Filter products
Skirting Board Adhesive Reliable Installation Without Nails or ScrewsOur high-quality skirting board adhesive is ideal for the easy and reliable installation of skirting boards, floor trims and decorative mouldings. This solvent-free water-based mounting adhesive offers instant grab, high final bond strength and low-odour application.Thanks to its gap-filling properties, the adhesive compensates for minor surface irregularities and provides a clean and long-lasting bond for indoor applications.Coverage per Cartridge at a GlanceSkirting boards up to 40 mm high: approx. 1520 m Skirting boards 60100 mm high: approx. 1015 m Skirting boards 100150 mm high: approx. 1012 m The stated coverage values are estimates and may vary depending on the surface and amount of adhesive applied.Benefits and FeaturesInstant grab for quick and reliable adhesion High final bond strength for long-lasting bonds Solvent-free and water-based low odour Gap-filling properties to compensate for minor surface irregularities Easy application using standard cartridge guns Applications and Suitable SurfacesThe adhesive is suitable for installing skirting boards, floor trims and decorative mouldings on concrete, masonry, plaster, wood, metal and PVC. It is also suitable for bonding polystyrene (EPS) and expanded polyurethane.Technical SpecificationsContent: 310 ml / cartridgeColour: WhiteAdhesive base: Water-based synthetic elastomer emulsionTemperature resistance: 25 °C to +70 °CCoverage: One cartridge covers approximately 1025 linear metres of skirting boards, depending on board height, adhesive application and wall condition.Application Notes and TipsThe mounting adhesive is ready to use and can be easily applied with standard cartridge guns. It offers a practical alternative to fixing with clips, nails or screws.Tip: For optimal adhesion, bonding surfaces must be firm, clean, dry and free from dust and grease. The suitability of the material combination should be checked before installation.
Panel and Trim Adhesive Strong Bonding for Panels and Skirting BoardsOur high-quality panel and trim adhesive is ideal for the easy and reliable installation of acoustic panels, wall panels, skirting boards and decorative mouldings. This solvent-free hybrid polymer mounting adhesive offers high initial tack (High Tack), permanent elasticity and low-odour application.Thanks to its strong adhesion to a wide range of materials, the adhesive provides a clean and long-lasting bond without visible screws or nails. Ideal for demanding indoor and outdoor installation work.Coverage per Cartridge at a GlanceAcoustic panels: approx. 12 panels per cartridgeSkirting boards: approx. 1020 linear metres per cartridgeThe stated coverage values are estimates and may vary depending on panel size, skirting board height, adhesive application and surface conditions.Benefits and FeaturesHigh initial tack (High Tack) of at least 150 kg/m²Permanently elastic for durable and flexible bondsSolvent-, isocyanate- and phthalate-free low odourUV- and weather-resistant suitable for indoor and outdoor useCan also be applied to slightly damp surfacesVery easy to apply using standard cartridge gunsPaintable after curing with suitable paintsNon-corrosive when bonding metalsApplications and Suitable SurfacesThe mounting adhesive is suitable for installing wall panels, wood, MDF, OSB and chipboard panels, as well as skirting boards, floor trims and decorative mouldings.It bonds to a wide range of suitable surfaces, including concrete, masonry, plaster, wood, metal, stone, glass, ceramics and compatible plastics.Technical SpecificationsContent: 290 ml / cartridgeAdhesive base: One-component hybrid polymerInitial tack: at least 150 kg/m²Skin formation time: approx. 15 minutes at 23 °C and 50% relative humidityApplication temperature: +5 °C to +40 °CTemperature resistance: ?40 °C to +90 °CApplication Notes and TipsThe mounting adhesive is ready to use and can be easily applied with standard cartridge guns. Apply the adhesive in vertical beads or dots to the prepared bonding surfaces. Position the components within 10 minutes and press firmly into place.Tip: For optimal adhesion, bonding surfaces must be firm, clean and free from dust and grease. Dry surfaces are preferred. The suitability of felt-backed acoustic panels should be checked with a test bond before installation. Not suitable for PE, PP, PA, PTFE, polyacrylate or polycarbonate.
Mounting adhesive for wooden, plastic, and metal baseboards - 310 ml cartridgeThis high-quality mounting adhesive has been specially developed for mounting baseboards made of wood, plastic, and metal. Thanks to its strong initial adhesion and fast curing, it is ideal for secure, permanent and invisible fastenings to walls and floors, both indoors and outdoors. Advantages & properties:Very high initial adhesion for fast hold Fast curing and high final strength Solvent-free and plasticizer-free - low odor and environmentally friendly Weather-resistant and light-resistant Technical data:Contents: 310 ml / cartridgeConsumption: Sufficient for up to 25 m - depending on the height of the skirting board and the condition of the wallAreas of application:The adhesive bonds reliably to wood, aluminum, iron, steel, plastics as well as fiber cement, concrete, and plaster. This makes it ideal for a wide variety of skirting board types and substrates. Note:The adhesive is easy to apply using standard cartridge guns. It offers a clever alternative to clip fastenings, especially on difficult wall surfaces. Tip: For optimum adhesion, we recommend cleaning the adhesive surfaces beforehand and keeping them dry.
