OLI-NATURA - Project-Oil 250ml Natural/Colourless
€15.95
% Regular price: €16.95 (5.9% saved)
Available, delivery time: 5 - 7 working days
OLI-NATURA Project Oil
Deep-acting universal oil
.OLI-NATURA Project Oil, based on natural oils, is used for the treatment of furniture, stairs and floorboards on almost all types of wood. It gives the wood a colour-deepening appearance and the grain emerges wonderfully. It has a solid content of 60 %, penetrates deep into the pores and protects the wood reliably from the inside. The deep penetration of the oil produces a clearly darker colour, the so-called permanent wet effect. It does not form a surface layer, but rather represents an open-pore impregnation. Thanks to the high self-penetration of the project oil, it is particularly easy to apply and very economical. With only one to two applications, extremely water- and dirt-repellent wood surfaces are achieved that are easy to maintain and repair-friendly. The project oil is ideal for all leached, untreated, sanded or new wood surfaces, but also for coarse chipboard (OSB) and cork in interior areas.
The cured material is harmless to humans, animals and plants. It complies with DIN EN 71-3 (Safety of toys) as well as DIN 53160 (Saliva and perspiration fastness) and is a building product approved by the German Institute for Building Technology (DIBt).
The application
Preparation:Sand wood surface carefully, start with coarse sanding, final sanding for furniture P180-240, for floors P100-150. The surface must be dry, thoroughly cleaned and free from oil, wax, grease, silicone and sanding dust. Apply material at room temperature and shake/stir well!
In furniture: Apply oil thinly and evenly in the direction of the grain with a flat brush/surface brush. After 20-30 minutes exposure time in the wet phase, massage in with a pad (white or beige) or buff out with a cotton cloth/oil absorbent cloth until the surface appears evenly matt. Remove any excess oil with a cotton cloth/oil absorbent cloth. If necessary, a second coat can be applied as described above after drying overnight.
In the parquet area: Apply oil evenly thinly in sections for 5-10 m² with an oil roller, oil applicator, oil brush or flat brush. After 20-30 minutes exposure time in the wet phase, massage in with white or beige pad by hand or single-disc machine until the surface appears evenly matt. Remove any excess oil with a cotton cloth/oil absorbent cloth. After drying overnight, apply a second coat as described above.
.The surface is dry and brittle? The water resistance and colour depth is decreasing? - Now it's time for maintenance!
In order to maintain the protective effect, oiling should be done occasionally. To do this, simply apply a little oil to a beige pad or cotton cloth and gently massage it in.
The following applies to everyday cleaning:
Regular dusting forms the basis. For light soiling, it is usually sufficient to wipe the surface with a damp cotton cloth and then wipe dry. Stubborn dirt can be removed gently with our wood soap - diluted with water or pure, depending on the degree of soiling. Do not use all-purpose or conventional household cleaners, as these can leach out the wood and attack the protection. To maintain the protective effect, oil the wood occasionally. To do this, simply apply a little oil to a beige pad or cotton cloth and massage in gently.
Consumption: 1-2 applications | Depending on the absorbency of the substrate, approx. 40-50 g/m² per application (20-25 m²/l)
.Drying: Depending on humidity and temperature, the surface is dust-dry after 1-2 hours and fully cured after 2-3 days. Protect from water during this time.
Note: Oil-soaked rags/pads can self-ignite due to heat build-up! Therefore, clean them immediately after use or store them under water. The product itself is not self-igniting.
