Filter products
Stair nosing profile 45 x 40 mm silver 1.00 m - Reliable edge protection The stair nosing profile 45 x 40 mm reliably protects the edges of the floor covering on a step edge. The grooved surface also increases safety on the step edge. Stair nosing profile (W x H) 45 x 40 mm quick and safe assembly aluminum Security through corrugation Countersunk screw holes Application: The stair nosing profile is used at the end of the stairs, on steps or landings. It is suitable for elastic floor coverings, textile floor coverings, laminate / multilayer, etc. ... Assembly: screw fastening - suitable screws and dowels are included in the scope of delivery.
Stair nosing profile 40 x 26 mm - silverStair nosing profile for design coverings up to 3 mm, for the full-surface laying of design coverings on steps. The matching profiles protect the edges of the base.SpecificationsAluminium profile, silverDimensions 40 x 26 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 3 mmcountersunk screw holes15 screws and dowels are required for installation, these are not included in delivery
Content: 2.5 M (€7.98 / 1 M)
Stair nosing profile 45 x 40 mm silver 2.50 m - Reliable edge protection The stair nosing profile 45 x 40 mm reliably protects the edges of the floor covering on a step edge. The grooved surface also increases safety on the step edge. Stair nosing profile (W x H) 45 x 40 mm quick and safe assembly aluminum Security through corrugation Countersunk screw holes Application: The stair nosing profile is used at the end of the stairs, on steps or landings. It is suitable for elastic floor coverings, textile floor coverings, laminate / multilayer, etc. ... Assembly: screw fastening - suitable screws and dowels are not included in the scope of delivery. You can find a suitable fastening set in our accessories.
Content: 2.5 M (€10.78 / 1 M)
Stair nosing profile 42 x 28 mm - silverStair nosing profile for design coverings up to 5 mm, for the full-surface laying of design coverings on steps. The matching profiles protect the edges of the base.SpecificationsAluminium profile, silverDimensions 42 x 28 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 5 mmcountersunk screw holes15 screws and dowels are required for installation, these are not included in delivery
Content: 2.5 M (€8.78 / 1 M)
Stair nosing profile 39 x 25 mm - silverStair nosing profile for design coverings up to 2 mm, for the full-surface laying of design coverings on steps. The matching profiles protect the edges of the base.SpecificationsAluminium profile, silverDimensions 39 x 25 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 2 mmcountersunk screw holes15 screws and dowels are required for installation, these are not included in delivery
Content: 2.5 M (€7.58 / 1 M)
profiles in aluminium with sub-profile to screw in place, in long-life professional quality ideally suited to renovation or modernisation of staircases and landings.
Content: 2.5 M (€8.20 / 1 M)
Stair nosing profile 39,5 x 25,5 mm - silverStair nosing profile for design coverings up to 2,5 mm, for the full-surface laying of design coverings on steps. The matching profiles protect the edges of the base.SpecificationsAluminium profile, silverDimensions 39,5 x 25,5 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 2,5 mmcountersunk screw holes15 screws and dowels are required for installation, these are not included in delivery
Content: 2.5 M (€7.80 / 1 M)
Stair nosing profile 45 x 40 mm, matt stainless steel 1.00 m - Reliable edge protection The stair nosing profile 45 x 40 mm reliably protects the edges of the floor covering on a step edge. The grooved surface also increases safety on the step edge. Stair nosing profile (W x H) 45 x 40 mm quick and safe assembly aluminum Security through corrugation Countersunk screw holes Application: The stair nosing profile is used at the end of the stairs, on steps or landings. It is suitable for elastic floor coverings, textile floor coverings, laminate / multilayer, etc. ... Assembly: screw fastening - suitable screws and dowels are included in the scope of delivery.
Stair nosing 40 x 25 mm in silver - reliable edge protection.Prinz stair nosing profiles reliably protect the edges of the floor covering on the step edge. The grooved surface increases safety on the step edge.Stair nosing profile WxH 40 x 25 mm.Material: Aluminium, EN AW 6063.Machining: Sunk drilled.Mounting type: Screw fixing.Application:The stair nosing profile is used at the ends of stairs, on steps or landings. It is suitable for resilient floor coverings, textile floor coverings, laminate/multilayer, etc. ...Mounting: Screw fixing - suitable screws and dowels are included in the scope of delivery.
