Filter products
Skirting Board Adhesive Reliable Installation Without Nails or ScrewsOur high-quality skirting board adhesive is ideal for the easy and reliable installation of skirting boards, floor trims and decorative mouldings. This solvent-free water-based mounting adhesive offers instant grab, high final bond strength and low-odour application.Thanks to its gap-filling properties, the adhesive compensates for minor surface irregularities and provides a clean and long-lasting bond for indoor applications.Coverage per Cartridge at a GlanceSkirting boards up to 40 mm high: approx. 1520 m Skirting boards 60100 mm high: approx. 1015 m Skirting boards 100150 mm high: approx. 1012 m The stated coverage values are estimates and may vary depending on the surface and amount of adhesive applied.Benefits and FeaturesInstant grab for quick and reliable adhesion High final bond strength for long-lasting bonds Solvent-free and water-based low odour Gap-filling properties to compensate for minor surface irregularities Easy application using standard cartridge guns Applications and Suitable SurfacesThe adhesive is suitable for installing skirting boards, floor trims and decorative mouldings on concrete, masonry, plaster, wood, metal and PVC. It is also suitable for bonding polystyrene (EPS) and expanded polyurethane.Technical SpecificationsContent: 310 ml / cartridgeColour: WhiteAdhesive base: Water-based synthetic elastomer emulsionTemperature resistance: 25 °C to +70 °CCoverage: One cartridge covers approximately 1025 linear metres of skirting boards, depending on board height, adhesive application and wall condition.Application Notes and TipsThe mounting adhesive is ready to use and can be easily applied with standard cartridge guns. It offers a practical alternative to fixing with clips, nails or screws.Tip: For optimal adhesion, bonding surfaces must be firm, clean, dry and free from dust and grease. The suitability of the material combination should be checked before installation.
Panel and Trim Adhesive Strong Bonding for Panels and Skirting BoardsOur high-quality panel and trim adhesive is ideal for the easy and reliable installation of acoustic panels, wall panels, skirting boards and decorative mouldings. This solvent-free hybrid polymer mounting adhesive offers high initial tack (High Tack), permanent elasticity and low-odour application.Thanks to its strong adhesion to a wide range of materials, the adhesive provides a clean and long-lasting bond without visible screws or nails. Ideal for demanding indoor and outdoor installation work.Coverage per Cartridge at a GlanceAcoustic panels: approx. 12 panels per cartridgeSkirting boards: approx. 1020 linear metres per cartridgeThe stated coverage values are estimates and may vary depending on panel size, skirting board height, adhesive application and surface conditions.Benefits and FeaturesHigh initial tack (High Tack) of at least 150 kg/m²Permanently elastic for durable and flexible bondsSolvent-, isocyanate- and phthalate-free low odourUV- and weather-resistant suitable for indoor and outdoor useCan also be applied to slightly damp surfacesVery easy to apply using standard cartridge gunsPaintable after curing with suitable paintsNon-corrosive when bonding metalsApplications and Suitable SurfacesThe mounting adhesive is suitable for installing wall panels, wood, MDF, OSB and chipboard panels, as well as skirting boards, floor trims and decorative mouldings.It bonds to a wide range of suitable surfaces, including concrete, masonry, plaster, wood, metal, stone, glass, ceramics and compatible plastics.Technical SpecificationsContent: 290 ml / cartridgeAdhesive base: One-component hybrid polymerInitial tack: at least 150 kg/m²Skin formation time: approx. 15 minutes at 23 °C and 50% relative humidityApplication temperature: +5 °C to +40 °CTemperature resistance: ?40 °C to +90 °CApplication Notes and TipsThe mounting adhesive is ready to use and can be easily applied with standard cartridge guns. Apply the adhesive in vertical beads or dots to the prepared bonding surfaces. Position the components within 10 minutes and press firmly into place.Tip: For optimal adhesion, bonding surfaces must be firm, clean and free from dust and grease. Dry surfaces are preferred. The suitability of felt-backed acoustic panels should be checked with a test bond before installation. Not suitable for PE, PP, PA, PTFE, polyacrylate or polycarbonate.
Fixing clips for MDF skirting boards H= 40 / 60 mmFixing clips with integrated cable duct for perfect mounting of MDF core skirting boards in heights of 40 and 60 mm.Contents: 25 pieces of fixing clips incl. dowels (6x30mm) and screws (3.5x30mm) (sufficient for approx. 13 running metres of skirting board).
