Filter products
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 0.9 M (€17.22 / 1 M)
Prinz transition profile 90 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, easy disassembly and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIncludes base profile, grey. The aluminium clip profile system is designed for covering thicknesses of 7 to 15 mm. With the raise profile "Beige" even covering thicknesses up to 17.5 mm can be achieved. Concealed fastened, these profiles offer a perfect look without screw holes.Technical data at a glance:Transition profile - black anodised L= 90 cmMaterial: aluminiumFor floor covering thicknesses 7 - 15 mm (up to 17.5 mm with raising profile)Height compensation up to 6 mm Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile fits tightly on both sides.At the same time, the curved toothing allows problem-free dismantling.The top profile can be detached if necessary and then anchored back into the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.
Content: 0.9 M (€19.89 / 1 M)
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 0.9 M (€15.44 / 1 M)
ECO-CLIP transition profile 90 cm in matt stainless steel - powerful and easy processing! ECO-CLIP is a new profile system for the floating installation of floor coverings . ECO-CLIP profiles correspond to the new design line without decorative grooves and in a flat design . Fantastic look thanks to concealed fastening Automatic adjustment in height and inclination Simple, quick and safe installation Upper profile can be easily dismantled at any time The ECO-CLIP profile system is designed for covering thicknesses of 6 to 12 mm . Thanks to the practical clip system, this transition profile can be installed quickly and easily . In addition, it offers a perfect, modern look without screw holes, if sufficient Space for expansion joints. Technical data at a glance: Transition profile - matt stainless steel Dimensions 30 x 900 mm For covering thicknesses 6 - 12 mm Height compensation up to 4 mm Cover profile made of aluminum Lower profile made of impact-resistant plastic Assembly: Installation is particularly quick and easy. The base profile made of impact-resistant plastic is glued to the substrate. For gluing the lower profile, we recommend assembly adhesive, you can find this in our accessories. After laying the floor covering, e.g. laminate, the top profile is locked into the base profile. The groove of the base profile is trapezoidal so that the web of the upper profile can be tilted easily. The upper profiles can thus automatically adapt to the floor covering - variable in height and incline. At the same time, the toothing allows easy dismantling.
Content: 0.9 M (€15.00 / 1 M)
Aluminium. For covering thicknesses 7-15 mm. Flat design without grooves. Height compensation up to 6 mm. Including base section, grey.
Content: 0.9 M (€20.56 / 1 M)
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 2.7 M (€15.74 / 1 M)
Aluminium. For covering thicknesses 7-15 mm. Flat design without grooves. Height compensation up to 6 mm. Including base section, grey.
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 2.7 M (€14.63 / 1 M)
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
ECO-CLIP transition profile 2.70 m in matt stainless steel - powerful and simple processing! ECO-CLIP is a new profile system for the floating installation of floor coverings . ECO-CLIP profiles correspond to the new design line without decorative grooves and in a flat design . Fantastic look thanks to concealed fastening Automatic adjustment in height and inclination Simple, quick and safe installation Upper profile can be easily dismantled at any time The ECO-CLIP profile system is designed for covering thicknesses of 6 to 12 mm . Thanks to the practical clip system, this transition profile can be installed quickly and easily . In addition, it offers a perfect, modern look without screw holes, if sufficient Space for expansion joints. Technical data at a glance: Transition profile - matt stainless steel Dimensions 30 x 2,700 mm For covering thicknesses 6 - 12 mm Height compensation up to 4 mm Cover profile made of aluminum Lower profile made of impact-resistant plastic Assembly: Installation is particularly quick and easy. The base profile made of impact-resistant plastic is glued to the substrate. For gluing the lower profile, we recommend assembly adhesive, you can find this in our accessories. After laying the floor covering, e.g. laminate, the top profile is locked into the base profile. The groove of the base profile is trapezoidal so that the web of the upper profile can be tilted easily. The upper profiles can thus automatically adapt to the floor covering - variable in height and incline. At the same time, the toothing allows easy dismantling.
Content: 2.7 M (€14.26 / 1 M)
Prinz transition profile 270 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, problem-free disassembly and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIncludes base profile, grey. The aluminium clip profile system is designed for covering thicknesses of 7 to 15 mm. With the raise profile "Beige" even covering thicknesses up to 17.5 mm can be achieved. Concealed fastened, these profiles offer a perfect look without screw holes.Technical data at a glance:Transition profile - black anodised L= 270 cmMaterial: aluminiumFor floor covering thicknesses 7 - 15 mm (up to 17.5 mm with raising profile)Height compensation up to 6 mm .Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile fits tightly on both sides.At the same time, the curved toothing allows problem-free dismantling.The top profile can be detached if necessary and then anchored back into the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.