Stair nosing profile 39.5 x 25.5 mm - satin stainless steelStair nosing profile for design coverings up to 2.5 mm, for the full-surface installation of design coverings on stair treads. The matching profiles protect the edges of the covering.. Technical dataAluminium profile, matt stainless steel Dimension 39.5 x 25.5 x 2,500 mm for design coverings / LVT, resilient floor coverings up to 2.5 mm recessed screw holes 15 screws and dowels are required for installation, these are not included in delivery .Stair nosing profile 39.5 x 25.5 mm - satin stainless steelStair nosing profile for design coverings up to 2.5 mm, for the full-surface installation of design coverings on stair treads. The matching profiles protect the edges of the covering.. Technical dataAluminium profile, matt stainless steel Dimension 39.5 x 25.5 x 2,500 mm for design coverings / LVT, resilient floor coverings up to 2.5 mm recessed screw holes 15 screws and dowels are required for installation, these are not included in delivery
Content: 2.5 M (€9.16 / 1 M)
Stair nosing profile 42 x 28 mm - matt stainless steelStair nosing profile for design coverings up to 5 mm, for the full-surface laying of design coverings on steps. The matching profiles protect the edges of the base.SpecificationsAluminium profile, matt stainless steelDimensions 42 x 28 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 5 mmcountersunk screw holes15 screws and dowels are required for installation, these are not included in delivery
Content: 2.5 M (€10.38 / 1 M)
Stair nosing profile 40 x 26 mm - Black powder coated.Stair nosing profile for design coverings up to 3 mm, for the full-surface installation of design coverings on stair treads. The matching profiles protect the edges of the covering..Technical dataAluminium profile, black powder-coated.Dimension 40 x 26 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 3 mmrecessed screw holes
Content: 2.5 M (€10.78 / 1 M)
Stair nosing profile 39.5 x 25.5 mm - blackStair nosing profile for design coverings up to 2.5 mm, for the full-surface installation of design coverings on stair treads. The matching profiles protect the edges of the covering..Technical dataAluminium profile, matt stainless steelDimension 39.5 x 25.5 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 2.5 mmrecessed screw holes15 screws and dowels are required for installation, these are not included in delivery .Stair nosing profile 39.5 x 25.5 mm - satin stainless steelStair nosing profile for design coverings up to 2.5 mm, for the full-surface installation of design coverings on stair treads. The matching profiles protect the edges of the covering..Technical dataAluminium profile, matt stainless steelDimension 39.5 x 25.5 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 2.5 mmrecessed screw holes15 screws and dowels are required for installation, these are not included in delivery
Content: 2.5 M (€11.58 / 1 M)
LED-Diffusor für Treppenkantenprofil für LED-Treppenkantenprofil
Content: 2.5 M (€5.18 / 1 M)
Stair nosing profile 43.5 x 29.5 mm - silverStair nosing profile for design coverings from 6 to 6.5 mm, for full-surface installation of design coverings on stairs. The matching profiles protect the edges of the covering.Technical dataAluminum profile, silverDimensions 43.5 x 29.5 x 2,500 mmfor design floor coverings / LVT, elastic floor coverings between 6 and 6.5 mmrecessed screw holes15 screws and dowels are required for installation, these are not included in the scope of delivery
Content: 2.5 M (€10.78 / 1 M)
Stair nosing profile 42 x 28 mm - matt stainless steelStair nosing profile for design coverings up to 5 mm, for the full-surface laying of design coverings on steps. The matching profiles protect the edges of the base.SpecificationsAluminium profile, matt stainless steelDimensions 42 x 28 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 5 mmcountersunk screw holes15 screws and dowels are required for installation, these are not included in delivery
Content: 2.5 M (€13.18 / 1 M)
Stair nosing profile 45 x 10 mm - Silver.Stair nosing profile for design coverings up to 2,5 mm, for the full-surface installation of design coverings on stair treads. The matching profiles protect the edges of the covering..Technical dataAluminium profile, black powder-coated.Dimension 45 x 10 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 2,5 mmrecessed screw holes