Content: 25 Piece (€0.28 / 1 Piece)
Fastening clips suitable for our plinth panels KS100 and KS150 The clip is simply pushed into the kitchen bar and pushed into the correct position. When the clip is in place, it is simply twisted to secure it in place. The foot of the kitchen furniture can have a diameter of up to 2.5 cm .
Fixing clips for solid wood skirtings.Skirting clips with integrated cable duct for perfect mounting of our solid wood skirtings with integrated clip milling, suitable for all heights from 40 mm to 120 mm.Contents: 25 pieces of fastening clips incl. dowels (6x30mm) and screws (3.5x30mm) (sufficient for approx. 13 running metres of skirting).
Content: 25 Piece (€0.32 / 1 Piece)
HZ clamp, pipe and skirting board holderThe HZ clamps fulfill two different functions. They hold the pipes in place and and at the same time serve to fasten the HZ skirting boards. The clamps are used to fasten pipes and fittings up to a total tings up to a total external diameter diameter of max. 22 mm.The clamp base body grips over the pipes and is installed at the same time as the pipe. pipe. For particularly uneven walls the clamp base body (hole drilled in the upper area of the in the upper area) can be fastened with an additional be fastened with an additional nail plug. Advantages:Rugged design height-adjustable slider with catch ratchet compensation for uneven floors can be combined with each other stable hold for uneven walls dimensionally stable up to 90° C flow temperature
Mounting adhesive for wooden, plastic, and metal baseboards - 310 ml cartridgeThis high-quality mounting adhesive has been specially developed for mounting baseboards made of wood, plastic, and metal. Thanks to its strong initial adhesion and fast curing, it is ideal for secure, permanent and invisible fastenings to walls and floors, both indoors and outdoors. Advantages & properties:Very high initial adhesion for fast hold Fast curing and high final strength Solvent-free and plasticizer-free - low odor and environmentally friendly Weather-resistant and light-resistant Technical data:Contents: 310 ml / cartridgeConsumption: Sufficient for up to 25 m - depending on the height of the skirting board and the condition of the wallAreas of application:The adhesive bonds reliably to wood, aluminum, iron, steel, plastics as well as fiber cement, concrete, and plaster. This makes it ideal for a wide variety of skirting board types and substrates. Note:The adhesive is easy to apply using standard cartridge guns. It offers a clever alternative to clip fastenings, especially on difficult wall surfaces. Tip: For optimum adhesion, we recommend cleaning the adhesive surfaces beforehand and keeping them dry.
Fixing clips for all MDF skirtings from 80 to 150 mm.Skirting clips with integrated cable duct for perfect mounting of MDF skirting boards, in heights from 80mm to 150 mm.Fits skirtings: Berlin profile / Weimar profile / Cologne profile / Cottbus profile.Contents: 25 pieces of fastening clips incl. dowels and screws (sufficient for approx. 13 running metres of skirting board).Berlin, Weimar, Cologne and Cottbus profile
Content: 25 Piece (€0.32 / 1 Piece)
The fastening clamps are suitable for the white plastic heating pipe cover 45 x 110 mm. It is for up to 2 tubes with a maximum diameter of 28mm. The mounting bracket is simply screwed to the wall and the strip is clicked on.
Content: 4 Piece (€1.99 / 1 Piece)
Plastic fastening clip for heating pipe cladding 90 x 40 x 2,500 mm.
Assembly adhesive especially for acoustic panels and skirting boardsVery high and fast initial adhesion, fast through-curing and high final strength. easy to press out non-foaming Water and UV resistant can be used indoors and outdoorsfor almost all substrates bonds and seals everything can be elastically loaded when cured, can be sanded and painted over very good adhesion to absorbent as well as non-absorbent substrates such as wood, metal, plastic, glass, concrete, stone, etc.Content: 290ml/cartridge Consumption: One cartridge is sufficient for at least 1-2 acoustic panels, depending on the installation location and type. When used for skirting boards, one cartridge is enough for up to 25m depending on the height of the skirting board and the nature of the substrate.
