OLI-NATURA Scandic Oil Classic 5 l
€175.00
% Regular price: €219.95 (20.44% saved)
Available, delivery time: 3 - 5 working days
OLI-NATURA Scandic Oil - Classic
Parquet oil in raw wood effect
OLI-NATURA Scandic Oil - Classic is inspired by Scandinavian style and combines a natural look with surface protection. It makes light wood look as if untreated and freshly sanded. The natural colour of the wood is almost unfired (highlighted). Only during processing does a colour deepening appear in the wet phase. This, however, disappears in the course of drying.
This oil gets its raw wood effect from a VOC-free compound of vegetable oils, which we emulsify in water. Added to this is a fine pinch of light-stable white pigments, which round off the raw wood effect and provide UV protection. Due to its low viscosity, Scandic-Oil Classic is recommended for roller application on light wood floors such as oak, fir, spruce or ash.
The dried coating is harmless to humans, animals and plants, complies with DIN EN 71-3 ( Safety of toys) as well as DIN 53160 ( Saliva and perspiration resistant) and is a building product approved by the German Institute for Building Technology (DIBt). Thanks to the intelligent formulation, the oil-soaked rags, pads or brushes do not tend to self-ignite
.The application
Preparation:Sand the wood surface carefully. Start with coarse sanding. Final sanding for furniture surfaces with P240 grit. Wood moisture content: 8-12%. The surface must be dry, thoroughly cleaned and free of oil, wax, grease, silicone and sanding dust. Apply material at room temperature.
Application: For the first oil application, apply oil evenly and generously with a short-pile microfibre roller. Work quickly because of the rapid drying and avoid rolling into oil that has already dried. Allow the surface to dry for at least 2-3 hours. Then sand the dried oil application intermediately with grit P220-P280. A P220 sanding sponge is best for this - Dust the surface well. Apply the second oil coat evenly with a microfibre roller and allow to dry. During application, a colour deepening occurs in the wet phase, which disappears after complete drying.
The surface is dry and brittle? The water resistance is weakening? - Now it's time for maintenance! The following applies to everyday cleaning:
Regular dusting forms the basis. Regular damp care with wood soap ensures quick cleanliness and regreasing. Never use all-purpose or conventional household cleaners, as these can leach out the wood and attack the protection. The wood can always be refreshed with OLI-Natura Wood Refresher. It renews the protective effect and provides a water-repellent surface without changing the colour tone of the wood. Worn areas on floors or stairs that have been treated with OLI-NATURA Scandic-Oil can be partially sanded and re-oiled without having to re-treat the entire surface.
Consumption: With 2 applications and depending on the absorbency of the substrate, approx. 60-80g per m² this corresponds to 12-15 m² per litre.
Drying: Depending on humidity and temperature, the surface is: dust-dry after 1 hour, carefully walkable after 2 hours. Protect from water during the first 3-5 days until complete curing.
| Content: | 5 l |
|---|
Oli Lacke GmbH
Bahnhofstraße 22
09244 Lichtenau
Deutschland
Telefon: +49 37208 840
E-Mail: info@oli-lacke.de
Accessories
Tool
wolfcraft contour gauge For scanning and transferring cutting progressions Needle template made of high-quality plastic for the removal of profiles up to 130 mm wide and 30 mm deep clamping lever for stable fixing of the needles ideal for precise fitting of laminate, e.g. B. to cut out heating pipes
bevel and cutting box from wolfcraft - for exact mitres great 2-in-1 product for precise skirting boards for measuring angles and sawing precise mitres for tapping 85 ° -180 ° angles error-free transfer of the miter angle to the saw integrated guide pins for precise sawing
Floor fitting from wolfcraft For precisely measuring and transferring the last row of laminate sliding wheels and spring-guided sliding elements for exact and comfortable adjustment to the course of the wall easy and precise transfer of dimensions up to 23.5 cm deep extra-wide rail for stable support on the board with various dimensional adjustment options
Universal square from wolfcraft - measuring, scribing and drawing For measuring, scribing, drawing and guided cutting Flat angle, angle measuring scale, parallel marker, marking template and drilling jig for concealed hinges in one device removable plastic stop for precise work on surfaces or on edges high quality metal design, scaled on both sides
wolfcraft markings for folding rules For scribing and marking workpieces transforms any standard folding rule into a marking rule Centering pin for drawing circles high-quality 2-part plastic design
wolfcraft 3-D miter bracket For machining three-dimensional workpieces stops for 45 ° and 90 ° angles can be used as a mark for parallel lines integrated drilling jig for determining the drill diameter
Hand saw from wolfcraft - ideal for sawing wood saws wood, blockboard, plastic-coated, chipboard and skirting boards up to 72 mm thick made of HCS with set and ground sharp-toothed teeth ergonomic wooden handle for comfortable handling ideal for sawing skirting boards in the cutting box
wolfcraft saw - powerful and versatile suitable for sawing wood, plastic and plasterboard high quality sheet L = 350 mm conically ground and hardened tooth tips with impact-resistant, robust plastic handle durable, powerful and versatile
wolfcraft Profi dual safety cutter Professional safety knife - For the safe cutting of solid materials. 2 setting options: security function or autolock robust metal housing with ergonomic soft zone with cord cutter and integrated blade magazine, including 3 replacement blades Well suited for: vinyl, cord, cardboard, string, roofing felt, foil, carpet, packaging tape.
wolfcraft universal folding knife, serrated blade Versatile leisure knife for hobby, craft and outdoor activities. 75 mm blade with serrated edge ergonomic metal housing with aluminum handle scales
Replacement blades for wolfcraft trapezoidal blade knives. Professional trapezoidal blades, 0.5 mm thick, 52 mm long.
Content: 5 Piece (€0.44 / 1 Piece)
bevel and cutting box from wolfcraft - for exact mitres great 2-in-1 product for precise skirting boards for measuring angles and sawing precise mitres for tapping 85 ° -180 ° angles error-free transfer of the miter angle to the saw integrated guide pins for precise sawing
Product Description MG 400 Cartridge GunThe MG 400 impresses with a powerful dispensing force of 180 kg, making it suitable not only for silicone and acrylic but also for adhesives from 310 ml cartridges effortlessly and efficiently. Thanks to the integrated grip width adjustment, the gun can be ergonomically adapted to fit your hand size. The high-quality two-component handle ensures comfortable handling and enables fatigue-free work even during extended use. The 360° rotatable cartridge holder allows you to adjust the working angle individually, offering maximum flexibility. An automatic drip-stop mechanism prevents material from continuing to flow unintentionally, ensuring clean results every time. Additionally, the practical ladder hook allows for secure and convenient hanging of the MG 400 ideal when you need a free hand temporarily. Suitable MaterialsSilicone Acrylic Adhesive Product FeaturesPowerful 180 kg dispensing force for effortless application Individually adjustable grip width for optimal comfort Ergonomic two-component handle for fatigue-free operation 360° rotatable cartridge sleeve for flexible working angles Half-open shell for quick and easy cartridge changes Automatic drip-stop ensures clean work with no dripping Ladder hook for convenient storage on the job Technical DataProduct dimensions (W x D x H): 420 x 65 x 170 mm Dispensing force: 180 kg
