Skip to main content Skip to search Skip to main navigation
FREE SKIRTING SAMPLE SHIPPING
FREE SHIPPING FROM A GOODS VALUE OF EUR 250.00

Cover strips: Elegant solution for old tile skirting

Replacing a floor covering is often associated with a lot of effort, dirt and time. Tiles in particular are difficult to remove – and are often no longer desired to be visible.

A smart alternative: Instead of laboriously chiseling off old tile skirting, they can be simply and neatly covered with modern cover strips. This creates a visually appealing wall finish – without major construction work.

Our cover strips are ideal for rooms where a new floor covering such as laminate, click vinyl, PVC, cork or parquet is laid over existing tiles. While the new floor is simply laid on top, the old tile skirting usually remains – but then looks unattractive and no longer matches the overall appearance.

With our cover strips for tile skirting as well as matching pipe cover strips, you can quickly create harmonious transitions and a clean finish. Renovation becomes much easier and, above all, dust-free.

Filter products
Heat Pipe Cover White 120 x 60 x 2.400 mm
Heating pipe cladding / pipe cover strip 120 mm white Our pipe cover strip in white in the dimensions 120 x 60 x 2,400 mm impresses with its simple and timeless design. With this bar, visible heating pipes or the like can easily be covered . The inside dimensions of the Cover strips are 114 mm in height and 45 mm in width. The height of the heating pipe cladding can be individually adjusted. Details at a glance: Mounting strip included in delivery Material: MDF (medium density fibreboard) Decorative lamination "White" Installation with the help of a mounting strip External dimensions: 120 x 60 x 2,400 mm Inside dimensions: 114 x 45 x 2,400 mm Material: The heating pipe cladding strip has an MDF core (MDF - medium-density fibreboard). This gives the bar sufficient stability. The quality decorative lamination not only makes the cover bar shine in a great look, but also also creates a protective property. The surface is scratch-resistant and makes the bar durable . Installation instructions: A "mounting bar" is included in the scope of delivery for easy fastening of the heating pipe cladding . We recommend pre-drilling the mounting bar and fixing it to the wall at the desired height with screws (not included). Alternatively, it can also be installed with glue on the skirting board. The heating pipe cladding can be individually adjusted to the height and attached to the mounting rail with screws or glue. Our skirting board fastening set is suitable for this in white or our last adhesive. Note : The accessories required for assembly, such as screws or strip adhesives, must be ordered separately.
Product number: 06010001-76

Content: 2.4 M (€11.23* / 1 M)

€26.95*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
STCK
Cover skirting 100mm white
Cover strip for tile base 100mm white Our cover strip for tile plinths 100mm in white in the dimensions 19 x 100 x 2,600 mm beautify every room with their simple and modern design. The back has a cutout of 13 x 85 mm . This allows, for example, tile bases or cables cover very quickly and easily . The cover strip saves you a lot of time and effort , which you need to e.g. remove an old tile base and repair the damage to the wall. Details at a glance: Decorative lamination "White" Material: MDF core Fastening: adhesive mounting Inside dimensions: 13 x 85 x 2,600 mm Deck dimensions: 19 x 100 x 2,600 mm Material: The cover strip has a core made of MDF (MDF - medium-density fibreboard). This gives the skirting board sufficient flexibility and stability . The quality decorative lamination not only makes the cover strip shine in a great look, but also creates a protective property. The surface is scratch-resistant and makes the skirting board durable . Assembly: The strips can be attached to the wall with the help of our strip adhesive . During renovation work, old tile bases can not only be covered quickly and easily, but also non-destructively .
Product number: 06010100-76

Content: 2.6 M (€4.81* / 1 M)

€12.50*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
STCK
Cover skirting 80mm white
Cover strip for tile base 80mm white Our cover strip for tile base 80mm in white in the dimensions 19 x 80 x 2,600 mm beautify every room with their simple and modern design. The back has a cutout of 13 x 65 mm . This allows, for example, tile bases or cables cover very quickly and easily . The cover strip saves you a lot of time and effort , which you need to e.g. remove an old tile base and repair the damage to the wall. Details at a glance: Decorative lamination "White" Material: MDF core Fastening: adhesive mounting Inside dimensions: 13 x 65 x 2,600 mm Deck dimensions: 19 x 80 x 2,600 mm Material: The cover strip has a core made of MDF (MDF - medium-density fibreboard). This gives the skirting board sufficient flexibility and stability . The quality decorative lamination not only makes the cover strip shine in a great look, but also creates a protective property. The surface is scratch-resistant and makes the skirting board durable . Assembly: The strips can be attached to the wall with the help of our strip adhesive . During renovation work, old tile bases can not only be covered quickly and easily, but also non-destructively .
Product number: 06010080-76

