End profile for design floors Black anodised - 0.90 m

PROFI DESIGN end profile 90 cm - The perfect profile for design floorings.The Design profile system was specially developed for floating Design floor coverings / LVT.Deck profile in a particularly flat, discreet look.automatic adjustment in height and inclinationquick, simple and secure installationincl. base profileThe aluminium clip profile system is designed for covering thicknesses from 4 to 7.5 mm. The practical clip system makes this transition profile quick and easy to install. In addition, it offers a perfect, modern look without screw holes, with sufficient space for expansion joints.Technical data at a glanceEnd profile Design - L = 90 cmUpper profile: Aluminium - black anodisedBase profile: Hard PVCFor installation heights of 4 - 7.5 mmIdeal also for wall connections and finishing on balcony doorsGenerous expansion joints (7 mm)Assembly:The assembly of the design profile is particularly quick and easy. The base profile made of rigid PVC is glued or screwed to the substrate. The cover profile is then pressed into the base profile. The toothed profile bars of the top profile engage securely in the trapezoidal receptacles of the base profile. If necessary, the top profile can be loosened and then anchored back into the base profile.

Product number: 04001324-99

Content: 0.9 M (€15.00* / 1 M)

€13.50*

STCK

Wall Connection profile no. 298 - 13.1 x 13.1 mm black 2.50m

Wall connection no. 298 Black - problem solution between wall and floor.The wall connection profile in black, is universally applicable due to its modern and slim design.By bonding to the wall, the profile is suitable for all thicknesses of floating floor coverings. Installation in areas that are difficult to access, such as behind radiators, is also uncomplicated.Data at a glanceWall connection profile made of aluminiumSelf-adhesiveWidth x height: 13.1 x 13.1 mmFor finishing on balcony and patio doors, floor-to-ceiling windows and in the wall and plinth area.Covers expansion joints up to 13.1 mm.Floor construction: Suitable for all covering thicknesses from 2 mm.Assembly: The wall connection profile has an adhesive surface on the back. This guarantees quick and simple mounting on the wall.

Product number: 04043298-99

Content: 2.5 M (€7.98* / 1 M)

€19.95*

STCK

Transition profile 24 mm self-adhesive Black powder-coated - 1.00 m

Transition profile 24 mm self-adhesive black powder-coated 1.00 m - The perfect connectionWith the transition profile 24 mm in black powder-coated, you can create clean transitions between almost any floor coverings of the same height.modern, discreet appearancequick and safe installationperfectly usable everywhereAluminium profile self-adhesiveDimension (W x L): 24 x 1,000 mmApplication:The universal aluminium profile is simply perfect for use everywhere for floor coverings of the same height.Suitable for resilient floor coverings, textile floor coverings, laminate / multilayer, carpet, etc...Assembly: Quick and easy installation, due to self-adhesive property.

Product number: 04042114-99

€7.90*

STCK

Transition profile Profi-Tec Master Black anodised - 0.90 m

Prinz transition profile 90 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, easy disassembly and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIncludes base profile, grey. The aluminium clip profile system is designed for covering thicknesses of 7 to 15 mm. With the raise profile "Beige" even covering thicknesses up to 17.5 mm can be achieved. Concealed fastened, these profiles offer a perfect look without screw holes.Technical data at a glance:Transition profile - black anodised L= 90 cmMaterial: aluminiumFor floor covering thicknesses 7 - 15 mm (up to 17.5 mm with raising profile)Height compensation up to 6 mm Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile fits tightly on both sides.At the same time, the curved toothing allows problem-free dismantling.The top profile can be detached if necessary and then anchored back into the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.

Product number: 04001303-99

Content: 0.9 M (€19.89* / 1 M)

€17.90* €24.90* (28.11% saved)

STCK

Transition profile 24 mm self-adhesive Black powder-coated - 2.70 m

Transition profile 24 mm self-adhesive Black powder-coated 2.70 m - The perfect connection.With the transition profile 24 mm in black powder-coated, you can create clean transitions between almost any floor coverings of the same height.modern, discreet appearancequick and safe installationperfectly usable everywhereAluminium profile self-adhesiveDimension (W x L): 24 x 2,700 mmApplication:The universal aluminium profile is simply perfect for use everywhere for floor coverings of the same height.Suitable for resilient floor coverings, textile floor coverings, laminate / multilayer, carpet, etc...Assembly: Quick and easy installation, due to self-adhesive property.