Assembly adhesive especially for acoustic panels and skirting boardsVery high and fast initial adhesion, fast through-curing and high final strength. easy to press out non-foaming Water and UV resistant can be used indoors and outdoorsfor almost all substrates bonds and seals everything can be elastically loaded when cured, can be sanded and painted over very good adhesion to absorbent as well as non-absorbent substrates such as wood, metal, plastic, glass, concrete, stone, etc.Content: 290ml/cartridge Consumption: One cartridge is sufficient for at least 1-2 acoustic panels, depending on the installation location and type. When used for skirting boards, one cartridge is enough for up to 25m depending on the height of the skirting board and the nature of the substrate.
Assembly adhesive Collo-Pur Turbo - the fast and strong assembly adhesivethe fastest assembly adhesive of its kind at present extremely high initial adhesion and short setting time. environmentally friendly and non-foaming weather-resistant and lightfast sandable and paintable can be used indoors and outdoors Content: 310ml/cartridge Consumption: One cartridge is sufficient for up to 25m depending on the height of the skirting and the wall condition.Range of application: Heso-Collo-Pur Turbo is ideally suited for bonding mouldings as well as for combination bonding with wood-based materials, metal, plastic, concrete, stone, brick, decorative panels, wall cladding, rigid foam insulation panels and glass when the surfaces are appropriately pretreated.
Heso-Tack-D - Highly adhesive dispersion-based mounting adhesive (310 ml cartridge)Heso-Tack-D mounting adhesive is an extremely strong 1K adhesive based on dispersion, specially developed for the reliable mounting of skirting boards, panels, stucco profiles and other materials in interior construction. With its high initial adhesion and fast curing, this adhesive offers an ideal solution for professional and private applications - completely without solvents. Product features:1K dispersion-based assembly adhesive Very high initial adhesion for immediate hold Fast curing - ideal for quick assembly Solvent-free and odorless Paint-compatible - can be painted over after curingTechnical data:Contents: 310 ml / cartridgeConsumption: One cartridge is sufficient for up to 25 m, depending on the height of the molding and the condition of the wallPossible applications:Heso-Tack-D adhesive is ideal for assembly and repair bonding in all interior areas, e.g. for: Skirting boards, strip coverings, sign fixings Panels, stucco profiles, decorative and insulating boards Styrofoam, wood and wood-based materials Plastics such as PVC Plasterboard and mineral materials Corrosion-protected metals Application instructions:For optimum adhesion, at least one of the surfaces to be bonded should be porous or absorbent. Once fully cured, the product is odorless, physiologically harmless and neutral. Note: The product is applied using a standard cartridge gun. Suitable for all common substrates in drywall construction and interior finishing.
Premium Acrylic Sealant - 310 mlThis high-quality, 1-component, acrylate-based sealant is the perfect solution for sealing and waterproofing indoors and outdoors. Thanks to its excellent processing and adhesive properties, the acrylic sealant is ideal for demanding DIY and craft work. Properties:Suitable for indoor and outdoor use Very good processing and adhesive properties Color: Premium white Early rainproof & UV-resistant Plasto-elastic, paintable & can be painted over Emicode EC1 Plus: very low emissions Universal application:Ideal for sealing and sealing connection joints or cracks in:Window and door frames Ceilings, floors, walls, and facades Stairs, baseboards, and stucco moldings Concrete, plaster, and other building substrates Contents:310 ml / cartridge
Premium universal neutral Silicon - 310 ml
Content: 0.31 ml (€25.65 / 1 ml)
Allcon 10 construction adhesive Universally applicable one-component construction adhesive, in professional quality. Tested according to DIN EN 204 D4 connects almost all materials easy handling Solvent and silicone free weather and aging resistant Resistant to many chemicals Frost-proof high final strength Compatible with natural stoneProcessing advantages: Processing using standard cartridge presses already loadable after approx. 7 to 10 minutes replaces many other adhesives and glues always the right product at hand Security in the application opened cartridge can be kept for approx. 10 months, unopened for approx. 18 months easy to dose, paintable and recoatable can be used indoors and outdoors Areas of application: Combination of wood, chipboard, fiberboard, MDF, coated panels, metals, aluminum, natural stone, artificial stone such as Corian and Varicor, concrete, marble, ceramics, acrylic, plastics, plasterboard, styrofoam, rigid foam, insulation and much more fasten and secure dowels in the masonry
Allcon 10 construction adhesive Universally applicable one-component construction adhesive, in professional quality. Tested according to DIN EN 204 D4 connects almost all materials easy handling Solvent and silicone free weather and aging resistant Resistant to many chemicals Frost-proof high final strength Compatible with natural stoneProcessing advantages: Processing using standard cartridge presses already loadable after approx. 7 to 10 minutes replaces many other adhesives and glues always the right product at hand Security in the application opened cartridge can be kept for approx. 10 months, unopened for approx. 18 months easy to dose, paintable and recoatable can be used indoors and outdoors Areas of application: Combination of wood, chipboard, fiberboard, MDF, coated panels, metals, aluminum, natural stone, artificial stone such as Corian and Varicor, concrete, marble, ceramics, acrylic, plastics, plasterboard, styrofoam, rigid foam, insulation and much more fasten and secure dowels in the masonry
Adhesives and sealants - For a perfect seal and reliable bonding
Our adhesives and sealants offer you a high-quality selection of products that have been specially developed for professional applications indoors and outdoors. Whether you need them for sealing, grouting or for permanently bonding materials, you will find everything you need for your construction projects here. Our adhesives and sealants are versatile and ensure a strong, flexible and weather-resistant connection that can withstand both moisture and temperature fluctuations. Ideal for mounting baseboards, profiles and panels.
Choose quality and reliability and find the right products for a safe and long-lasting application.