Content: 2.7 M (€20.93 / 1 M)
ECO-CLIP transition profile 90 cm in silver - powerful and easy processing! ECO-CLIP is a new profile system for the floating installation of floor coverings . ECO-CLIP profiles correspond to the new design line without decorative grooves and in a flat design . Fantastic look thanks to concealed fastening Automatic adjustment in height and inclination Simple, quick and safe installation Upper profile can be easily dismantled at any time The ECO-CLIP profile system is designed for covering thicknesses of 6 to 12 mm . Thanks to the practical clip system, this transition profile can be installed quickly and easily . In addition, it offers a perfect, modern look without screw holes, if sufficient Space for expansion joints. Technical data at a glance: Transition profile - silver Dimensions 30 x 900 mm For covering thicknesses 6 - 12 mm Height compensation up to 4 mm Cover profile made of aluminum Lower profile made of impact-resistant plastic Assembly: Installation is particularly quick and easy. The base profile made of impact-resistant plastic is glued to the substrate. For gluing the lower profile, we recommend assembly adhesive, you can find this in our accessories. After laying the floor covering, e.g. laminate, the top profile is locked into the base profile. The groove of the base profile is trapezoidal so that the web of the upper profile can be tilted easily. The upper profiles can thus automatically adapt to the floor covering - variable in height and incline. At the same time, the toothing allows easy dismantling.
Content: 0.9 M (€13.89 / 1 M)
Profi-Tec transition profile 1m - Powerful and simple processing.Elegant design, high frictional connection, problem-free disassembly and maximum load-bearing capacity - these are the strengths of the clip profile system. automatic adjustment in height and inclination. Simple, quick and safe assembly. Includes base profile. The aluminium clip profile system is designed for Plank thicknesses from 6 to 11 mm. Concealed mounted, these profiles offer a perfect look without screw holes. Technical data at a glance: Transition profile - silver L = 100 cm Material: aluminium for covering thicknesses 6 - 11mm Height compensation up to 3mm Assembly:The assembly is especially quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering -. variable in height and inclination. Even with strong differences in level, the profile lies close on both sides. At the same time, the curved toothing allows the Easily dismantled.The top profile can be detached if necessary and then re-anchored to the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for dynamic load of 1,100 N over 80,000 load cycles and a static load of up to 4,000 N.
Aluminium. For covering thicknesses 7-15 mm. Height compensation up to 6 mm. Including base section, grey.
Content: 0.9 M (€18.78 / 1 M)
Aluminium. For covering thicknesses 7-15 mm. Flat design without grooves. Height compensation up to 6 mm. Including base section, grey.
Content: 2.7 M (€20.93 / 1 M)
Profi-Tec transition profile 90 cm - Powerful and easy processing.Elegant design, high frictional connection, problem-free disassembly and maximum load-bearing capacity - these are the strengths of the clip profile system. automatic adjustment in height and inclination. Simple, quick and safe assembly. Includes base profile. The aluminium clip profile system is designed for Plank thicknesses from 6 to 11 mm. Concealed mounted, these profiles offer a perfect look without screw holes. Technical data at a glance: Transition profile - silver L = 90 cm Material: aluminium for covering thicknesses 6 - 11mm Height compensation up to 3mm Assembly:The assembly is especially quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering -. variable in height and inclination. Even with strong differences in level, the profile lies close on both sides. At the same time, the curved toothing allows the Easily dismantled.The top profile can be detached if necessary and then re-anchored to the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for dynamic load of 1,100 N over 80,000 load cycles and a static load of up to 4,000 N.
