OLI-NATURA - Wood care wax 1l natural/colourless

OLI-NATURA wood care wax

Wellness for wood

OLI-NATURA Wood care wax made from vegetable oils and waxes is suitable for all furniture, stairs and floors made of wood and cork that have been treated with hard wax oil. The high-quality oils fill the wood pores again and renew the protective effect from inside. The wax remains on the surface and creates an open-pored and robust film. The care of the wood surface with the care wax is very dirt and water-repellent if used regularly. It regenerates, nourishes and compensates for minor damage. By the way, resource-conscious people will be pleased that the care wax should always be applied sparingly. Of course you do not need your parquet or furniture every week with the care wax treat but it is enough, depending on the type of wood and use, every few months.

OLI-NATURA wood care wax consists of modified vegetable oils, such as soybean oil, and waxes, such as refined carnauba wax, dearomatized hydrocarbons and lead- and cobalt-free drying agents. We do without consciously on the use of critical substances such as preservatives, formaldehydes, aromatics, biocides, cobalt salts and oximes.

The hardened material is harmless to humans, animals and plants. It complies with DIN EN 71-3 (safety of toys) and DIN 53160 (resistance to saliva and perspiration).

The application:

Preparation: We recommend dry cleaning and damp cleaning with wood soap before any maintenance. Let the surface dry completely. Shake the container well before use.

Processing: Soak a white pad or cotton cloth with the wood care wax and massage into the wood. Remove the excess after a maximum of 10 minutes with a dry cotton cloth/oil absorbent cloth. There must be no excess material on the surface stay behind. For large areas, you can apply the care wax thinly and evenly with a sprayer or wiper. After a maximum of 10 minutes, massage in the excess with a white pad by hand or with a polishing machine. eventual Remove excess with a cotton cloth/oil absorbent cloth.

Consumption: Depending on the absorbency of the wood, around 10-20 g/m² per application is sufficient for aftercare. This corresponds to around 50-100 m² per liter.

Drying: Allow the surface to dry for at least 12 hours before use. Do not wipe with a damp cloth for the first few days.

Note: Cloths/pads soaked in oil can self-ignite if heat builds up! Therefore, clean them immediately after use or store them under water. The product itself is not self-igniting.