Adaptatioin profile silver 0.90 m

Aluminum profiles with sub-profile for screwing in a very durable professional quality to compensate height differences of 13 mm to 0 mm.Floor cover height: 6 -13 mm. With increasing blocks up to 18mm

Product number: 04010201-91

Content: 0.9 M (€17.22* / 1 M)

€15.50* €18.95* (18.21% saved)

STCK

Adaptatioin profile high-grade steel matt 0.90 m

Product number: 04010201-92

Content: 0.9 M (€18.78* / 1 M)

€16.90*

STCK

Adaptatioin profile high-grade steel brushed 0.90 m

Aluminium. For covering thicknesses 7-17,5 mm. Flat design without grooves. Height compensation from 17,5 mm to 0 mm. Including base section, grey.

Product number: 04010201-94

Content: 0.9 M (€22.11* / 1 M)

€19.90*

STCK

Adaptatioin profile silver 1,00 m

Product number: 04010203-91

€16.90*

STCK

Adaptatioin profile gold 0.90 m

Product number: 04010201-90

Content: 0.9 M (€18.78* / 1 M)

€16.90*

STCK

Adaptatioin profile high-grade steel matt 2.70 m

Product number: 04010202-92

Content: 2.7 M (€18.48* / 1 M)

€49.90*

STCK

Adaptatioin profile high-grade steel matt 1,00 m

Product number: 04010203-92

€17.90*

STCK

Adaptatioin profile silver 2.70 m

Product number: 04010202-91

Content: 2.7 M (€16.63* / 1 M)

€44.90*

STCK

Adjustment profile Profi-Tec Master Black anodised - 2.70 m

Prinz Adjustable Profile 270 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, problem-free disassembly and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIncludes base profile, grey. The aluminium clip profile system is designed for covering thicknesses of 7 to 17.5 mm. Concealed mounted, these profiles offer a perfect appearance without screw holes..Technical data at a glance:Adaptor profile - black anodised L = 270cm.Material: aluminiumfor covering thicknesses 7 - 17.5 mmHeight adjustment from 17.5 mm down to 0 mm .Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile fits tightly on both sides.At the same time, the curved toothing allows problem-free dismantling.The top profile can be detached if necessary and then anchored back into the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.

Product number: 04003307-99

Content: 2.7 M (€23.89* / 1 M)

€64.50*

STCK

Adaptatioin profile high-grade steel brushed 2.70 m

Aluminium. For covering thicknesses 7-17,5 mm. Flat design without grooves. Height compensation from 17,5 mm to 0 mm. Including base section, grey.

Product number: 04010202-94

Content: 2.7 M (€22.41* / 1 M)

€60.50*

STCK

Adjustment profile ECO-CLIP 2.70 m matt stainless steel

ECO-CLIP adjustment profile 2.70 m in matt stainless steel - powerful and easy processing! ECO-CLIP is a new profile system for the floating installation of floor coverings . ECO-CLIP profiles correspond to the new design line without decorative grooves and in a flat design . Fantastic look thanks to concealed fastening Automatic adjustment in height and inclination Simple, quick and safe installation Upper profile can be easily dismantled at any time The ECO-CLIP profile system is designed for covering thicknesses of 6 to 12 mm . The adjustment profile can compensate for a height difference of up to 12 mm . Thanks to the practical clip system, this adjustment profile can be installed quickly and easily . In addition, it offers a perfect, modern look without screw holes, if sufficient Space for expansion joints. Technical data at a glance: Adjustment profile - matt stainless steel Dimensions 37 x 2,700 mm For covering thicknesses 6 - 12 mm Height adjustment from 12 mm to 0 mm Cover profile made of aluminum Lower profile made of impact-resistant plastic Assembly: Installation is particularly quick and easy. The base profile made of impact-resistant plastic is glued to the substrate. We recommend assembly adhesive for gluing the lower profile. After laying the floor covering, e.g. laminate, the top profile is locked into the base profile. The groove of the base profile is trapezoidal so that the web of the upper profile can be tilted easily. The upper profiles can thus automatically adapt to the floor covering - variable in height and incline. At the same time, the toothing allows easy dismantling.

Product number: 04013441-92

Content: 2.7 M (€14.63* / 1 M)

€39.50*

STCK

Adjustment profile Profi-Tec Master Black anodised - 0.90 m

Prinz Adjustable Profile 90 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, problem-free disassembly and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIncludes base profile, grey. The aluminium clip profile system is designed for covering thicknesses of 7 to 17.5 mm. Concealed mounted, these profiles offer a perfect appearance without screw holes..Technical data at a glance:Adaptor profile - black anodised L = 90cm.Material: aluminiumfor covering thicknesses 7 - 17.5 mmHeight compensation from 17.5 mm down to 0 mm .Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile fits tightly on both sides.At the same time, the curved toothing allows problem-free dismantling.The top profile can be detached if necessary and then anchored back into the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.

Product number: 04001307-99

Content: 0.9 M (€23.22* / 1 M)

€20.90*

STCK

Adaptatioin profile P300 silver 0,90 m

Aluminium. For covering thicknesses 7-17,5 mm. Height compensation from 17,5 mm to 0 mm. Including base section, grey.

Product number: 04013041-91

Content: 0.9 M (€20.56* / 1 M)

€18.50*

STCK

Adaptatioin profile gold 2.70 m

Product number: 04010202-90

Content: 2.7 M (€18.48* / 1 M)

€49.90*

STCK

Adaptatioin profile P300 silver 2.70 m

Aluminium. For covering thicknesses 7-17,5 mm. Height compensation from 17,5 mm to 0 mm. Including base section, grey.