Product number: 04043114-99

Content: 2.7 M (€7.37* / 1 M)

€19.90*

STCK

Angle profile 24.5 x 20 mm self-adhesive black powder-coated - 1.00 m

Angle profile 100 cm - For steps, thresholds, edges and landings.The angle profiles are perfect for universal use. Made of aluminium, in very durable professional quality, these are ideally suited as stair angles, as door sill profiles or also as a finish on landings.Technical dataAngle profile - black powder-coatedMaterial: aluminiumDimension 24.5 x 20 x 1000 mmSuitable for design flooring / LVT, resilient or textile floor coverings, laminate / multilayer .Mounting: Self-adhesive

Product number: 04042162-99

€7.99*

STCK

Stair nosing profile for 2,5mm coverings Silver-coated - 2.50 m

Stair nosing profile 45 x 10 mm - Silver.Stair nosing profile for design coverings up to 2,5 mm, for the full-surface installation of design coverings on stair treads. The matching profiles protect the edges of the covering..Technical dataAluminium profile, black powder-coated.Dimension 45 x 10 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 2,5 mmrecessed screw holes

Product number: 04033178-91

Content: 2.5 M (€7.16* / 1 M)

€17.90*

STCK

Transition profile for design floors black anodised - 0.90 m

PROFI DESIGN transition 90 cm - The perfect profile for design floorings.The Design profile system was specially developed for floating Design floor coverings / LVT.Deck profile in a particularly flat, discreet look.automatic adjustment in height and inclinationquick, simple and secure installationincl. base profileThe aluminium clip profile system is designed for covering thicknesses from 4 to 7.5 mm. The practical clip system makes this transition profile quick and easy to install. In addition, it offers a perfect, modern look without screw holes, with sufficient space for expansion joints.Technical data at a glanceTransition profile Design - L = 90 cmTop profile: Aluminium - black anodisedBase profile: Hard PVCFor installation heights of 4 - 7.5 mmHeight compensation up to 3 mmGenerous expansion joints (7 mm)Assembly:The assembly of the design profile is particularly quick and easy. The base profile made of rigid PVC is glued or screwed to the substrate. The cover profile is then pressed into the base profile. The toothed profile bars of the top profile engage securely in the trapezoidal receptacles of the base profile. If necessary, the top profile can be loosened and then anchored back into the base profile.

Product number: 04001322-99

Content: 0.9 M (€15.00* / 1 M)

€13.50*

STCK

Stair nosing profile for 3mm coverings Black powder-coated - 2.50 m

Stair nosing profile 40 x 26 mm - Black powder coated.Stair nosing profile for design coverings up to 3 mm, for the full-surface installation of design coverings on stair treads. The matching profiles protect the edges of the covering..Technical dataAluminium profile, black powder-coated.Dimension 40 x 26 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 3 mmrecessed screw holes

Product number: 04033187-99

Content: 2.5 M (€10.78* / 1 M)

€26.95*

STCK

Stair nosing profile for 2,5mm coverings Black powder-coated - 2.50 m

Stair nosing profile 45 x 10 mm - Black powder coated.Stair nosing profile for design coverings up to 2,5 mm, for the full-surface installation of design coverings on stair treads. The matching profiles protect the edges of the covering..Technical dataAluminium profile, black powder-coated.Dimension 45 x 10 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 2,5 mmrecessed screw holes

Product number: 04033178-99

Content: 2.5 M (€8.76* / 1 M)

€21.90*

STCK

Stair nosing profile no. 271 for 2-3 mm decking stainless steel matt - 3.00 m

Stair nosing profile no. 271 - matt stainless steelStair nosing profile for design floor coverings of 2-3 mm, with insert for a clean and attractive trim of any edges such as stairs, landings or protrusions.Strips with a width of 38.5-40 mm are cut from the design flooring and subsequently inserted into the slide-in section of the profile.Technical dataAluminum profile, matt stainless steelDimensions 13.7 x 44.6 x 3,000 mmInsertion for 28.5-40 mm wide stripsfor design floor coverings / LVT, elastic floor coverings from 2-3 mmrecessed screw holes

Product number: 04014271-92

Content: 3 M (€12.17* / 1 M)