HZ clamp, pipe and skirting board holderThe HZ clamps fulfill two different functions. They fix the pipes and The clamps are used to fix pipes and fittings up to a total external diameter of max. 22 mm. of max. 22 mm.The clamp base is mounted on the wall in the plinth area. mounted on the wall. The pipes are then inserted and fixed with the locking clip. Advantages:Rugged design height-adjustable slider with detent ratchet compensation for uneven floors can be combined with each other stable hold for uneven walls dimensionally stable up to 90° C flow temperature
Mounting clips with integrated cable duct for perfect installation of our Basic Flexi-profiles.Package size: 25 pieces including dowels and screws (enough for approximately 13 linear meters).
Content: 25 Piece (€0.32 / 1 Piece)
Joint connector clamp for heating pipe claddingThe HZ clamps for fittings fulfill three different functions: They fix the pipes in place are used to fasten the HZ skirting boards and hold the HZ fitting itselfThe corner clamps adapt to installation angles of approx. 80°-135°.
Package size: Set contains 15x screws 3.0 x 25mm and dowels 5.0 x 25mm.
Content: 15 Piece (€0.13 / 1 Piece)
Acoustic felt black - 2600 x 400 mmOur black acoustic felt is the ideal addition to your acoustic panels. At around 8 mm thick, this high-quality felt not only provides optimal sound insulation but also impresses with its sustainable production from recycled plastic.Properties:Dimensions: 2600 x 400 mm Thickness: approx. 8 mm Made from certified sustainable materials with recycled plastic Fibers. Easy to work with and ideal for a variety of applications. Advantages:Improves room acoustics through excellent sound absorption Sustainable alternative environmentally friendly and durable Perfect fit for acoustic panels and wall coverings The acoustic felt is both visually appealing and functional. Its black color harmonizes with any interior design and gives a modern look.Order your black acoustic felt now and optimize the acoustics of your rooms in an environmentally friendly way.
Internal corner clamp for heating pipe claddingThe HZ clamps for molded parts fulfil three different functions: They fix the pipes are used to attach the HZ skirting boards and hold the HZ molded part itselfThe corner clamps adapt to mounting angles of approx. 80°-135°. Application range:Pipes and fittings up to a maximum outer diameter of 22 mm are held and fixed in the clamps. The laid in the base area, parallel to the floor, are fixed pipes laid parallel to the floor are covered with the HZ skirting covered with HZ skirting boards. The fixing clamps stabilize both the pipes stabilize both the pipe routing and the skirting board profile within the installation situation.
Package size: Set contains 15x screws 3.0 x 25mm and dowels 5.0 x 25mm.
Content: 15 Piece (€0.13 / 1 Piece)
Assembly adhesive Collo-Pur Turbo - the fast and strong assembly adhesivethe fastest assembly adhesive of its kind at present extremely high initial adhesion and short setting time. environmentally friendly and non-foaming weather-resistant and lightfast sandable and paintable can be used indoors and outdoors Content: 310ml/cartridge Consumption: One cartridge is sufficient for up to 25m depending on the height of the skirting and the wall condition.Range of application: Heso-Collo-Pur Turbo is ideally suited for bonding mouldings as well as for combination bonding with wood-based materials, metal, plastic, concrete, stone, brick, decorative panels, wall cladding, rigid foam insulation panels and glass when the surfaces are appropriately pretreated.
Clips for perfect installation of our metal skirtings with height 58mm.
Content: 6 Piece (€0.67 / 1 Piece)
Heso-Tack-D - Highly adhesive dispersion-based mounting adhesive (310 ml cartridge)Heso-Tack-D mounting adhesive is an extremely strong 1K adhesive based on dispersion, specially developed for the reliable mounting of skirting boards, panels, stucco profiles and other materials in interior construction. With its high initial adhesion and fast curing, this adhesive offers an ideal solution for professional and private applications - completely without solvents. Product features:1K dispersion-based assembly adhesive Very high initial adhesion for immediate hold Fast curing - ideal for quick assembly Solvent-free and odorless Paint-compatible - can be painted over after curingTechnical data:Contents: 310 ml / cartridgeConsumption: One cartridge is sufficient for up to 25 m, depending on the height of the molding and the condition of the wallPossible applications:Heso-Tack-D adhesive is ideal for assembly and repair bonding in all interior areas, e.g. for: Skirting boards, strip coverings, sign fixings Panels, stucco profiles, decorative and insulating boards Styrofoam, wood and wood-based materials Plastics such as PVC Plasterboard and mineral materials Corrosion-protected metals Application instructions:For optimum adhesion, at least one of the surfaces to be bonded should be porous or absorbent. Once fully cured, the product is odorless, physiologically harmless and neutral. Note: The product is applied using a standard cartridge gun. Suitable for all common substrates in drywall construction and interior finishing.