Content: 2.5 M (€7.16 / 1 M)
Stair nosing profile 43.5 x 29.5 mm - matt stainless steelStair nosing profile for design coverings from 6 to 6.5 mm, for full-surface installation of design coverings on stair treads. The matching profiles protect the edges of the covering.Technical dataAluminum profile, matt stainless steelDimensions 43.5 x 29.5 x 2,500 mmfor design coverings / LVT, resilient floor coverings between 6 and 6.5 mmrecessed screw holes15 screws and dowels are required for installation, these are not included in the scope of delivery
Content: 2.5 M (€11.98 / 1 M)
Stair nosing profile 40 x 26 mm - matt stainless steelStair nosing profile for design coverings up to 3 mm, for the full-surface laying of design coverings on steps. The matching profiles protect the edges of the base.SpecificationsAluminium profile, matt stainless steelDimensions 40 x 26 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 3 mmcountersunk screw holes15 screws and dowels are required for installation, these are not included in delivery
Content: 2.5 M (€9.18 / 1 M)
Stair nosing profile 30 x 20 mm silver 2,50 m - Reliable edge protection The stair nosing profile 30 x 20 mm reliably protects the edges of the floor covering on a step edge. The grooved surface also increases safety on the step edge. Stair nosing profile (W x H) 30 x 20 mm quick and safe assembly aluminum Security through corrugation without screw holes / unperforatedApplication: The stair nosing profile is used at the end of the stairs, on steps or landings. It is suitable for elastic floor coverings, textile floor coverings, laminate / multilayer, etc. ... Assembly: Adhesive fastening - The stair nosing profile can be fastened using mounting adhesive.
Content: 2.5 M (€6.38 / 1 M)
LED stair nosing profile 218 - Set accents with LED technology Revolutionize the world of living with LED technology. With this inexpensive and long-lasting technology, light can be used in almost any area - whether for design reasons or safety aspects b>. The stair nosing profile 218 has an LED channel that emits light downwards. The step below is optimally illuminated. This is not only for safety, but also creates a cozy atmosphere. The LED channel can be fitted with commercially available, self-adhesive LED strips B>can be equipped up to a width of 10 mm. Note: These are not included in the scope of delivery. Details at a glance: LED stair nosing No. 218, silvermaterial: aluminumcountersunk screw holeslight emission downwardsLED diffuser available separately: "04030723-00"Dimensions: 56 x 16 x 2,500 mm Area of #x200B;#x200B;application: The LED stair nosing profile 218 is preferably used when the step and riser has already been provided with a floor covering. The thickness of the flooring does not matter. The profile is therefore ideally suited for renovating existing steps. In addition, thanks to its stable construction , the profile enables the tread surfaces to be extended by up to 17 mm. < / P>Assembly: The profile is screwed onto the step edges mentioned above using suitable dowels and countersunk screws precisely on the existing steps above the laid floor covering. Make sure that there is some space for possible cables for the LED lighting . A translucent flap that is clipped on is available as an option to close the LED channel. It is not absolutely necessary to use it. The LED diffuser can be ordered separately.
Content: 2.5 M (€17.98 / 1 M)
Stair nosing profile 45 x 40 mm stainless steel matt 2.50 m - Reliable edge protection The stair nosing profile 45 x 40 mm reliably protects the edges of the floor covering on a step edge. The grooved surface also increases safety on the step edge. Stair nosing profile (W x H) 45 x 40 mm quick and safe assembly aluminum Security through corrugation Countersunk screw holes Application: The stair nosing profile is used at the end of the stairs, on steps or landings. It is suitable for elastic floor coverings, textile floor coverings, laminate / multilayer, etc. ... Assembly: screw fastening - suitable screws and dowels are not included in the scope of delivery. You can find a suitable fastening set in our accessories.