Content: 2.6 M (€4.42* / 1 M)

€11.50*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
STCK
Heat Pipe Cover White 120 x 60 x 2.400 mm
Heating pipe cladding / pipe cover strip Berlin profile 120 mm white Our pipe cover strip Berliner Profil in white in the dimensions 120 x 60 x 2,400 mm impresses with its simple and timeless design. With this bar, visible heating pipes or the like can easily be covered . The inside dimensions of the Cover strips are 114 mm in height and 45 mm in width. The height of the heating pipe cladding can be individually adjusted. Details at a glance: Mounting strip included in delivery Popular "Berlin Profile" Material: MDF (medium density fibreboard) Decorative lamination "White" Installation with the help of a mounting strip External dimensions: 120 x 60 x 2,400 mm Inside dimensions: 114 x 45 x 2,400 mm Material: The heating pipe cladding strip has an MDF core (MDF - medium-density fibreboard). This gives the bar sufficient stability. The quality decorative lamination not only makes the cover bar shine in a great look, but also also creates a protective property. The surface is scratch-resistant and makes the bar durable . Installation instructions: A "mounting bar" is included in the scope of delivery for easy fastening of the heating pipe cladding . We recommend pre-drilling the mounting bar and fixing it to the wall at the desired height with screws (not included). Alternatively, it can also be installed with glue on the skirting board. The heating pipe cladding can be individually adjusted to the height and attached to the mounting rail with screws or glue. Our skirting board fastening set is suitable for this in white or our last adhesive. Note : The accessories required for assembly, such as screws or strip adhesives, must be ordered separately.
Product number: 06010000-87

Content: 2.4 M (€12.48* / 1 M)

€29.95*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
STCK
Cover skirting 120mm white
Berlin profile - cover strip for tile base 120mm white Our Berlin profile cover strip for tile base 120mm white in the dimensions 19 x 120 x 2,600 mm , beautify every room with the popular Berlin profile and its modern design. The back has a cutout of 13 x 80 mm . This allows, for example, tile bases or cables cover very quickly and easily . The cover strip saves you a lot of time and effort , which you need to e.g. remove an old tile base and repair the damage to the wall. Details at a glance: Decorative lamination "White" Material: MDF core Fastening: adhesive mounting Inside dimensions: 13 x 80 x 2,600 mm Deck dimensions: 19 x 100 x 2,600 mm Material: The cover strip has a core made of MDF (MDF - medium-density fibreboard). This gives the skirting board sufficient flexibility and stability . The quality decorative lamination not only makes the cover strip shine in a great look, but also creates a protective property. The surface is scratch-resistant and makes the skirting board durable . Assembly: The strips can be attached to the wall with the help of our strip adhesive . During renovation work, old tile bases can not only be covered quickly and easily, but also non-destructively .
Product number: 06010120-87

Content: 2.6 M (€5.58* / 1 M)

€14.50*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
STCK
%
Tip
Heating pipe cladding / pipe cover strip HZ SLF 2000 - white
Pipe cladding, pipe cover, heating pipe cladding/pipe cover strip SLF plastic whiteOur heating pipe cover made of plastic in white in the dimensions 39 x 95 x 2000 mm impresses with its simple and timeless design. This strip makes it easy to cover heating pipes, cables or similar. Since the profile is made of plastic and has a sealing lip on the top, it is protected against moisture and splashing water and can therefore also be easily installed in the bathroom or kitchen.The SLF profile is the universal skirting board profile for pipes up to max. 22 mm. It is a stable plastic hollow chamber profile with a sealing lip to the wall to compensate for uneven walls. The extremely durable material of the profiles is characterized by high impact resistance. Blanking strips are available to match the SLF profile for walls without pipes. Details at a glance:Pipe cover / heating pipe cladding white Material: PVC plastic Integrated sealing lip Dimensions: 39 x 95 x 2,000 mm Installation with the aid of fastening clipsInstallation:The heating pipe cladding is installed using special fastening clamps. These are suitable for up to 2 pipes with a maximum diameter of up to 22 mm. First, the fixing clips are screwed to the wall and then the strips are clicked onto them. Suitable corners, connectors and end caps are also available for the cover strips to ensure neat and tidy installation.No chiseling of wall slots hardly any construction waste low noise and dust pollution permanent, easy accessibility of the installation short installation times cost advantageNote: The mounting brackets and corners are not included in the scope of delivery.
Product number: SLFPROFIL-WE