€36.50*

STCK

Adjustment profile for design floors Black anodised - 0.90 m

PROFI DESIGN matching profile 90 cm - The perfect profile for design floorings.The Design profile system was specially developed for floating Design floor coverings / LVT.Deck profile in a particularly flat, discreet look.automatic adjustment in height and inclinationquick, simple and secure installationincl. base profileThe aluminium clip profile system is designed for covering thicknesses from 4 to 7.5 mm. The practical clip system makes this transition profile quick and easy to install. In addition, it offers a perfect, modern look without screw holes, with sufficient space for expansion joints.Technical data at a glanceAdjustment profile Design - L = 90 cmUpper profile: Aluminium - black anodisedBase profile: Hard PVCFor installation heights of 4 - 7.5 mmHeight compensation from 7.5 mm down to 0 mmGenerous expansion joints (7 mm)Assembly:The assembly of the design profile is particularly quick and easy. The base profile made of rigid PVC is glued or screwed to the substrate. The cover profile is then pressed into the base profile. The toothed profile bars of the top profile engage securely in the trapezoidal receptacles of the base profile. If necessary, the top profile can be loosened and then anchored back into the base profile.

Product number: 04001323-99

Content: 0.9 M (€16.56* / 1 M)

€14.90*

STCK

Angle profile 24.5 x 10 mm self-adhesive Black powder-coated - 1.00 m

Angle profile 100 cm - For steps, thresholds, edges and landings.The angle profiles are perfect for universal use. Made of aluminium, in very durable professional quality, these are ideally suited as stair angles, as door sill profiles or also as a finish on landings.Technical dataAngle profile - black powder-coatedMaterial: aluminiumDimension 24.5 x 10 x 1000 mmSuitable for design flooring / LVT, resilient or textile floor coverings, laminate / multilayer .Mounting: Self-adhesive

Product number: 04042160-99

€6.99*

STCK

Stair nosing profile for 3mm coverings Black powder-coated - 5.00 m

Stair nosing profile 40 x 26 mm - Black powder coated.Stair nosing profile for design coverings up to 3 mm, for the full-surface installation of design coverings on stair treads. The matching profiles protect the edges of the covering..Technical dataAluminium profile, black powder-coated.Dimension 40 x 26 x 5.000 mmfor design coverings / LVT, resilient floor coverings up to 3 mmrecessed screw holes

Product number: 04043187-99

Content: 5 M (€9.79* / 1 M)

€48.95*

STCK

Adjustment profile 38 mm self-adhesive black powder-coated - 1.00 m

Adjustment profile 38 mm self-adhesive Black powder-coated 1.00 m - self-adhesive and universally applicable.With the matching profile 38 mm self-adhesive in black powder-coated, you can create clean transitions even with a height difference of up to 11mm. modern, discreet appearancequick and secure installationfor height differences up to 11mmuniversally applicableDimension (W x L): 38 x 1,000 mmApplication:The adjustment profile on aluminium can be perfectly used for height differences of up to 11mm simply almost everywhere. It is suitable for resilient floor coverings, textile floor coverings, laminate / multilayer, etc. ...Assembly: Quick and easy installation, due to self-adhesive property

Product number: 04042138-99

€10.90*

STCK

Transition profile 40 mm self-adhesive black powder-coated - 2,70

Transition profile 40 mm self-adhesive Black powder-coated 2.70 m - The perfect connection.With the transition profile 40 mm in black powder-coated, you can create clean transitions between almost any floor coverings of the same height.modern, discreet appearancequick and secure installationperfectly usable everywhereAluminium profile self-adhesiveDimension (W x L): 40 x 2,700 mmApplication:The universal aluminium profile is simply perfect for use everywhere for floor coverings of the same height.Suitable for resilient floor coverings, textile floor coverings, laminate / multilayer, carpet, etc...Assembly: Quick and easy installation, due to self-adhesive property.

Product number: 04043115-99

Content: 2.7 M (€9.44* / 1 M)

€25.50*

STCK

End profile Profi-Tec Master Black anodised - 2.70 m

Prinz end profile 270 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, problem-free removal and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIdeal for wall connections and the finish on balcony doors.The aluminium clip profile system is designed for covering thicknesses of 8 to 14 mm. With the raised profile "Beige" even covering thicknesses up to 17.5 mm can be achieved. Concealed fastened, these profiles offer a perfect look without screw holes.Technical data at a glanceFinish profile - black anodised L = 270 cmMaterial: aluminiumFor floor covering thicknesses 8 - 14 mm (up to 17.5 mm with raising profile)Includes base profile, grey.Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile lies tightly on both sides.At the same time, the curved toothing allows problem-free disassembly. If necessary, the top profile can be detached and then re-anchored to the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.