Content: 2.5 M (€11.98 / 1 M)
Stair nosing profile 45 x 10 mm - Black powder coated.Stair nosing profile for design coverings up to 2,5 mm, for the full-surface installation of design coverings on stair treads. The matching profiles protect the edges of the covering..Technical dataAluminium profile, black powder-coated.Dimension 45 x 10 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 2,5 mmrecessed screw holes
Content: 2.5 M (€8.76 / 1 M)
profiles in aluminium with sub-profile to screw in place, in long-life professional quality ideally suited to renovation or modernisation of staircases and landings.
Content: 2.5 M (€9.58 / 1 M)
Stair nosing profile 39 x 25 mm - blackStair nosing profile for design coverings up to 2 mm, for the full-surface laying of design coverings on steps. The matching profiles protect the edges of the base.SpecificationsAluminium profile, matt stainless steel Dimensions 39 x 25 x 2,500 mm for design coverings / LVT, resilient floor coverings up to 2 mm countersunk screw holes 15 screws and dowels are required for installation, these are not included in delivery
Content: 2.5 M (€11.58 / 1 M)
Stair nosing profile 39 x 25 mm - matt stainless steelStair nosing profile for design coverings up to 2 mm, for the full-surface laying of design coverings on steps. The matching profiles protect the edges of the base.SpecificationsAluminium profile, matt stainless steel Dimensions 39 x 25 x 2,500 mm for design coverings / LVT, resilient floor coverings up to 2 mm countersunk screw holes15 screws and dowels are required for installation, these are not included in delivery
Content: 2.5 M (€9.00 / 1 M)
Stair nosing profile 45 x 10 mm - high-grade steel matt.Stair nosing profile for design coverings up to 2,5 mm, for the full-surface installation of design coverings on stair treads. The matching profiles protect the edges of the covering..Technical dataAluminium profile, high-grade steel matt.Dimension 45 x 10 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 2,5 mmrecessed screw holes
Content: 2.5 M (€8.36 / 1 M)
LED stair nosing profile 219 - Set accents with LED technology Revolutionize the world of living with LED technology. With this inexpensive and long-lasting technology, light can be used in almost any area - whether for design reasons or safety aspects b>. The LED stair nosing 219 was specially developed for dryback coverings with a thickness of up to 3 mm . The covering is glued into the profile on the step so that only the 2 mm narrow stop edge can be seen from above. The LED stair nosing 219 can be processed on profiled, undercut steps as well as on block steps . The stair nosing profile 219 has an LED channel that emits light downwards. The step below is optimally illuminated. This is not only for safety, but also creates a cozy atmosphere. The LED channel can be equipped with commercially available, self-adhesive LED strips up to 10 mm wide. Note : These are not included in the scope of delivery. Details at a glance: LED stair nosing No. 219, silvermaterial: aluminumFor covering thicknesses up to 3mmcountersunk screw holeslight emission downwardsLED diffuser available separately: "04030723-00"Dimensions: 59 x 51 x 2,500 mm Area of #x200B;#x200B;application: The LED stair nosing profile 219 is preferably used when the step and riser is to be provided with a up to 3mm thick floor covering . The profile was provided with a 3mm high recess especially for this purpose on the step surface and below the LED channel. The floor covering can now be laid down to the edge of the step and under the LED channel. There remains frontal only an approx. 17.8mm thick aluminum edge visible. Assembly: The profile is screwed onto the step edges mentioned above using suitable dowels and countersunk screws to fit precisely onto the existing steps above the laid floor covering. Make sure that there is some space for possible cables for the LED lighting . A translucent flap that is clipped on is available as an option to close the LED channel. It is not absolutely necessary to use it. The LED diffuser can be ordered separately.
Content: 2.5 M (€19.58 / 1 M)
Stair nosings 40 x 25 mm in matt stainless steel - reliable edge protection.Prinz stair nosing profiles reliably protect the edges of the floor covering on the step edge. The grooved surface increases safety on the step edge.Stair nosing profile WxH 40 x 25 mm.Material: Aluminium, EN AW 6063.Machining: Sunk drilled.Mounting type: Screw fixing.Application:The stair nosing profile is used at the ends of stairs, on steps or landings. It is suitable for resilient floor coverings, textile floor coverings, laminate/multilayer, etc. ...Mounting: Screw fixing - suitable screws and dowels are included in the scope of delivery.
stair profile with rubber insert grey 1250 mm, stair nosing profile 25 x 9 mmThis stair profile with a rubber insert is designed to finish stair edges. The insert is part of the profile design. Aluminium is lightweight and dimensionally stable, making it suitable for a wide range of trim applications.Benefits and featuresProfile with rubber insert for stair edgesFor finishing stair stepsProduct detailsMaterial: aluminiumProfile type: stair nosing profileProfile height: 9 mmLength: 1250 mmColour / finish: greyApplicationSuitable for appropriate stair steps and installation conditions. Check dimensions and fitting requirements before installation.
