Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 0.9 M (€17.22 / 1 M)
Prinz transition profile 90 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, easy disassembly and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIncludes base profile, grey. The aluminium clip profile system is designed for covering thicknesses of 7 to 15 mm. With the raise profile "Beige" even covering thicknesses up to 17.5 mm can be achieved. Concealed fastened, these profiles offer a perfect look without screw holes.Technical data at a glance:Transition profile - black anodised L= 90 cmMaterial: aluminiumFor floor covering thicknesses 7 - 15 mm (up to 17.5 mm with raising profile)Height compensation up to 6 mm Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile fits tightly on both sides.At the same time, the curved toothing allows problem-free dismantling.The top profile can be detached if necessary and then anchored back into the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.
Content: 0.9 M (€19.89 / 1 M)
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 0.9 M (€15.44 / 1 M)
ECO-CLIP transition profile 90 cm in matt stainless steel - powerful and easy processing! ECO-CLIP is a new profile system for the floating installation of floor coverings . ECO-CLIP profiles correspond to the new design line without decorative grooves and in a flat design . Fantastic look thanks to concealed fastening Automatic adjustment in height and inclination Simple, quick and safe installation Upper profile can be easily dismantled at any time The ECO-CLIP profile system is designed for covering thicknesses of 6 to 12 mm . Thanks to the practical clip system, this transition profile can be installed quickly and easily . In addition, it offers a perfect, modern look without screw holes, if sufficient Space for expansion joints. Technical data at a glance: Transition profile - matt stainless steel Dimensions 30 x 900 mm For covering thicknesses 6 - 12 mm Height compensation up to 4 mm Cover profile made of aluminum Lower profile made of impact-resistant plastic Assembly: Installation is particularly quick and easy. The base profile made of impact-resistant plastic is glued to the substrate. For gluing the lower profile, we recommend assembly adhesive, you can find this in our accessories. After laying the floor covering, e.g. laminate, the top profile is locked into the base profile. The groove of the base profile is trapezoidal so that the web of the upper profile can be tilted easily. The upper profiles can thus automatically adapt to the floor covering - variable in height and incline. At the same time, the toothing allows easy dismantling.
Content: 0.9 M (€15.00 / 1 M)
Aluminium. For covering thicknesses 7-15 mm. Flat design without grooves. Height compensation up to 6 mm. Including base section, grey.
Content: 0.9 M (€20.56 / 1 M)
Aluminum profiles with sub-profile for screwing in a very durable professional quality to compensate height differences of 13 mm to 0 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 0.9 M (€18.78 / 1 M)
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 2.7 M (€15.74 / 1 M)
Aluminum profiles with sub-profile for screwing in a very durable professional quality to compensate height differences of 13 mm to 0 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 0.9 M (€17.22 / 1 M)
Aluminium. For covering thicknesses 7-15 mm. Flat design without grooves. Height compensation up to 6 mm. Including base section, grey.
Aluminum profiles with sub-profile for screwing in a very durable professional quality as an ideal wall connection.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm.
Content: 0.9 M (€17.56 / 1 M)
Aluminum profiles with sub-profile for screwing in a very durable professional quality as an ideal wall connection.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm.
Content: 2.7 M (€14.26 / 1 M)
Aluminum profiles with sub-profile for screwing in a very durable professional quality as an ideal wall connection.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm.
Content: 0.9 M (€15.22 / 1 M)
Prinz Adjustable Profile 90 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, problem-free disassembly and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIncludes base profile, grey. The aluminium clip profile system is designed for covering thicknesses of 7 to 17.5 mm. Concealed mounted, these profiles offer a perfect appearance without screw holes..Technical data at a glance:Adaptor profile - black anodised L = 90cm.Material: aluminiumfor covering thicknesses 7 - 17.5 mmHeight compensation from 17.5 mm down to 0 mm .Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile fits tightly on both sides.At the same time, the curved toothing allows problem-free dismantling.The top profile can be detached if necessary and then anchored back into the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.
Content: 0.9 M (€23.22 / 1 M)
Aluminum profiles with sub-profile for screwing in a very durable professional quality as an ideal wall connection.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm.