Product number: 04003313-99

Content: 2.7 M (€19.22* / 1 M)

€51.90*

STCK

Angle profile 24.5 x 20 mm self-adhesive Black powder-coated - 3.00 m

Angle profile 300 cm - For steps, thresholds, edges and landings.The angle profiles are perfect for universal use. Made of aluminium, in very durable professional quality, these are ideally suited as stair angles, as door sill profiles or also as a finishing touch on landings.Technical dataAngle profile - black powder-coatedMaterial: aluminiumDimension 24.5 x 20 x 3000 mmSuitable for design flooring / LVT, resilient or textile floor coverings, laminate / multilayer .Mounting: Self-adhesive

Product number: 04044162-99

Content: 3 M (€7.33* / 1 M)

€21.99*

STCK

Transition profile Profi-Tec Master Black anodised - 2.70 m

Prinz transition profile 270 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, problem-free disassembly and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIncludes base profile, grey. The aluminium clip profile system is designed for covering thicknesses of 7 to 15 mm. With the raise profile "Beige" even covering thicknesses up to 17.5 mm can be achieved. Concealed fastened, these profiles offer a perfect look without screw holes.Technical data at a glance:Transition profile - black anodised L= 270 cmMaterial: aluminiumFor floor covering thicknesses 7 - 15 mm (up to 17.5 mm with raising profile)Height compensation up to 6 mm .Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile fits tightly on both sides.At the same time, the curved toothing allows problem-free dismantling.The top profile can be detached if necessary and then anchored back into the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.

Product number: 04003303-99

Content: 2.7 M (€20.93* / 1 M)

€56.50*

STCK

Transition profile 30 mm self-adhesive Black powder-coated - 3.00 m

Transition profile 30 mm self-adhesive Black powder-coated 3.00 m - The perfect connection.With the transition profile 30 mm in black powder-coated, you can create clean transitions between almost any floor covering of the same height.modern, discreet appearancequick and safe installationperfectly usable everywhereAluminium profile self-adhesiveDimension (W x L): 30 x 3,000 mmApplication:The universal aluminium profile is simply perfect for use everywhere for floor coverings of the same height.Suitable for resilient floor coverings, textile floor coverings, laminate / multilayer, carpet, etc...Assembly: Quick and easy installation, due to self-adhesive property.

Product number: 04044130-99

Content: 3 M (€6.33* / 1 M)

€18.99*

STCK

Transition profile 40 mm self-adhesive Black powder-coated - 1.00 m

Transition profile 40 mm self-adhesive Black powder-coated 1.00 m - The perfect connection.With the transition profile 40 mm in black powder-coated, you can create clean transitions between almost any floor coverings of the same height.modern, discreet appearancequick and safe installationperfectly usable everywhereAluminium profile self-adhesiveDimension (W x L): 40 x 1,000 mmApplication:The universal aluminium profile is simply perfect for use everywhere for floor coverings of the same height.Suitable for resilient floor coverings, textile floor coverings, laminate / multilayer, carpet, etc...Assembly: Quick and easy installation, due to self-adhesive property.

Product number: 04042115-99

€9.90*

STCK

Adjustment profile 38 mm self-adhesive Black powder-coated - 3.00 m

Adjustment profile 38 mm self-adhesive Black powder-coated 3.00 m - self-adhesive and universally applicable.With the matching profile 38 mm self-adhesive in black powder-coated, you can create clean transitions even with a height difference of up to 11mm. modern, discreet appearancequick and secure installationfor height differences up to 11mmuniversally applicableDimension (W x L): 38 x 3,000 mmApplication:The adjustment profile on aluminium can be perfectly used for height differences of up to 11mm simply almost everywhere. It is suitable for resilient floor coverings, textile floor coverings, laminate / multilayer, etc. ...Assembly: Quick and easy installation, due to self-adhesive property

Product number: 04044138-99

Content: 3 M (€9.97* / 1 M)