Content: 1.25 M (€9.56 / 1 M)
LED stair nosing profile 218 - Set accents with LED technology Revolutionize the world of living with LED technology. With this inexpensive and long-lasting technology, light can be used in almost any area - whether for design reasons or safety aspects b>. The stair nosing profile 218 has an LED channel that emits light downwards. The step below is optimally illuminated. This is not only for safety, but also creates a cozy atmosphere. The LED channel can be fitted with commercially available, self-adhesive LED strips B>can be equipped up to a width of 10 mm. Note: These are not included in the scope of delivery. Details at a glance: LED stair nosing No. 218, blackmaterial: aluminumcountersunk screw holeslight emission downwardsLED diffuser available separately: "04030723-00"Dimensions: 56 x 16 x 2,500 mm Area of #x200B;#x200B;application: The LED stair nosing profile 218 is preferably used when the step and riser has already been provided with a floor covering. The thickness of the flooring does not matter. The profile is therefore ideally suited for renovating existing steps. In addition, thanks to its stable construction , the profile enables the tread surfaces to be extended by up to 17 mm. < / P>Assembly: The profile is screwed onto the step edges mentioned above using suitable dowels and countersunk screws precisely on the existing steps above the laid floor covering. Make sure that there is some space for possible cables for the LED lighting . A translucent flap that is clipped on is available as an option to close the LED channel. It is not absolutely necessary to use it. The LED diffuser can be ordered separately.
Content: 2.5 M (€25.18 / 1 M)
profiles in aluminium with sub-profile to screw in place, in long-life professional quality ideally suited to renovation or modernisation of staircases and landings.
Stair nosing profile 30 x 20 mm silver 2,50 m - Reliable edge protection The stair nosing profile 30 x 20 mm reliably protects the edges of the floor covering on a step edge. The grooved surface also increases safety on the step edge. Stair nosing profile (W x H) 30 x 20 mmquick and safe assemblyaluminumSecurity through corrugationCountersunk screw holes Application: The stair nosing profile is used at the end of the stairs, on steps or landings. It is suitable for elastic floor coverings, textile floor coverings, laminate / multilayer, etc. ... Assembly: screw fastening - suitable screws and dowels are included in the scope of delivery.
Content: 2.5 M (€6.78 / 1 M)
profiles in aluminium with sub-profile to screw in place, in long-life professional quality ideally suited to renovation or modernisation of staircases and landings.
Content: 2.5 M (€27.96 / 1 M)
Stair nosing profile 30 x 20 mm, matt stainless steel 2,50 m - Reliable edge protection The stair nosing profile 30 x 20 mm reliably protects the edges of the floor covering on a step edge. The grooved surface also increases safety on the step edge. Stair nosing profile (W x H) 30 x 20 mmquick and safe assemblyaluminumSecurity through corrugationCountersunk screw holes Application: The stair nosing profile is used at the end of the stairs, on steps or landings. It is suitable for elastic floor coverings, textile floor coverings, laminate / multilayer, etc. ... Assembly: screw fastening - suitable screws and dowels are included in the scope of delivery.
Content: 2.5 M (€7.58 / 1 M)
profiles in aluminium with sub-profile to screw in place, in long-life professional quality ideally suited to renovation or modernisation of staircases and landings.