Content: 2 M (€7.00* / 1 M)

€13.99* €19.95* (29.87% saved)
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
STCK
%
Tip
Heating pipe cladding / pipe cover strip 45 x 110 mm plastic white
Heating pipe cladding/pipe cover strip 110 mm white plasticOur heating pipe cover made of plastic in white and measuring 45 x 110 mm impresses with its simple and timeless design. Heating pipes, cables or the like can be easily covered with this strip. Because the strip is made of plastic and has a sealing lip on the top, it is protected against moisture and splash water and can therefore also be easily installed in the bathroom or kitchen become.Details at a glance:Pipe cover strip white Material: Plastic PVC integrated sealing lip Dimensions: 45 x 110 x 2,000 mm Mounting with the help of mounting clampsAssembly:The heating pipe cover is mounted using special fastening clamps. These are suitable for up to 2 tubes with a maximum diameter of 28mm. First, the mounting brackets are screwed to the wall and then the strips are clicked onto them. There are also matching corners, connectors and end caps for the cover strips for neat and clean installation.Note: The mounting brackets and the corners are not included in the scope of delivery.
Product number: 06010039-76

Content: 2 M (€8.25* / 1 M)

€16.49* €22.95* (28.15% saved)
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
STCK
Tip
Heating pipe cladding / pipe cover strip HZ SLF PLUS - white
Pipe cladding, pipe cover, heating pipe cladding/pipe cover strip SLF PLUS - with extra sealing lip, white plasticOur heating pipe cover made of plastic in white, measuring 39 x 95 x 2000 mm, impresses with its simple and timeless design. This strip makes it easy to cover heating pipes, cables or similar. Since the skirting is made of plastic and has a sealing lip on the top and bottom, it is ideally protected against moisture and splash water and can therefore also be easily installed in the bathroom or kitchen.The SLF PLUS profile is for uneven walls and floors for pipes up to max. 22 mm. It is a stable plastic hollow chamber profile with a sealing lip to the wall and an additional sealing lip on the lower edge of the profile to compensate for uneven walls and floors. The extremely durable material of the profiles is characterized by high impact resistance. Details at a glance:Pipe cover / heating pipe cladding white Material: PVC plastic Integrated sealing lip Dimensions: 39 x 95 x 2,000 mm Installation with the aid of fastening clipsInstallation:The heating pipe cladding is installed using special fastening clamps. These are suitable for up to 2 pipes with a maximum diameter of up to 22 mm. First, the fastening clips are screwed to the wall and the strips are then clicked onto them. There are also matching corners, connectors and end caps for the cover strips to ensure neat and tidy installation.no chiseling of wall slots No construction waste low noise and dust pollution permanent, easy accessibility of the installation short installation times cost advantageNote: The mounting brackets and corners are not included in the scope of delivery.
Product number: SLFPLUS-WE

Content: 2 M (€8.48* / 1 M)

€16.95*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
STCK
Pipe cover strip natural oak 120 x 60 x 2.400mm
Heating pipe cladding / pipe cover strip 120mm oak nature Our pipe cover strip in oak nature in the dimensions 120 x 60 x 2,400 mm impresses with its simple and timeless design. With this bar, visible heating pipes or the like can easily be covered . The inside dimensions of the Cover strips are 114 mm in height and 45 mm in width. The height of the heating pipe cladding can be individually adjusted. Details at a glance: Mounting strip included in delivery Material: MDF (medium density fibreboard) Decorative lamination "oak nature" Installation with the help of a mounting strip External dimensions: 120 x 60 x 2,400 mm Inside dimensions: 114 x 45 x 2,400 mm Material: The heating pipe cladding strip has an MDF core (MDF - medium-density fibreboard). This gives the bar sufficient stability. The quality decorative lamination not only makes the cover bar shine in a great look, but also also creates a protective property. The surface is scratch-resistant and makes the bar durable . Installation instructions: A "mounting bar" is included in the scope of delivery for easy fastening of the heating pipe cladding . We recommend pre-drilling the mounting bar and fixing it to the wall at the desired height with screws (not included). Alternatively, it can also be installed with glue on the skirting board. The heating pipe cladding can be individually adjusted to the height and attached to the mounting rail with screws or glue. Our skirting board fastening set is suitable for this in white or our last adhesive. Note : The accessories required for assembly, such as screws or strip adhesives, must be ordered separately.
Product number: 06010001-35