€29.90*

STCK

Transition profile for design floors Black anodised - 2.70 m

PROFI DESIGN transition 270 cm - The perfect profile for design floorings.The Design profile system was specially developed for floating Design floor coverings / LVT.Deck profile in a particularly flat, discreet look.automatic adjustment in height and inclinationquick, simple and secure installationincl. base profileThe aluminium clip profile system is designed for covering thicknesses from 4 to 7.5 mm. The practical clip system makes this transition profile quick and easy to install. In addition, it offers a perfect, modern look without screw holes, with sufficient space for expansion joints.Technical data at a glanceTransition profile Design - L = 270 cmUpper profile: Aluminium - black anodisedBase profile: Hard PVCFor installation heights of 4 - 7.5 mmHeight compensation up to 3 mmGenerous expansion joints (7 mm)Assembly:The assembly of the design profile is particularly quick and easy. The base profile made of rigid PVC is glued or screwed to the substrate. The cover profile is then pressed into the base profile. The toothed profile bars of the top profile engage securely in the trapezoidal receptacles of the base profile. If necessary, the top profile can be loosened and then anchored back into the base profile.

Product number: 04003322-99

Content: 2.7 M (€13.67* / 1 M)

€36.90*

STCK

Adjustment profile for design floors Black anodised - 2.70 m

PROFI DESIGN adjustment profile 270 cm - The perfect profile for design floorings.The Design profile system was specially developed for floating Design floor coverings / LVT.Deck profile in a particularly flat, discreet look.automatic adjustment in height and inclinationquick, simple and secure installationincl. base profileThe aluminium clip profile system is designed for covering thicknesses from 4 to 7.5 mm. The practical clip system makes this transition profile quick and easy to install. In addition, it offers a perfect, modern look without screw holes, with sufficient space for expansion joints.Technical data at a glanceAdaptation profile design - L = 270 cmUpper profile: Aluminium - black anodisedBase profile: Hard PVCFor installation heights of 4 - 7.5 mmHeight compensation from 7.5 mm down to 0 mmGenerous expansion joints (7 mm)Assembly:The assembly of the design profile is particularly quick and easy. The base profile made of rigid PVC is glued or screwed to the substrate. The cover profile is then pressed into the base profile. The toothed profile bars of the top profile engage securely in the trapezoidal receptacles of the base profile. If necessary, the top profile can be loosened and then anchored back into the base profile.

Product number: 04003323-99

Content: 2.7 M (€14.78* / 1 M)

€39.90*

STCK

Transition profile 30 mm self-adhesive Black powder-coated - 1.00 m

Transition profile 30 mm self-adhesive Black powder-coated 1.00 m - The perfect connection.With the transition profile 30 mm in black powder-coated, you create clean transitions between almost any floor coverings of the same height.modern, discreet appearancequick and secure installationperfectly usable everywhereAluminium profile self-adhesiveDimension (W x L): 30 x 1,000 mmApplication:The universal aluminium profile is simply perfect for use everywhere for floor coverings of the same height.Suitable for resilient floor coverings, textile floor coverings, laminate / multilayer, carpet, etc...Assembly: Quick and easy installation, due to self-adhesive property.

Product number: 04042130-99

€7.90*

STCK

Angle profile 24.5 x 10 mm self-adhesive Black powder-coated - 3.00 m

Angle profile 300 cm - For steps, thresholds, edges and landings.The angle profiles are perfect for universal use. Made of aluminium, in very durable professional quality, these are ideally suited as stair angles, as door sill profiles or also as a finishing touch on landings.Technical dataAngle profile - black powder-coatedMaterial: aluminiumDimension 24.5 x 10 x 3000 mmSuitable for design flooring / LVT, resilient or textile floor coverings, laminate / multilayer .Mounting: Self-adhesive

Product number: 04044160-99

Content: 3 M (€6.33* / 1 M)

€18.99*

STCK

End profile Profi-Tec Master black anodised - 0.90 m

Prinz end profile 90 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, problem-free removal and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIdeal for wall connections and the finish on balcony doors.The aluminium clip profile system is designed for covering thicknesses of 8 to 14 mm. With the raised profile "Beige" even covering thicknesses up to 17.5 mm can be achieved. Concealed fastened, these profiles offer a perfect look without screw holes.Technical data at a glanceFinal profile - black anodised L = 90 cmMaterial: aluminiumFor covering thicknesses 8 - 14 mm (up to 17.5 mm with raising profile)Includes base profile, grey.Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile lies tightly on both sides.At the same time, the curved toothing allows problem-free disassembly. If necessary, the top profile can be detached and then re-anchored to the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.