Content: 0.9 M (€13.89 / 1 M)
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Prinz PROFI-TEC MASTER Transition Profile 34 mm - No. 303 - Matt Stainless Steel - 90 cmPROFI-TEC MASTER transition profile - For floor covering thicknesses of 7 - 15 mm.Transition ProfileThe transition profile creates a clean and visually appealing transition between two adjoining floor coverings. It protects the covering edges from damage and creates a durable, professional finish in residential and commercial areas.Profile SystemThe PROFI-TEC clip profile system impresses with concealed fastening, easy installation and permanently secure hold. The top profile snaps securely into the base profile and automatically adapts in height and inclination to the floor covering. At the same time, the system enables a clean appearance without visible screw holes.Material & QualityThe aluminium profile impresses with its low weight, high stability and excellent corrosion resistance. It is durable, easy to care for and ideally suited for floor finishes in residential and commercial areas.Quality by Prinz ProfilePrinz Profile has stood for quality, precision and innovative interior fitting solutions for decades. High-quality materials, careful workmanship and well-designed profile systems ensure durable and reliable floor finishes. Whether for renovation or new construction, Prinz offers the right solution for almost every installation situation in residential and commercial areas.
Content: 0.9 M (€18.17 / 1 M)
Universal transition profile 50mm made of aluminum in silverThe wide transition also offers the possibility of height compensation up to max. 16mm.. Fastening is via the guide rail on the back of the profile. Concealed fastening gives this profile a perfect look, without screw holes.Mounting: Screw fastening (screws and dowels are included in the set)
Content: 0.93 M (€9.67 / 1 M)
Universal transition profile 50 mm made of aluminum in silverThe wide transition also offers the possibility of height compensation up to max. 16mm.. Fastening is via the guide rail on the back of the profile. Concealed fastening gives this profile a perfect look, without screw holes.Mounting: Screw fastening (screws and dowels are included in the set)
Content: 1.8 M (€8.97 / 1 M)
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 0.9 M (€17.22 / 1 M)
ECO-CLIP transition profile 2,70 in silver - powerful and easy processing! ECO-CLIP is a new profile system for the floating installation of floor coverings . ECO-CLIP profiles correspond to the new design line without decorative grooves and in a flat design . Fantastic look thanks to concealed fastening Automatic adjustment in height and inclination Simple, quick and safe installation Upper profile can be easily dismantled at any time The ECO-CLIP profile system is designed for covering thicknesses of 6 to 12 mm . Thanks to the practical clip system, this transition profile can be installed quickly and easily . In addition, it offers a perfect, modern look without screw holes, if sufficient Space for expansion joints. Technical data at a glance: Transition profile - silver Dimensions 30 x 2.700 mm For covering thicknesses 6 - 12 mm Height compensation up to 4 mm Cover profile made of aluminum Lower profile made of impact-resistant plastic Assembly: Installation is particularly quick and easy. The base profile made of impact-resistant plastic is glued to the substrate. For gluing the lower profile, we recommend assembly adhesive, you can find this in our accessories. After laying the floor covering, e.g. laminate, the top profile is locked into the base profile. The groove of the base profile is trapezoidal so that the web of the upper profile can be tilted easily. The upper profiles can thus automatically adapt to the floor covering - variable in height and incline. At the same time, the toothing allows easy dismantling.
Content: 2.7 M (€14.26 / 1 M)
Aluminium. For covering thicknesses 7-15 mm. Height compensation up to 6 mm. Including base section, grey.
Content: 2.7 M (€17.37 / 1 M)
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 2.7 M (€16.48 / 1 M)
Aluminium. For covering thicknesses 7-15 mm. Height compensation up to 6 mm. Including base section, grey.
Content: 0.9 M (€18.33 / 1 M)
Aluminium. For covering thicknesses 7-15 mm. Height compensation up to 6 mm. Including base section, grey.
Content: 2.7 M (€16.63 / 1 M)
Prinz PROFI-TEC MASTER Transition Profile 34 mm - No. 303 - Matt Stainless Steel - 270 cmPROFI-TEC MASTER transition profile - For floor covering thicknesses of 7 - 15 mm.Transition ProfileThe transition profile creates a clean and visually appealing transition between two adjoining floor coverings. It protects the covering edges from damage and creates a durable, professional finish in residential and commercial areas.Profile SystemThe PROFI-TEC clip profile system impresses with concealed fastening, easy installation and permanently secure hold. The top profile snaps securely into the base profile and automatically adapts in height and inclination to the floor covering. At the same time, the system enables a clean appearance without visible screw holes.Material & QualityThe aluminium profile impresses with its low weight, high stability and excellent corrosion resistance. It is durable, easy to care for and ideally suited for floor finishes in residential and commercial areas.Quality by Prinz ProfilePrinz Profile has stood for quality, precision and innovative interior fitting solutions for decades. High-quality materials, careful workmanship and well-designed profile systems ensure durable and reliable floor finishes. Whether for renovation or new construction, Prinz offers the right solution for almost every installation situation in residential and commercial areas.