Premium Acrylic Sealant - 310 mlThis high-quality, 1-component, acrylate-based sealant is the perfect solution for sealing and waterproofing indoors and outdoors. Thanks to its excellent processing and adhesive properties, the acrylic sealant is ideal for demanding DIY and craft work. Properties:Suitable for indoor and outdoor use Very good processing and adhesive properties Color: Premium white Early rainproof & UV-resistant Plasto-elastic, paintable & can be painted over Emicode EC1 Plus: very low emissions Universal application:Ideal for sealing and sealing connection joints or cracks in:Window and door frames Ceilings, floors, walls, and facades Stairs, baseboards, and stucco moldings Concrete, plaster, and other building substrates Contents:310 ml / cartridge
Fastening clips for aluminum skirting boards. Suitable for: Art. 04040359-95 Art. 04040354-95 Art. 04040355-95 Art. 04040356-95 Art. 04040357-95 Art. 04040358-95 Art. 04040359-99 Art. 04004364-91 Art. 04004363-91 Art. 04004361-91 Art. 04004353-91
Fixing clips for PVC skirting board Prime-Flex 75mmBaseboard clips with integrated cable duct for perfect mounting of our Prime-Flex skirting made of plastic in the height of 75mm.Contents: 25 pieces fixing clips incl. dowels (6x30mm) and screws (3.5x30mm) (sufficient for approx. 13 running metres of skirting board).
Content: 25 Piece (€0.32 / 1 Piece)
D-Tack TACITspezial 35 mm x 50 m - double-sided adhesive tapeProfessional 2-sided adhesive tape with thread reinforcement for permanent baseboard fastening. For mounting hardcore, carpet, and chain baseboards, with strong initial adhesion and permanent adhesive strength. double-sided, extremely strong adhesive permanent, invisible baseboard fastening odorless, free of toxins approved for private/commercial use adhesive weight 450 g/m² Dimensions: 35 mm x 50 m Product description:For standard hard core/hard foam skirting boards with a wall structure of up to 1 mm and (chained) carpet skirting boards with a wall structure of up to 3 mm. Tested and recommended for textile coverings with: synthetic double backing (SDR) textile secondary backing (TR) fleece backing (PES) as well as woven fabric, needle felt, ball yarn, ball fleece.
Content: 50 M (€0.54 / 1 M)
Clips for perfect installation of our metal skirtings with height 60mm.
External corner clamp for heating pipe claddingThe HZ clamps for molded parts fulfil three different functions: They fix the pipes are used to attach the HZ skirting boards and hold the HZ molded part itselfThe corner clamps adapt to mounting angles of approx. 80°-135°. Application range:Pipes and fittings up to a maximum outer diameter of 22 mm are held and fixed in the clamps. The laid in the base area, parallel to the floor, are fixed pipes laid parallel to the floor are covered with the HZ skirting covered with HZ skirting boards. The fixing clamps stabilize both the pipes stabilize both the pipe routing and the skirting board profile within the installation situation.
Professional Mounting Kit for Skirting Boards with Clip InstallationThe Professional Mounting Kit 5 x 25 S is the ideal addition for installing our skirting boards using the clip mounting system. The set includes 50 original fischer DuoPower wall plugs (5 x 25 mm) and 50 matching countersunk screws (3.5 x 35 mm), providing everything needed for secure and long-lasting installation of the mounting clips.Thanks to the innovative 2-component technology of the fischer DuoPower wall plugs, this mounting kit is suitable for almost all common wall materials. The plug automatically adapts to the substrate and expands, folds or knots depending on the building material, ensuring maximum holding power and reliability.Your Benefits at a GlanceRecommended for installing our skirting boards with clip mounting systemComplete set with 50 wall plugs and 50 matching screwsOriginal fischer DuoPower quality for reliable fixingSuitable for almost all common building materialsIntelligent 2-component technology for optimum load distributionIdeal for professionals and DIY enthusiastsNo need to search for compatible screws and wall plugs separatelyPackage Contents50 x fischer DuoPower wall plugs 5 x 25 mm50 x countersunk screws 3.5 x 35 mmSuitable for the Following Building MaterialsConcrete, plasterboard, drywall, perforated brick, lightweight perforated concrete brick, lightweight concrete hollow blocks, hollow-core brick and concrete slabs, hollow calcium silicate brick, solid calcium silicate brick, natural stone, aerated concrete, lightweight concrete solid blocks and solid brick.