Oli Lacke GmbH
Bahnhofstraße 22
09244 Lichtenau
Deutschland
Telefon: +49 37208 840
E-Mail: info@oli-lacke.de
Accessories
Content: 5 Piece (€0.13 / 1 Piece)
Content: 5 Piece (€2.51 / 1 Piece)
Tool
wolfcraft contour gauge For scanning and transferring cutting progressions Needle template made of high-quality plastic for the removal of profiles up to 130 mm wide and 30 mm deep clamping lever for stable fixing of the needles ideal for precise fitting of laminate, e.g. B. to cut out heating pipes
bevel and cutting box from wolfcraft - for exact mitres great 2-in-1 product for precise skirting boards for measuring angles and sawing precise mitres for tapping 85 ° -180 ° angles error-free transfer of the miter angle to the saw integrated guide pins for precise sawing
Floor fitting from wolfcraft For precisely measuring and transferring the last row of laminate sliding wheels and spring-guided sliding elements for exact and comfortable adjustment to the course of the wall easy and precise transfer of dimensions up to 23.5 cm deep extra-wide rail for stable support on the board with various dimensional adjustment options
Universal square from wolfcraft - measuring, scribing and drawing For measuring, scribing, drawing and guided cutting Flat angle, angle measuring scale, parallel marker, marking template and drilling jig for concealed hinges in one device removable plastic stop for precise work on surfaces or on edges high quality metal design, scaled on both sides
wolfcraft markings for folding rules For scribing and marking workpieces transforms any standard folding rule into a marking rule Centering pin for drawing circles high-quality 2-part plastic design
wolfcraft 3-D miter bracket For machining three-dimensional workpieces stops for 45 ° and 90 ° angles can be used as a mark for parallel lines integrated drilling jig for determining the drill diameter
Hand saw from wolfcraft - ideal for sawing wood saws wood, blockboard, plastic-coated, chipboard and skirting boards up to 72 mm thick made of HCS with set and ground sharp-toothed teeth ergonomic wooden handle for comfortable handling ideal for sawing skirting boards in the cutting box
wolfcraft saw - powerful and versatile suitable for sawing wood, plastic and plasterboard high quality sheet L = 350 mm conically ground and hardened tooth tips with impact-resistant, robust plastic handle durable, powerful and versatile
wolfcraft Profi dual safety cutter Professional safety knife - For the safe cutting of solid materials. 2 setting options: security function or autolock robust metal housing with ergonomic soft zone with cord cutter and integrated blade magazine, including 3 replacement blades Well suited for: vinyl, cord, cardboard, string, roofing felt, foil, carpet, packaging tape.
wolfcraft universal folding knife, serrated blade Versatile leisure knife for hobby, craft and outdoor activities. 75 mm blade with serrated edge ergonomic metal housing with aluminum handle scales
Replacement blades for wolfcraft trapezoidal blade knives. Professional trapezoidal blades, 0.5 mm thick, 52 mm long.
Content: 5 Piece (€0.44 / 1 Piece)
bevel and cutting box from wolfcraft - for exact mitres great 2-in-1 product for precise skirting boards for measuring angles and sawing precise mitres for tapping 85 ° -180 ° angles error-free transfer of the miter angle to the saw integrated guide pins for precise sawing
Product Description MG 400 Cartridge GunThe MG 400 impresses with a powerful dispensing force of 180 kg, making it suitable not only for silicone and acrylic but also for adhesives from 310 ml cartridges effortlessly and efficiently. Thanks to the integrated grip width adjustment, the gun can be ergonomically adapted to fit your hand size. The high-quality two-component handle ensures comfortable handling and enables fatigue-free work even during extended use. The 360° rotatable cartridge holder allows you to adjust the working angle individually, offering maximum flexibility. An automatic drip-stop mechanism prevents material from continuing to flow unintentionally, ensuring clean results every time. Additionally, the practical ladder hook allows for secure and convenient hanging of the MG 400 ideal when you need a free hand temporarily. Suitable MaterialsSilicone Acrylic Adhesive Product FeaturesPowerful 180 kg dispensing force for effortless application Individually adjustable grip width for optimal comfort Ergonomic two-component handle for fatigue-free operation 360° rotatable cartridge sleeve for flexible working angles Half-open shell for quick and easy cartridge changes Automatic drip-stop ensures clean work with no dripping Ladder hook for convenient storage on the job Technical DataProduct dimensions (W x D x H): 420 x 65 x 170 mm Dispensing force: 180 kg