Stair nosing inner angle 25 x 25 mm - silverStair nosings for design coverings up to 3 mm, for the full-surface laying of design coverings on steps. The matching inner angles also protect the edges of the covering in the inner corner between the step and riser.SpecificationsAluminium profile, silverDimensions 25 x 25 x 2,500 mmfor design coverings / LVT, resilient floor coverings from 2 to 3 mmcountersunk screw holes15 screws and dowels are required for installation, these are not included in delivery
Content: 2.5 M (€7.18 / 1 M)
profiles in aluminium with sub-profile to screw in place, in long-life professional quality ideally suited to renovation or modernisation of staircases and landings.
Content: 2.5 M (€27.00 / 1 M)
Stair nosing profile no. 271 - silverStair nosing profile for design floor coverings of 2-3 mm, with insert for a clean and attractive trim of any edges such as stairs, landings or protrusions.Strips with a width of 38.5-40 mm are cut from the design flooring and subsequently inserted into the profile slot.Technical dataAluminum profile, silverDimensions 13.7 x 44.6 x 3,000 mmInsertion for 28.5-40 mm wide stripsfor design floor coverings / LVT, elastic floor coverings from 2-3 mmrecessed screw holes
Content: 3 M (€11.30 / 1 M)
Stair nosing profile NOVA 70 x 44 mm silver 2.50 m - Reliable edge protection The stair nosing profile NOVA 70 x 44 mm reliably protects the edges of the floor covering on a step edge. The grooved surface also increases safety on the step edge. Stair nosing profile (W x H) 70 x 44 mm quick and safe assembly aluminum Security through corrugation Countersunk screw holes Application: The stair nosing profile is used at the end of the stairs, on steps or landings. It is suitable for elastic floor coverings, textile floor coverings, laminate / multilayer, etc. ... Assembly: screw fastening - suitable screws and dowels are not included in the scope of delivery. You can find a suitable fastening set in our accessories.
Content: 2.5 M (€21.00 / 1 M)
LED stair nosing profile 219 - Set accents with LED technology Revolutionize the world of living with LED technology. With this inexpensive and long-lasting technology, light can be used in almost any area - whether for design reasons or safety aspects b>. The LED stair nosing 219 was specially developed for dryback coverings with a thickness of up to 3 mm . The covering is glued into the profile on the step so that only the 2 mm narrow stop edge can be seen from above. The LED stair nosing 219 can be processed on profiled, undercut steps as well as on block steps . The stair nosing profile 219 has an LED channel that emits light downwards. The step below is optimally illuminated. This is not only for safety, but also creates a cozy atmosphere. The LED channel can be equipped with commercially available, self-adhesive LED strips up to 10 mm wide. Note : These are not included in the scope of delivery. Details at a glance: LED stair nosing No. 219, Black powder-coatedmaterial: aluminumFor covering thicknesses up to 3mmcountersunk screw holeslight emission downwardsLED diffuser available separately: "04030723-00"Dimensions: 59 x 51 x 2,500 mm Area of #x200B;#x200B;application: The LED stair nosing profile 219 is preferably used when the step and riser is to be provided with a up to 3mm thick floor covering . The profile was provided with a 3mm high recess especially for this purpose on the step surface and below the LED channel. The floor covering can now be laid down to the edge of the step and under the LED channel. There remains frontal only an approx. 17.8mm thick aluminum edge visible. Assembly: The profile is screwed onto the step edges mentioned above using suitable dowels and countersunk screws to fit precisely onto the existing steps above the laid floor covering. Make sure that there is some space for possible cables for the LED lighting . A translucent flap that is clipped on is available as an option to close the LED channel. It is not absolutely necessary to use it. The LED diffuser can be ordered separately.