Content: 50 Piece (€0.22 / 1 Piece)
Suitable for all white varnished skirting boards.Package size: Set contains 30 T15 screws, dowels and white caps.
Acoustic felt black - 2400 x 600 mmOur acoustic felt in black is the perfect choice for improving room acoustics. With a generous size of 2400 x 600 mm and a thickness of approx. 8 mm, this felt is ideal for acoustic panels and wall cladding. It is made from recycled plastic and offers a sustainable, environmentally friendly solution.Properties:Dimensions: 2400 x 600 mm Thickness: approx. 8 mm Made from sustainable, certified materials with recycled plastic fiber content Easy to process and versatile Advantages:Effective sound absorption for noticeably improved room acoustics Environmentally friendly and durable - made from recycled materials Perfect size for large-area applications and individual adjustments The acoustic felt not only impresses with its excellent functionality, but also with its black color, which gives your room a modern and stylish atmosphere.Discover our acoustic felt in black now and create a quiet, pleasant environment - sustainably and efficiently!
Suitable for all white varnished skirting boards.Package size: Set contains 25x screws 3.5x30mm, 25x dowels 6x30mm.
Content: 25 Piece (€0.12 / 1 Piece)
Premium universal neutral Silicon - 310 ml
Content: 0.31 ml (€25.65 / 1 ml)
100x Fixing Screws Fine Thread 3.5 x 35mm - BlackFixing kit ideal for fixing for our acoustic panels, black phosphate finish.100x screws 3.5 x 35mm - black phosphate finish. We recommend 9 screws per panel.
Content: 100 Piece (€0.15 / 1 Piece)
Allcon 10 construction adhesive Universally applicable one-component construction adhesive, in professional quality. Tested according to DIN EN 204 D4 connects almost all materials easy handling Solvent and silicone free weather and aging resistant Resistant to many chemicals Frost-proof high final strength Compatible with natural stoneProcessing advantages: Processing using standard cartridge presses already loadable after approx. 7 to 10 minutes replaces many other adhesives and glues always the right product at hand Security in the application opened cartridge can be kept for approx. 10 months, unopened for approx. 18 months easy to dose, paintable and recoatable can be used indoors and outdoors Areas of application: Combination of wood, chipboard, fiberboard, MDF, coated panels, metals, aluminum, natural stone, artificial stone such as Corian and Varicor, concrete, marble, ceramics, acrylic, plastics, plasterboard, styrofoam, rigid foam, insulation and much more fasten and secure dowels in the masonry
100 pieces Fischer DuoPower dowels 6x30 mm.
Content: 100 Piece (€0.10 / 1 Piece)
Acoustic felt gray - 2600 x 400 mmOur acoustic felt in grey is the ideal addition to your acoustic panels. At around 8 mm thick, this high-quality felt not only provides optimal sound insulation, but also impresses with its sustainable production from recycled plastic.Properties:Dimensions: 2600 x 400 mm Thickness: approx. 8 mm Made from certified sustainable materials with recycled plastic Fibers. Easy to work with and ideal for a variety of applications. Advantages:Improves room acoustics through excellent sound absorption Sustainable alternative - environmentally friendly and durable Perfect fit for acoustic panels and wall coverings The acoustic felt is both visually appealing and functional. Its subtle grey color blends harmoniously into any room design and creates a modern look.Order your acoustic felt in grey now and optimize the acoustics of your rooms in an environmentally friendly way!
Package size: 100 pcs.
Content: 100 Piece (€0.03 / 1 Piece)
100x fixing screws stainless steel A2 - greyFixing kit ideal for fixing for our acoustic panels, with painted flat head in grey colour.100x screws 4,8x38mm - TX20 - grey We recommend 9 screws per panel.
Content: 100 Piece (€0.25 / 1 Piece)
Contents: STRONG>30 pieces nail dowels 5 x 50mm. Suitable for concrete and solid bricks, hollow blocks and aerated concrete. Can easily be hammered in for quick attachment and readjusted if necessary with a screwdriver. P>
Content: 30 Piece (€0.20 / 1 Piece)
10x fixing screws stainless steel A2 - greyFixing kit ideal for fixing for our acoustic panels, with painted flat head in grey colour.10x screws 4.8x38mm - TX20 - grey We recommend 9 screws per panel.