Content: 2.7 M (€15.52 / 1 M)
Aluminum profiles with sub-profile for screwing in a very durable professional quality as an ideal wall connection.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm.
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Aluminium. For covering thicknesses 7-17,5 mm. Flat design without grooves. Height compensation from 17,5 mm to 0 mm. Including base section, grey.
Content: 0.9 M (€22.11 / 1 M)
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 2.7 M (€14.63 / 1 M)
ECO-CLIP transition profile 2.70 m in matt stainless steel - powerful and simple processing! ECO-CLIP is a new profile system for the floating installation of floor coverings . ECO-CLIP profiles correspond to the new design line without decorative grooves and in a flat design . Fantastic look thanks to concealed fastening Automatic adjustment in height and inclination Simple, quick and safe installation Upper profile can be easily dismantled at any time The ECO-CLIP profile system is designed for covering thicknesses of 6 to 12 mm . Thanks to the practical clip system, this transition profile can be installed quickly and easily . In addition, it offers a perfect, modern look without screw holes, if sufficient Space for expansion joints. Technical data at a glance: Transition profile - matt stainless steel Dimensions 30 x 2,700 mm For covering thicknesses 6 - 12 mm Height compensation up to 4 mm Cover profile made of aluminum Lower profile made of impact-resistant plastic Assembly: Installation is particularly quick and easy. The base profile made of impact-resistant plastic is glued to the substrate. For gluing the lower profile, we recommend assembly adhesive, you can find this in our accessories. After laying the floor covering, e.g. laminate, the top profile is locked into the base profile. The groove of the base profile is trapezoidal so that the web of the upper profile can be tilted easily. The upper profiles can thus automatically adapt to the floor covering - variable in height and incline. At the same time, the toothing allows easy dismantling.
Content: 2.7 M (€14.26 / 1 M)
ECO-CLIP transition profile 90 cm in silver - powerful and easy processing! ECO-CLIP is a new profile system for the floating installation of floor coverings . ECO-CLIP profiles correspond to the new design line without decorative grooves and in a flat design . Fantastic look thanks to concealed fastening Automatic adjustment in height and inclination Simple, quick and safe installation Upper profile can be easily dismantled at any time The ECO-CLIP profile system is designed for covering thicknesses of 6 to 12 mm . Thanks to the practical clip system, this transition profile can be installed quickly and easily . In addition, it offers a perfect, modern look without screw holes, if sufficient Space for expansion joints. Technical data at a glance: Transition profile - silver Dimensions 30 x 900 mm For covering thicknesses 6 - 12 mm Height compensation up to 4 mm Cover profile made of aluminum Lower profile made of impact-resistant plastic Assembly: Installation is particularly quick and easy. The base profile made of impact-resistant plastic is glued to the substrate. For gluing the lower profile, we recommend assembly adhesive, you can find this in our accessories. After laying the floor covering, e.g. laminate, the top profile is locked into the base profile. The groove of the base profile is trapezoidal so that the web of the upper profile can be tilted easily. The upper profiles can thus automatically adapt to the floor covering - variable in height and incline. At the same time, the toothing allows easy dismantling.
Content: 0.9 M (€13.89 / 1 M)
Prinz transition profile 270 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, problem-free disassembly and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIncludes base profile, grey. The aluminium clip profile system is designed for covering thicknesses of 7 to 15 mm. With the raise profile "Beige" even covering thicknesses up to 17.5 mm can be achieved. Concealed fastened, these profiles offer a perfect look without screw holes.Technical data at a glance:Transition profile - black anodised L= 270 cmMaterial: aluminiumFor floor covering thicknesses 7 - 15 mm (up to 17.5 mm with raising profile)Height compensation up to 6 mm .Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile fits tightly on both sides.At the same time, the curved toothing allows problem-free dismantling.The top profile can be detached if necessary and then anchored back into the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.