Content: 2.5 M (€26.38 / 1 M)
LED stair nosing profile 218 - Set accents with LED technology Revolutionize the world of living with LED technology. With this inexpensive and long-lasting technology, light can be used in almost any area - whether for design reasons or safety aspects b>. The stair nosing profile 218 has an LED channel that emits light downwards. The step below is optimally illuminated. This is not only for safety, but also creates a cozy atmosphere. The LED channel can be fitted with commercially available, self-adhesive LED strips B>can be equipped up to a width of 10 mm. Note: These are not included in the scope of delivery. Details at a glance: LED stair nosing No. 218, matt stainless steelmaterial: aluminumcountersunk screw holeslight emission downwardsLED diffuser available separately: "04030723-00"Dimensions: 56 x 16 x 2,500 mm Area of #x200B;#x200B;application: The LED stair nosing profile 218 is preferably used when the step and riser has already been provided with a floor covering. The thickness of the flooring does not matter. The profile is therefore ideally suited for renovating existing steps. In addition, thanks to its stable construction , the profile enables the tread surfaces to be extended by up to 17 mm. < / P>Assembly: The profile is screwed onto the step edges mentioned above using suitable dowels and countersunk screws precisely on the existing steps above the laid floor covering. Make sure that there is some space for possible cables for the LED lighting . A translucent flap that is clipped on is available as an option to close the LED channel. It is not absolutely necessary to use it. The LED diffuser can be ordered separately.
Content: 2.5 M (€20.38 / 1 M)
Stair nosing profile 30 x 20 mm silver 1.00 m - Reliable edge protection The stair nosing profile 30 x 20 mm reliably protects the edges of the floor covering on a step edge. The grooved surface also increases safety on the step edge. Stair nosing profile (W x H) 30 x 20 mmquick and safe assemblyaluminumSecurity through corrugationCountersunk screw holes Application: The stair nosing profile is used at the end of the stairs, on steps or landings. It is suitable for elastic floor coverings, textile floor coverings, laminate / multilayer, etc. ... Assembly: screw fastening - suitable screws and dowels are included in the scope of delivery.
Prinz Stair Nosing Profile 41,2 x 27,2 mm - No. 289 - Silver - 250 cmAluminium Stair edge with insert - drilled. For floor covering thicknesses 3,0 mm.Stair Nosing ProfileThe stair nosing profile reliably protects heavily used stair edges from wear and damage. It also creates a clean finish and improves the visual recognition of the step.Profile SystemUniversal profiles are the flexible solution for numerous applications around floor coverings. Depending on the design, they are suitable for transitions, finishes or edge protection and provide a clean, professional appearance. High-quality materials and durable workmanship ensure reliable use in residential and commercial areas.Material & QualityThe aluminium profile impresses with its low weight, high stability and excellent corrosion resistance. It is durable, easy to care for and ideally suited for floor finishes in residential and commercial areas.Quality by Prinz ProfilePrinz Profile has stood for quality, precision and innovative interior fitting solutions for decades. High-quality materials, careful workmanship and well-designed profile systems ensure durable and reliable floor finishes. Whether for renovation or new construction, Prinz offers the right solution for almost every installation situation in residential and commercial areas.
Content: 2.5 M (€9.08 / 1 M)
Stair nosing profile no. 271 - black powder-coatedStair nosing profile for design flooring of 2-3mm, with insertion for a clean and beautiful visual trim of any edges such as of stairs, landings or ledges.Strips with a width of 38.5-40 mm are cut from the design floor and subsequently inserted into the insertion of the profile..Technical dataAluminium profile, black powder-coatedDimension 13.7 x 44.6 x 3,000 mmInsertion for 28.5-40mm wide stripsfor design coverings / LVT, resilient floor coverings from 2-3 mmrecessed screw holes
Content: 3 M (€13.30 / 1 M)
DesignStep stair nosings - finer - more elegant - more practicalThe two-part DesignStep stair nosing system impresses with its innovative clip technology paired with purist design.The discreet top profile in stainless steel matt gives the stair nosing an elegant and modern look, without visible screw holes. At the heart of the stair nosing system is the massive, wide base profile, which guarantees high load-bearing capacities. Technical dataAluminum profile, L = 100 cm for covering thicknesses from 4 to 6.5 mm Wide base profile, for high loads Design top profile 18.5 x 18.5 mm Easy installation, thanks to clip system suitable for LVT / design or vinyl flooringInstallationInstallation is safe, simple and user-friendly. Screw the base profile to the floor using the fixing material supplied. Then lay the floor covering on the step and click the top profile into the base profile.AccessoriesThe appropriate fixing materials, such as screws and dowels, are included in the scope of delivery.Scope of delivery: Aluminum top profile, aluminum base profile, fastening material