Content: 10 Piece (€0.60 / 1 Piece)
Package size: 100 pcs.
Content: 100 Piece (€0.04 / 1 Piece)
Fixing screws for acoustic panels - A2 stainless steel with black screw headThese high-quality fastening screws made of A2 stainless steel with black-coated flat round head are the perfect choice for mounting our acoustic panels with black felt. Thanks to the color-coordinated surface, the screws remain almost invisible after installation - ideal for a harmonious, clean wall appearance. Optimally matched screws for black slat wallsThe black screw head blends unobtrusively into the design of the panels and prevents distracting contrasts. At the same time, the stainless steel A2 offers maximum corrosion resistance and ensures long-lasting, secure fastening. Contents10x screws 4.8x38 mm - TX20 - blackRecommended number: 9 screws per panelFor stable, even installation, we recommend at least 9 screws per panel. This fixes the acoustic panel securely to the wall and ensures a permanent, even alignment. Advantages of the fixing screwsStainless steel A2 - robust, rust-free and durable Black coated screw head - perfect for black acoustic panels Almost invisible installation without visual distraction Suitable for wall and ceiling mounting Precise TX drive - secure and clean screwing Ideal for living spaces, offices, studios and interior design projectsApplication areasThese mounting screws are ideal for: Acoustic panels with black felt Lamella walls and design panels Interiors with high aesthetic standards Wall and ceiling installationsWhy these screws are the best choiceThe perfect color match to the panel, the high stability of the stainless steel and the easy processing make these screws the best solution for a high-quality, professional installation. They ensure that the design of the panels is the focus - not the fastening.
Content: 10 Piece (€0.60 / 1 Piece)
Contents: STRONG>100 pieces nail dowels 5 x 50mm. Suitable for concrete and solid bricks, hollow blocks and aerated concrete. Can easily be hammered in for quick attachment and readjusted if necessary with a screwdriver. P>
Content: 100 Piece (€0.17 / 1 Piece)
Professional two-sided adhesive tape.Package size: Role a 25m / Width: 45mm.
Content: 25 M (€1.00 / 1 M)
Contents: STRONG>200 pieces nail dowels 5 x 50mm. Suitable for concrete and solid bricks, hollow blocks and aerated concrete. Can easily be hammered in for quick attachment and readjusted if necessary with a screwdriver. P>
Content: 200 Piece (€0.13 / 1 Piece)
Contents: STRONG>30 pieces nail dowels 6 x 80 mm. Suitable for concrete and solid bricks, hollow blocks and aerated concrete. Can easily be hammered in for quick attachment and readjusted if necessary with a screwdriver. P>
Content: 30 Piece (€0.30 / 1 Piece)
Mounting Kit for Pipe Cover Skirting Boards Suitable mounting kit for our 45 x 110 mm plastic pipe cover skirting boards as well as the SLF and SLL models. For secure installation, each mounting bracket requires 1 screw and 1 wall plug. When using a corner bracket, 2 screws and 2 wall plugs are required.The set includes: 4 TX stainless steel screws 5 x 80 mm 4 fischer DuoPower wall plugs 8 x 40 mm The included fischer DuoPower wall plugs provide reliable fixing in a wide range of building materials.Suitable for: Concrete Solid brick Solid calcium silicate brick Aerated concrete Perforated brick Hollow calcium silicate brick Gypsum plasterboard Lightweight concrete hollow block Hollow-core ceilings made of brick, concrete or similar materials Natural stone Lightweight concrete solid block
Content: 4 Piece (€0.99 / 1 Piece)
Fasteners & Clips - Safe installation for your skirting boards and profiles
With our fasteners and clips, you can ensure safe and professional installation of your skirting boards and profiles. Whether skirting boards, wall and ceiling profiles or special floor profiles - the right fastening solutions are crucial for a stable and long-lasting installation. Our range includes high-quality clips and fixing materials that are easy to use and reliable in function.
Thanks to our well-thought-out systems, skirting boards and profiles can be mounted quickly and without visible screws, contributing to a clean and modern appearance. The clips are optimally matched to our skirting boards and profiles to ensure the best possible fit and stability.
Discover our range of fasteners and clips and make your projects durable and safe. With our fastening solutions, you can rely on quality and easy installation for your living and working spaces!