Product number: 04013042-91

Content: 2.7 M (€19.44* / 1 M)

€52.50*

STCK

Adaptatioin profile P300 high-grade steel matt 0,90 m

Aluminium. For covering thicknesses 7-17,5 mm. Height compensation from 17,5 mm to 0 mm. Including base section, grey.

Product number: 04013041-92

Content: 0.9 M (€22.11* / 1 M)

€19.90*

STCK

Adaptatioin profile P300 high-grade steel matt 2.70 m

Aluminium. For covering thicknesses 7-17,5 mm. Height compensation from 17,5 mm to 0 mm. Including base section, grey.

Product number: 04013042-92

Content: 2.7 M (€20.56* / 1 M)

€55.50*

STCK

Adjustment profile ECO-CLIP 0.90 m silver

ECO-CLIP adjustment profile 90 cm in silver - powerful and easy processing! ECO-CLIP is a new profile system for the floating installation of floor coverings . ECO-CLIP profiles correspond to the new design line without decorative grooves and in a flat design . Fantastic look thanks to concealed fastening Automatic adjustment in height and inclination Simple, quick and safe installation Upper profile can be easily dismantled at any time The ECO-CLIP profile system is designed for covering thicknesses of 6 to 12 mm . The adjustment profile can compensate for a height difference of up to 12 mm . Thanks to the practical clip system, this adjustment profile can be installed quickly and easily . In addition, it offers a perfect, modern look without screw holes, if sufficient Space for expansion joints. Technical data at a glance: Adaptation profile - silver Dimensions 37 x 900 mm For covering thicknesses 6 - 12 mm Height adjustment from 12 mm to 0 mm Cover profile made of aluminum Lower profile made of impact-resistant plastic Assembly: Installation is particularly quick and easy. The base profile made of impact-resistant plastic is glued to the substrate. We recommend assembly adhesive for gluing the lower profile. After laying the floor covering, e.g. laminate, the top profile is locked into the base profile. The groove of the base profile is trapezoidal so that the web of the upper profile can be tilted easily. The upper profiles can thus automatically adapt to the floor covering - variable in height and incline. At the same time, the toothing allows easy dismantling.

Product number: 04011441-91

Content: 0.9 M (€16.11* / 1 M)

€14.50*

STCK

Adjustment profile ECO-CLIP 2.70 m silver

ECO-CLIP adjustment profile 2.70 m in silver - powerful and easy processing! ECO-CLIP is a new profile system for the floating installation of floor coverings . ECO-CLIP profiles correspond to the new design line without decorative grooves and in a flat design . Fantastic look thanks to concealed fastening Automatic adjustment in height and inclination Simple, quick and safe installation Upper profile can be easily dismantled at any time The ECO-CLIP profile system is designed for covering thicknesses of 6 to 12 mm . The adjustment profile can compensate for a height difference of up to 12 mm . Thanks to the practical clip system, this adjustment profile can be installed quickly and easily . In addition, it offers a perfect, modern look without screw holes, if sufficient Space for expansion joints. Technical data at a glance: Adaptation profile - silver Dimensions 37 x 2,700 mm For covering thicknesses 6 - 12 mm Height adjustment from 12 mm to 0 mm Cover profile made of aluminum Lower profile made of impact-resistant plastic Assembly: Installation is particularly quick and easy. The base profile made of impact-resistant plastic is glued to the substrate. We recommend assembly adhesive for gluing the lower profile. After laying the floor covering, e.g. laminate, the top profile is locked into the base profile. The groove of the base profile is trapezoidal so that the web of the upper profile can be tilted easily. The upper profiles can thus automatically adapt to the floor covering - variable in height and incline. At the same time, the toothing allows easy dismantling.

Product number: 04013441-91

Content: 2.7 M (€14.63* / 1 M)

€39.50*

STCK

Adjustment profile ECO-CLIP 0.90 m matt stainless steel

ECO-CLIP adjustment profile 90 cm in matt stainless steel - powerful and easy processing! ECO-CLIP is a new profile system for the floating installation of floor coverings . ECO-CLIP profiles correspond to the new design line without decorative grooves and in a flat design . Fantastic look thanks to concealed fastening Automatic adjustment in height and inclination Simple, quick and safe installation Upper profile can be easily dismantled at any time The ECO-CLIP profile system is designed for covering thicknesses of 6 to 12 mm . The adjustment profile can compensate for a height difference of up to 12 mm . Thanks to the practical clip system, this adjustment profile can be installed quickly and easily . In addition, it offers a perfect, modern look without screw holes, if sufficient Space for expansion joints. Technical data at a glance: Adjustment profile - matt stainless steel Dimensions 37 x 900 mm For covering thicknesses 6 - 12 mm Height adjustment from 12 mm to 0 mm Cover profile made of aluminum Lower profile made of impact-resistant plastic Assembly: Installation is particularly quick and easy. The base profile made of impact-resistant plastic is glued to the substrate. We recommend assembly adhesive for gluing the lower profile. After laying the floor covering, e.g. laminate, the top profile is locked into the base profile. The groove of the base profile is trapezoidal so that the web of the upper profile can be tilted easily. The upper profiles can thus automatically adapt to the floor covering - variable in height and incline. At the same time, the toothing allows easy dismantling.

Product number: 04011441-92

Content: 0.9 M (€16.56* / 1 M)

€14.90*

STCK

Aluminum adjustment profiles for floor coverings with height differences

Adjustment profiles made of high-quality aluminum are the ideal solution for connecting floor coverings with different heights in a visually appealing and functional way. They ensure a harmonious transition between different floor coverings, such as laminate to vinyl or parquet.

Thanks to their robust construction, the profiles offer high durability and load-bearing capacity, making them perfect for use in living spaces, offices, or high-traffic areas.

Opt for a modern, consistent look with our aluminum adaptation profiles - available in various widths, lengths, and designs to suit any floor.