LED stair nosing profile 219 - Set accents with LED technology Revolutionize the world of living with LED technology. With this inexpensive and long-lasting technology, light can be used in almost any area - whether for design reasons or safety aspects b>. The LED stair nosing 219 was specially developed for dryback coverings with a thickness of up to 3 mm . The covering is glued into the profile on the step so that only the 2 mm narrow stop edge can be seen from above. The LED stair nosing 219 can be processed on profiled, undercut steps as well as on block steps . The stair nosing profile 219 has an LED channel that emits light downwards. The step below is optimally illuminated. This is not only for safety, but also creates a cozy atmosphere. The LED channel can be equipped with commercially available, self-adhesive LED strips up to 10 mm wide. Note : These are not included in the scope of delivery. Details at a glance: LED stair nosing No. 219, matt stainless steelmaterial: aluminumFor covering thicknesses up to 3mmcountersunk screw holeslight emission downwardsLED diffuser available separately: "04030723-00"Dimensions: 59 x 51 x 2,500 mm Area of #x200B;#x200B;application: The LED stair nosing profile 219 is preferably used when the step and riser is to be provided with a up to 3mm thick floor covering . The profile was provided with a 3mm high recess especially for this purpose on the step surface and below the LED channel. The floor covering can now be laid down to the edge of the step and under the LED channel. There remains frontal only an approx. 17.8mm thick aluminum edge visible. Assembly: The profile is screwed onto the step edges mentioned above using suitable dowels and countersunk screws to fit precisely onto the existing steps above the laid floor covering. Make sure that there is some space for possible cables for the LED lighting . A translucent flap that is clipped on is available as an option to close the LED channel. It is not absolutely necessary to use it. The LED diffuser can be ordered separately.
Content: 2.5 M (€22.38 / 1 M)
Stair nosing profile no. 271 - matt stainless steelStair nosing profile for design floor coverings of 2-3 mm, with insert for a clean and attractive trim of any edges such as stairs, landings or protrusions.Strips with a width of 38.5-40 mm are cut from the design flooring and subsequently inserted into the slide-in section of the profile.Technical dataAluminum profile, matt stainless steelDimensions 13.7 x 44.6 x 3,000 mmInsertion for 28.5-40 mm wide stripsfor design floor coverings / LVT, elastic floor coverings from 2-3 mmrecessed screw holes
Content: 3 M (€12.17 / 1 M)
Aluminum stair nosings - a safe and stylish solution for any staircase
Our high-quality aluminum stair edging profiles offer a durable and elegant solution for protecting your stair treads. Developed especially for indoor use, they combine functionality with an attractive design and ensure greater safety on your stairs. The profiles are available in different lengths from 90 cm to 5 m and can thus be ideally adapted to your individual needs.
Versatile color and design options
The stair edging profiles are available in several colors and decors, allowing them to be seamlessly integrated into a wide variety of interior styles. Whether you prefer a discreet look or want to set a highlight, our selection offers the right profile for every taste. Thanks to the high-quality coating, the colors remain appealing and durable even with heavy use.
Flexible installation - glue or screws
We offer you flexible mounting options for installing the aluminum stair edging profiles: the profiles can either be glued or screwed on, depending on the surface and your needs. This gives you the freedom to choose the installation method that best suits your project. Thanks to their robust materials and construction, the profiles provide a secure hold and protect your stair treads from wear and damage.
Optimum protection and safety
Our aluminum stair edging profiles are not only a visual highlight, but also provide functional protection for your stairs. The non-slip surface and durable material quality make them the ideal choice for heavily used stair treads in the living area. Thanks to the hard-wearing aluminum coating, they are protected against wear and impact, which significantly increases the longevity of your stairs.
Stair edging profiles from leiste24.de - your advantages at a glance
- High-quality aluminum for long durability and stability
- Various lengths from 90 cm to 5 m for individual adaptation
- Diverse colors and decors for every interior design style
- Easy installation by gluing or screwing
- Safe and long-lasting protection for your stair treads
Discover our range of stair edging profiles now and give your stairs the perfect protection and a noble look. At leiste24.de you will find exactly the stair edging profile that suits your requirements and style.