Content: 2.7 M (€18.13 / 1 M)
Prinz PROFI-TEC MASTER Transition Profile 34 mm - No. 303 - Matt Stainless Steel - 100 cmPROFI-TEC MASTER transition profile - For floor covering thicknesses of 7 - 15 mm.Transition ProfileThe transition profile creates a clean and visually appealing transition between two adjoining floor coverings. It protects the covering edges from damage and creates a durable, professional finish in residential and commercial areas.Profile SystemThe PROFI-TEC clip profile system impresses with concealed fastening, easy installation and permanently secure hold. The top profile snaps securely into the base profile and automatically adapts in height and inclination to the floor covering. At the same time, the system enables a clean appearance without visible screw holes.Material & QualityThe aluminium profile impresses with its low weight, high stability and excellent corrosion resistance. It is durable, easy to care for and ideally suited for floor finishes in residential and commercial areas.Quality by Prinz ProfilePrinz Profile has stood for quality, precision and innovative interior fitting solutions for decades. High-quality materials, careful workmanship and well-designed profile systems ensure durable and reliable floor finishes. Whether for renovation or new construction, Prinz offers the right solution for almost every installation situation in residential and commercial areas.
Prinz PROFI-TEC MASTER Transition Profile 34 mm - No. 300 - Silver - 100 cmPROFI-TEC MASTER transition profile - For floor covering thicknesses of 7 - 15 mm.Transition ProfileThe transition profile creates a clean and visually appealing transition between two adjoining floor coverings. It protects the covering edges from damage and creates a durable, professional finish in residential and commercial areas.Profile SystemThe PROFI-TEC clip profile system impresses with concealed fastening, easy installation and permanently secure hold. The top profile snaps securely into the base profile and automatically adapts in height and inclination to the floor covering. At the same time, the system enables a clean appearance without visible screw holes.Material & QualityThe aluminium profile impresses with its low weight, high stability and excellent corrosion resistance. It is durable, easy to care for and ideally suited for floor finishes in residential and commercial areas.Quality by Prinz ProfilePrinz Profile has stood for quality, precision and innovative interior fitting solutions for decades. High-quality materials, careful workmanship and well-designed profile systems ensure durable and reliable floor finishes. Whether for renovation or new construction, Prinz offers the right solution for almost every installation situation in residential and commercial areas.
PS 400 XXL Übergangsprofil Sahara 49 mm PS 400 Profile überzeugen durch ihre zeitsparende und einfache Verarbeitung. Zunächst wird das Basisprofil auf dem Untergrund verschraubt und der Bodenbelag verlegt. Dabei ist eine ausreichende Dehnungsfuge zu berücksichtigen. Die Oberprofile passen sich stufenlos dem Bodenbelag an. Auch bei starken Niveauunterschieden schließen sie automatisch dicht an beiden Seiten ab. Mit den beigefügten Selbstbohrschrauben werden die Oberprofile im Basisprofil befestigt. Der Rundumkontakt der Schraube garantiert einen optimalen Kraftschluss; auch nach mehrjähriger Druck- und Zugbelastung entsteht kein Spiel. Aufgrund der starken, dauerhaften Verbindung ist das Profilsystem für höchste Belastungen geeignet. Details im Überblick Schraubprofilsystem mit Aluminium-Basisprofil und Aluminium-Oberprofil. Stufenlose Anpassung in Höhe und Neigung. Optimaler Kraftschluss durch Bohrschrauben. Geeignet für Belagsstärken von 17 - 27 mm. Höhenausgleich bis 9 mm.
Content: 2.7 M (€18.15 / 1 M)
Aluminum transition profiles for laminate and parquet flooring
Transition profiles made of robust aluminum ensure an elegant and secure transition between different floor coverings such as laminate and parquet.They reliably compensate for height differences and create a seamless transition-ideal for private and commercial areas.
Thanks to their sturdy construction, they are particularly durable and resistant to daily wear and tear. This makes them ideal for high-traffic areas such as hallways, entrance areas, or business premises.
Discover our versatile aluminum transition profiles in various lengths, widths, and designs - for a visually appealing and functional flooring solution.