Content: 2.7 M (€20.93 / 1 M)
Aluminum profiles with sub-profile for screwing in a very durable professional quality to compensate height differences of 13 mm to 0 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Prinz end profile 270 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, problem-free removal and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIdeal for wall connections and the finish on balcony doors.The aluminium clip profile system is designed for covering thicknesses of 8 to 14 mm. With the raised profile "Beige" even covering thicknesses up to 17.5 mm can be achieved. Concealed fastened, these profiles offer a perfect look without screw holes.Technical data at a glanceFinish profile - black anodised L = 270 cmMaterial: aluminiumFor floor covering thicknesses 8 - 14 mm (up to 17.5 mm with raising profile)Includes base profile, grey.Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile lies tightly on both sides.At the same time, the curved toothing allows problem-free disassembly. If necessary, the top profile can be detached and then re-anchored to the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.
Content: 2.7 M (€19.22 / 1 M)
Aluminium. For covering thicknesses 7-15 mm. Flat design without grooves. Height compensation up to 6 mm. Including base section, grey.
Content: 2.7 M (€20.93 / 1 M)
Profi-Tec transition profile 90 cm - Powerful and easy processing.Elegant design, high frictional connection, problem-free disassembly and maximum load-bearing capacity - these are the strengths of the clip profile system. automatic adjustment in height and inclination. Simple, quick and safe assembly. Includes base profile. The aluminium clip profile system is designed for Plank thicknesses from 6 to 11 mm. Concealed mounted, these profiles offer a perfect look without screw holes. Technical data at a glance: Transition profile - silver L = 90 cm Material: aluminium for covering thicknesses 6 - 11mm Height compensation up to 3mm Assembly:The assembly is especially quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering -. variable in height and inclination. Even with strong differences in level, the profile lies close on both sides. At the same time, the curved toothing allows the Easily dismantled.The top profile can be detached if necessary and then re-anchored to the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for dynamic load of 1,100 N over 80,000 load cycles and a static load of up to 4,000 N.
Content: 0.9 M (€13.89 / 1 M)
Aluminium. For covering thicknesses 7-15 mm. Height compensation up to 6 mm. Including base section, grey.
Content: 0.9 M (€18.78 / 1 M)
Aluminum profiles with sub-profile for screwing in a very durable professional quality to compensate height differences of 13 mm to 0 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 2.7 M (€18.48 / 1 M)
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Aluminum profiles with sub-profile for screwing in a very durable professional quality to compensate height differences of 13 mm to 0 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Prinz end profile 90 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, problem-free removal and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIdeal for wall connections and the finish on balcony doors.The aluminium clip profile system is designed for covering thicknesses of 8 to 14 mm. With the raised profile "Beige" even covering thicknesses up to 17.5 mm can be achieved. Concealed fastened, these profiles offer a perfect look without screw holes.Technical data at a glanceFinal profile - black anodised L = 90 cmMaterial: aluminiumFor covering thicknesses 8 - 14 mm (up to 17.5 mm with raising profile)Includes base profile, grey.Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile lies tightly on both sides.At the same time, the curved toothing allows problem-free disassembly. If necessary, the top profile can be detached and then re-anchored to the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.
Content: 0.9 M (€19.89 / 1 M)
Profi-Tec transition profile 1m - Powerful and simple processing.Elegant design, high frictional connection, problem-free disassembly and maximum load-bearing capacity - these are the strengths of the clip profile system. automatic adjustment in height and inclination. Simple, quick and safe assembly. Includes base profile. The aluminium clip profile system is designed for Plank thicknesses from 6 to 11 mm. Concealed mounted, these profiles offer a perfect look without screw holes. Technical data at a glance: Transition profile - silver L = 100 cm Material: aluminium for covering thicknesses 6 - 11mm Height compensation up to 3mm Assembly:The assembly is especially quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering -. variable in height and inclination. Even with strong differences in level, the profile lies close on both sides. At the same time, the curved toothing allows the Easily dismantled.The top profile can be detached if necessary and then re-anchored to the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for dynamic load of 1,100 N over 80,000 load cycles and a static load of up to 4,000 N.
Aluminum profiles with sub-profile for screwing in a very durable professional quality as an ideal wall connection.Floor cover height: 7 -16 mm.
