Dr. Schutz Full Care Matt - 750 ml
€10.85*
Available, delivery time: 3 - 5 working days
Matt polymer dispersion for the care of newly laid or thoroughly cleaned floor coverings and for refreshing PU-finished floors.
- Protects the floor with an elastic and matt care film.
- Dirt adhesion is reduced.
- Acts as an anti-slip agent.
- Meets the requirements of DIN 18032 (slip behaviour) for sports floors.
- Metal-free.
Application:
Floor coverings made of PVC, CV and linoleum. Application on polyolefin, rubber and stone floors is possible on an object-specific basis and must be tested beforehand.
Application:
Care for newly laid/ground-cleaned floors and refreshing PU-finished coverings:Shake well before use. Apply an even, thin film, undiluted, lengthwise to the surface after it has been thoroughly or thoroughly cleaned, using a weed wiper or similar tool. When the care film is resistant to foot traffic, repeat the process in the cross repeat the process. In heavily used areas, apply a third coat lengthwise after drying. Allow the care film to dry for at least 12 hours before use. To refresh PU-finished floors, clean the floor thoroughly with basic cleaner or PU cleaner before application.
.Maintenance cleaning:
Dilute Full Care Matt in a ratio of 1:100 - 1:200 (50-100 ml to 10 litres of water) and clean the floor with this solution by wet mopping. The procedure is suitable for removing light soiling.
Consumption:
Introductory care/refreshing: approx. 2 litres per 100 sqm (dilution 1:10).Maintenance cleaning: approx. 0.2 litres per 100 sqm (dilution 1:200).
| Content: | 750 ml |
|---|
Dr. Schutz GmbH
Holbeinstraße 17
53175 Bonn
Deutschland
Telefon: +49 228/95 35 2-0
E-Mail: info@dr-schutz.com
Tools
Content: 5 Piece (€0.50* / 1 Piece)