Content: 2.4 M (€15.40* / 1 M)

€36.95*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
STCK
Tip
Heating pipe cladding / pipe cover strip HZ SLL - white
Pipe cladding, pipe cover, heating pipe cladding/pipe cover strip SLL - white plasticOur heating pipe cover made of plastic in white in the dimensions 39 x 127 x 2000 mm impresses with its simple and timeless design. This strip makes it easy to cover heating pipes, cables or similar. Since the strip is made of plastic and has a sealing lip on the top, it is protected against moisture and splash water and can therefore also be easily installed in the bathroom or kitchen.The SLL profile is used for the additional installation of a cable duct (recommended 30 x 30 mm) or when installing a third pipe. It is a stable plastic hollow chamber profile with a sealing lip to the wall to compensate for uneven walls. In combination with the socket outlet container, it is the ideal profile for a quick and cost-effective modernization of your home. Details at a glance:Pipe cover / heating pipe cover white Material: PVC plastic Integrated sealing lip Dimensions: 39 x 127 x 2,000 mm Installation with the aid of fastening clipsInstallation:The heating pipe cladding is installed using special fastening clamps. These are suitable for up to 2 pipes with a maximum diameter of up to 22 mm. First, the fixing clips are screwed to the wall and then the strips are clicked onto them. There are also matching corners, connectors and end caps for the cover strips to ensure neat and tidy installation.no chiseling of wall slots No construction waste low noise and dust pollution permanent, easy accessibility of the installation short installation times additional space, e.g. for electrical installation or 3. piping cost advantageNote: The fixing clips and corners are not included in the scope of delivery.
Product number: SLLPROFIL-WE

Content: 2 M (€12.48* / 1 M)

€24.95*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
STCK
Pipe cover strip black 120 x 60 x 2,400mm
Heating pipe cladding / pipe cover strip 120mm black Our pipe cover strip in black in the dimensions 120 x 60 x 2,400 mm impresses with its simple and timeless design. With this bar, visible heating pipes or the like can easily be covered . The inside dimensions of the Cover strips are 114 mm in height and 45 mm in width. The height of the heating pipe cladding can be individually adjusted. Details at a glance: Mounting strip included in delivery Material: MDF (medium density fibreboard) Decorative lamination "black" Installation with the help of a mounting strip External dimensions: 120 x 60 x 2,400 mm Inside dimensions: 114 x 45 x 2,400 mm Material: The heating pipe cladding strip has an MDF core (MDF - medium-density fibreboard). This gives the bar sufficient stability. The quality decorative lamination not only makes the cover bar shine in a great look, but also also creates a protective property. The surface is scratch-resistant and makes the bar durable . Installation instructions: A "mounting bar" is included in the scope of delivery for easy fastening of the heating pipe cladding . We recommend pre-drilling the mounting bar and fixing it to the wall at the desired height with screws (not included). Alternatively, it can also be installed with glue on the skirting board. The heating pipe cladding can be individually adjusted to the height and attached to the mounting rail with screws or glue. Our skirting board fastening set is suitable for this in white or our last adhesive. Note : The accessories required for assembly, such as screws or strip adhesives, must be ordered separately.
Product number: 06010001-86

Content: 2.4 M (€15.40* / 1 M)