Content: 2.7 M (€13.67 / 1 M)
Aluminum profiles with sub-profile for screwing in a very durable professional quality to compensate height differences of 13 mm to 0 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 2.7 M (€16.63 / 1 M)
Aluminium. For covering thicknesses 8-14 mm. Flat design without grooves. Ideal for wall connections and the joints within balcony doors. Including base section, grey.
Content: 2.7 M (€19.44 / 1 M)
ECO-CLIP adjustment profile 90 cm in matt stainless steel - powerful and easy processing! ECO-CLIP is a new profile system for the floating installation of floor coverings . ECO-CLIP profiles correspond to the new design line without decorative grooves and in a flat design . Fantastic look thanks to concealed fastening Automatic adjustment in height and inclination Simple, quick and safe installation Upper profile can be easily dismantled at any time The ECO-CLIP profile system is designed for covering thicknesses of 6 to 12 mm . The adjustment profile can compensate for a height difference of up to 12 mm . Thanks to the practical clip system, this adjustment profile can be installed quickly and easily . In addition, it offers a perfect, modern look without screw holes, if sufficient Space for expansion joints. Technical data at a glance: Adjustment profile - matt stainless steel Dimensions 37 x 900 mm For covering thicknesses 6 - 12 mm Height adjustment from 12 mm to 0 mm Cover profile made of aluminum Lower profile made of impact-resistant plastic Assembly: Installation is particularly quick and easy. The base profile made of impact-resistant plastic is glued to the substrate. We recommend assembly adhesive for gluing the lower profile. After laying the floor covering, e.g. laminate, the top profile is locked into the base profile. The groove of the base profile is trapezoidal so that the web of the upper profile can be tilted easily. The upper profiles can thus automatically adapt to the floor covering - variable in height and incline. At the same time, the toothing allows easy dismantling.
Content: 0.9 M (€16.56 / 1 M)
ECO-CLIP end profile 90 cm in matt stainless steel - powerful and easy processing! ECO-CLIP is a new profile system for the floating installation of floor coverings . ECO-CLIP profiles correspond to the new design line without decorative grooves and in a flat design . Fantastic look thanks to concealed fastening Automatic adjustment in height and inclination Simple, quick and safe installation Upper profile can be easily dismantled at any time The ECO-CLIP profile system is designed for covering thicknesses of 6 to 12 mm . Thanks to the practical clip system, this end profile can be installed quickly and easily . It is ideally suited for wall connections or a closure on a balcony door. In addition, it offers a perfect, modern look without screw holes, if sufficient Space for expansion joints. Technical data at a glance: End profile - matt stainless steel Dimensions 20 x 900 mm For covering thicknesses 6 - 12 mm Cover profile made of aluminum Lower profile made of impact-resistant plastic Assembly: Installation is particularly quick and easy. The base profile made of impact-resistant plastic is glued to the substrate. We recommend assembly adhesive for gluing the lower profile. After laying the floor covering, e.g. laminate, the top profile is locked into the base profile. The groove of the base profile is trapezoidal so that the web of the upper profile can be tilted easily. The upper profiles can thus automatically adapt to the floor covering - variable in height and incline. At the same time, the toothing allows easy dismantling.
Content: 0.9 M (€14.33 / 1 M)
Aluminum profiles with sub-profile for screwing in a very durable professional quality as an ideal wall connection.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm.
Universal transition profile 50mm made of aluminum in silverThe wide transition also offers the possibility of height compensation up to max. 16mm.. Fastening is via the guide rail on the back of the profile. Concealed fastening gives this profile a perfect look, without screw holes.Mounting: Screw fastening (screws and dowels are included in the set)
Content: 0.93 M (€9.67 / 1 M)
Prinz Adjustable Profile 270 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, problem-free disassembly and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIncludes base profile, grey. The aluminium clip profile system is designed for covering thicknesses of 7 to 17.5 mm. Concealed mounted, these profiles offer a perfect appearance without screw holes..Technical data at a glance:Adaptor profile - black anodised L = 270cm.Material: aluminiumfor covering thicknesses 7 - 17.5 mmHeight adjustment from 17.5 mm down to 0 mm .Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile fits tightly on both sides.At the same time, the curved toothing allows problem-free dismantling.The top profile can be detached if necessary and then anchored back into the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.
