OLI-NATURA High Solid professional oil 1 l

OLI-NATURA High Solid Professional Oil

Protects wood furniture surfaces at the highest level

The OLI-NATURA HS Profi Oil based on natural oils is particularly well suited for floorboards, parquet and wooden floors. The solvent-free OLI-NATURA HS Profi Oil protects wooden surfaces at the highest level. Thanks to the high solid content of 100%it is highly productive and creates an extremely durable, dirt and water-repellent natural oil surface with its matt look and natural feel, which is not only at the feet of barefoot lovers.

The OLI-NATURA HS Professional Oil is based on modified vegetable oils such as linseed oil and wood oil. It offers the highest Giscode rating Ö10+ because it is formulated without solvents and is free of oximes and cobalt. That is why our OLI-NATURA HS Profiöl is so healthy for the home and suitable for children's toys. At the same time, the cured material is saliva- and perspiration-proof and thus harmless tohumans, animals and plantsas well as a building product approved by the German Institute for Building Technology (DIBt).

The application

Preparation:Sand wood surface carefully, start with coarse sanding, final sanding for furniture P180-240, for floors P100-150. The surface must be dry, thoroughly cleaned and free from oil, wax, grease, silicone and sanding dust. Apply material at room temperature and shake/stir well!

In the furniture area: Apply oil thinly and evenly in the direction of the grain with a flat brush/surface brush. After 30 minutes exposure time in the wet phase, massage in with beige pad until the surface appears evenly matt. Remove any excess oil with a cotton cloth/oil absorbent cloth. Alternatively, the oil can also be sanded into the wood with a soaked, fine sanding fleece. After a short reaction time, remove any excess oil with a cotton cloth/oil absorbent cloth. The surface should appear evenly matt.

In the parquet area: Apply oil evenly thinly in sections for 5-10 m² with a microfibre roller, oil applicator, oil brush or flat brush. After 30-60 minutes, massage in with a single-disc machine and beige pad until the wood is saturated and appears evenly matt. For final polish and to remove any excess oil, buff out with a polishing pad/oil absorbent cloth.

The surface is dry and brittle? The water resistance and colour depth is diminishing? - Now it's time for maintenance!
In order to maintain the protective effect, oiling should be done occasionally. To do this, simply apply a little oil to a beige pad or cotton cloth and gently massage it in.

The following applies to everyday cleaning:
Regular dusting forms the basis. For light soiling, it is usually sufficient to wipe the surface with a damp cotton cloth and then wipe dry. Stubborn dirt can be removed gently with our wood soap - diluted with water or pure, depending on the degree of soiling. Do not use all-purpose or conventional household cleaners, as these can leach out the wood and attack the protection. To maintain the protective effect, oil the wood occasionally. To do this, simply apply a little oil to a beige pad or cotton cloth and massage in gently.

Consumption: 1-2 applications | Depending on the absorbency of the substrate, approx. 40-50 g/m² per application (20-25 m²/l)

Drying: Depending on humidity and temperature, the surface is dust-dry after 1-2 hours and fully cured after 2-3 days. Protect from water during this time.

Note: Oil-soaked rags/pads can self-ignite due to heat build-up! Therefore, clean them immediately after use or store them under water. The product itself is not self-igniting.