€36.95*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
STCK
Pipe cover strip grey/anthracite 120 x 60 x 2,400mm
Heating pipe cladding / pipe cover strip 120mm Grey/anthracite Our pipe cover strip in Grey/anthracite in the dimensions 120 x 60 x 2,400 mm impresses with its simple and timeless design. With this bar, visible heating pipes or the like can easily be covered . The inside dimensions of the Cover strips are 114 mm in height and 45 mm in width. The height of the heating pipe cladding can be individually adjusted. Details at a glance: Mounting strip included in delivery Material: MDF (medium density fibreboard) Decorative lamination "Grey/anthracite " Installation with the help of a mounting strip External dimensions: 120 x 60 x 2,400 mm Inside dimensions: 114 x 45 x 2,400 mm Material: The heating pipe cladding strip has an MDF core (MDF - medium-density fibreboard). This gives the bar sufficient stability. The quality decorative lamination not only makes the cover bar shine in a great look, but also also creates a protective property. The surface is scratch-resistant and makes the bar durable . Installation instructions: A "mounting bar" is included in the scope of delivery for easy fastening of the heating pipe cladding . We recommend pre-drilling the mounting bar and fixing it to the wall at the desired height with screws (not included). Alternatively, it can also be installed with glue on the skirting board. The heating pipe cladding can be individually adjusted to the height and attached to the mounting rail with screws or glue. Our skirting board fastening set is suitable for this in white or our last adhesive. Note : The accessories required for assembly, such as screws or strip adhesives, must be ordered separately.
Product number: 06010001-80

Content: 2.4 M (€15.40* / 1 M)

€36.95*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
STCK
Pipe cover strip natural Hêtre 120 x 60 x 2.400mm
Heating pipe cladding / pipe cover strip 120mm Beech nature Our pipe cover strip in Beech nature in the dimensions 120 x 60 x 2,400 mm impresses with its simple and timeless design. With this bar, visible heating pipes or the like can easily be covered . The inside dimensions of the Cover strips are 114 mm in height and 45 mm in width. The height of the heating pipe cladding can be individually adjusted. Details at a glance: Mounting strip included in delivery Material: MDF (medium density fibreboard) Decorative lamination "oak nature" Installation with the help of a mounting strip External dimensions: 120 x 60 x 2,400 mm Inside dimensions: 114 x 45 x 2,400 mm Material: The heating pipe cladding strip has an MDF core (MDF - medium-density fibreboard). This gives the bar sufficient stability. The quality decorative lamination not only makes the cover bar shine in a great look, but also also creates a protective property. The surface is scratch-resistant and makes the bar durable . Installation instructions: A "mounting bar" is included in the scope of delivery for easy fastening of the heating pipe cladding . We recommend pre-drilling the mounting bar and fixing it to the wall at the desired height with screws (not included). Alternatively, it can also be installed with glue on the skirting board. The heating pipe cladding can be individually adjusted to the height and attached to the mounting rail with screws or glue. Our skirting board fastening set is suitable for this in white or our last adhesive. Note : The accessories required for assembly, such as screws or strip adhesives, must be ordered separately.
Product number: 06010001-12

Content: 2.4 M (€15.40* / 1 M)

€36.95*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
STCK
Heat Pipe Cover White 90 x 40 x 2.500 mm
Pipe Covering, Heating Pipe Cover/Trim 90mm WhiteDiscover the ideal solution for stylishly covering your visible heating pipes: Our high-quality Pipe Cover Strip 90 x 40 x 2500mm in plain white. This product combines functionality with a timeless design, suitable for any interior.Product Details:Material: MDF (Medium Density Fiberboard) Color: White Decorative Lamination Length of the strip: 2500 mm Height: 90 mm Depth: 40mmFeatures:Stability and Durability: The MDF core ensures high stability and longevity. The special decorative lamination gives the strip an appealing look and makes it scratch-resistant. Easy Installation: The strip is easy to install. First, attach the pipes with clips to the wall. Then, place the necessary corner and end pieces before fitting the cover strip firmly into the grooves.Accessories: (available separately)Suitable accessories such as inner corners, connectors, outer corners, left end pieces, right end pieces, or mounting clips are available separately from us.
Product number: 060104080-76

Content: 2.5 M (€10.78* / 1 M)

€26.95*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
STCK

Cover strips for tiles and pipes - stylish and functional

Our cover strips are the perfect solution for elegantly concealing unsightly tile bases and pipes. Whether you are renovating or redesigning, cover strips create a clean, modern look and give transitions a professional appearance.

Particularly when replacing flooring, old skirting boards or exposed pipes often remain visible, disrupting the overall appearance. This is where our cover strips come into play: they are easy to install and conceal unsightly elements without the need for extensive renovations. Whether in MDF or plastic, our cover strips are available in a range of materials and designs, offering the perfect solution for any setting.

Upgrade your rooms and benefit from an uncomplicated and cost-effective way to create clean wall finishes and elegantly conceal unsightly tile bases. Our cover strips are the ideal choice for anyone looking for a stylish and practical solution.