Content: 2.7 M (€23.89 / 1 M)
Aluminium. For covering thicknesses 8-14 mm. Flat design without grooves. Ideal for wall connections and the joints within balcony doors. Including base section, grey.
Content: 0.9 M (€19.89 / 1 M)
Universal transition profile 50 mm made of aluminum in silverThe wide transition also offers the possibility of height compensation up to max. 16mm.. Fastening is via the guide rail on the back of the profile. Concealed fastening gives this profile a perfect look, without screw holes.Mounting: Screw fastening (screws and dowels are included in the set)
Content: 1.8 M (€8.97 / 1 M)
Aluminum profiles with sub-profile for screwing in a very durable professional quality as an ideal wall connection.
Content: 0.9 M (€14.33 / 1 M)
ECO-CLIP end profile 2.70 m in matt stainless steel - powerful and easy processing! ECO-CLIP is a new profile system for the floating installation of floor coverings . ECO-CLIP profiles correspond to the new design line without decorative grooves and in a flat design . Fantastic look thanks to concealed fastening Automatic adjustment in height and inclination Simple, quick and safe installation Upper profile can be easily dismantled at any time The ECO-CLIP profile system is designed for covering thicknesses of 6 to 12 mm . Thanks to the practical clip system, this end profile can be installed quickly and easily . It is ideally suited for wall connections or a closure on a balcony door. In addition, it offers a perfect, modern look without screw holes, if sufficient Space for expansion joints. Technical data at a glance: End profile - matt stainless steel Dimensions 20 x 2,700 mm For covering thicknesses 6 - 12 mm Cover profile made of aluminum Lower profile made of impact-resistant plastic Assembly: Installation is particularly quick and easy. The base profile made of impact-resistant plastic is glued to the substrate. We recommend assembly adhesive for gluing the lower profile. After laying the floor covering, e.g. laminate, the top profile is locked into the base profile. The groove of the base profile is trapezoidal so that the web of the upper profile can be tilted easily. The upper profiles can thus automatically adapt to the floor covering - variable in height and incline. At the same time, the toothing allows easy dismantling.
Content: 2.7 M (€14.26 / 1 M)
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 3 mm.Floor cover height: 7-18 mm.
Content: 0.9 M (€22.11 / 1 M)
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 4 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm
Content: 0.9 M (€17.22 / 1 M)
ECO-CLIP adjustment profile 2.70 m in matt stainless steel - powerful and easy processing! ECO-CLIP is a new profile system for the floating installation of floor coverings . ECO-CLIP profiles correspond to the new design line without decorative grooves and in a flat design . Fantastic look thanks to concealed fastening Automatic adjustment in height and inclination Simple, quick and safe installation Upper profile can be easily dismantled at any time The ECO-CLIP profile system is designed for covering thicknesses of 6 to 12 mm . The adjustment profile can compensate for a height difference of up to 12 mm . Thanks to the practical clip system, this adjustment profile can be installed quickly and easily . In addition, it offers a perfect, modern look without screw holes, if sufficient Space for expansion joints. Technical data at a glance: Adjustment profile - matt stainless steel Dimensions 37 x 2,700 mm For covering thicknesses 6 - 12 mm Height adjustment from 12 mm to 0 mm Cover profile made of aluminum Lower profile made of impact-resistant plastic Assembly: Installation is particularly quick and easy. The base profile made of impact-resistant plastic is glued to the substrate. We recommend assembly adhesive for gluing the lower profile. After laying the floor covering, e.g. laminate, the top profile is locked into the base profile. The groove of the base profile is trapezoidal so that the web of the upper profile can be tilted easily. The upper profiles can thus automatically adapt to the floor covering - variable in height and incline. At the same time, the toothing allows easy dismantling.
Content: 2.7 M (€14.63 / 1 M)
Aluminum profiles with sub-profile and screws in a very durable professional quality for transitions of same levels or to compensate height differences of up to 3 mm.Floor cover height: 7-18 mm.
Content: 0.9 M (€25.00 / 1 M)
Aluminum profiles with sub-profile for screwing in a very durable professional quality as an ideal wall connection.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm.
Content: 0.9 M (€16.11 / 1 M)