at the best price
Discover our high-quality floor profiles at reduced prices! In our offers category, you will find transition, adjustment and end profiles in a variety of colors and designs that are not only functional but also stylish. Whether for laminate, parquet, vinyl or designer flooring, we have the right solution for you at the best price.
Our floor profiles offer you the perfect combination of quality and price advantage. Create seamless transitions and protect your floor coverings without sacrificing style and elegance. Take advantage of this offer and get the profile you want at unbeatable prices!
Benefit from our attractive discounts and make your flooring projects a success with high-quality profiles. Our offers are limited - so get them now and save!