Product number: 04001313-99

Content: 0.9 M (€19.89* / 1 M)

€17.90*

STCK

Aluminum skirting board CULTUS 45 - black powder coated

"Cultus45" aluminum skirting board 60 x 14 mmHigh-quality aluminum skirting board "CULTUS 45" in a modern and elegant look "Black".Bottom cover width: 14mmconcealed cable routingFixed at a 45° angleincl. 6 mounting clips Assembly: The aluminum skirting boards are attached to the wall using a clip system.Note: The clips required for assembly (6 pieces/skirting board) are included in the set.

Product number: 04040500-99

Content: 2.5 M (€15.98* / 1 M)

€39.95* €49.95* (20.02% saved)

STCK

Adjustment profile Profi-Tec Master Black anodised - 2.70 m

Prinz Adjustable Profile 270 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, problem-free disassembly and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIncludes base profile, grey. The aluminium clip profile system is designed for covering thicknesses of 7 to 17.5 mm. Concealed mounted, these profiles offer a perfect appearance without screw holes..Technical data at a glance:Adaptor profile - black anodised L = 270cm.Material: aluminiumfor covering thicknesses 7 - 17.5 mmHeight adjustment from 17.5 mm down to 0 mm .Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile fits tightly on both sides.At the same time, the curved toothing allows problem-free dismantling.The top profile can be detached if necessary and then anchored back into the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.

Product number: 04003307-99

Content: 2.7 M (€23.89* / 1 M)

€64.50*

STCK

End profile for design floors Black anodised - 2.70 m

PROFI DESIGN end profile 270 cm - The perfect profile for design floorings.The Design profile system was specially developed for floating Design floor coverings / LVT.Deck profile in a particularly flat, discreet look.automatic adjustment in height and inclinationquick, simple and secure installationincl. base profileThe aluminium clip profile system is designed for covering thicknesses from 4 to 7.5 mm. The practical clip system makes this transition profile quick and easy to install. In addition, it offers a perfect, modern look without screw holes, with sufficient space for expansion joints.Technical data at a glanceFinish profile Design - L = 270 cmUpper profile: Aluminium - black anodisedBase profile: Hard PVCFor installation heights of 4 - 7.5 mmIdeal also for wall connections and finishing on balcony doorsGenerous expansion joints (7 mm)Assembly:The assembly of the design profile is particularly quick and easy. The base profile made of rigid PVC is glued or screwed to the substrate. The cover profile is then pressed into the base profile. The toothed profile bars of the top profile engage securely in the trapezoidal receptacles of the base profile. If necessary, the top profile can be loosened and then anchored back into the base profile.

Product number: 04003324-99

Content: 2.7 M (€13.67* / 1 M)

€36.90*

STCK

Wall Connection profile no. 298 - 13.1 x 13.1 mm black 1.00 m

Product number: 04042298-99

€8.95*

STCK

Adjustment profile Profi-Tec Master Black anodised - 0.90 m

Prinz Adjustable Profile 90 cm - Powerful - Clever - Stylish.Elegant design, high frictional connection, problem-free disassembly and maximum load-bearing capacity - are the strengths of the clip profile system.elegant, flat design without decorative groovesautomatic adjustment in height and inclinationsimple, quick and safe installationIncludes base profile, grey. The aluminium clip profile system is designed for covering thicknesses of 7 to 17.5 mm. Concealed mounted, these profiles offer a perfect appearance without screw holes..Technical data at a glance:Adaptor profile - black anodised L = 90cm.Material: aluminiumfor covering thicknesses 7 - 17.5 mmHeight compensation from 17.5 mm down to 0 mm .Assembly:Assembly is particularly quick and easy.With the curved-toothed joint bar, the top profile snaps into the base profile and automatically adjusts to the floor covering - variable in height and inclination.Even with large differences in level, the profile fits tightly on both sides.At the same time, the curved toothing allows problem-free dismantling.The top profile can be detached if necessary and then anchored back into the base profile. Profi-Tec profiles are extremely stable and torsion-resistant. They have been tested by the German TÜV for a point load capacity of 1.5 tonnes.

Product number: 04001307-99

Content: 0.9 M (€23.22* / 1 M)

€20.90*

STCK

Transition profile 38 mm self-adhesive Black powder-coated - 1.00 m

Transition profile 38 mm self-adhesive Black powder-coated 1.00 m - The perfect connection.With the transition profile 38 mm in black powder-coated, you create clean transitions between almost any floor coverings of the same height.modern, discreet appearancequick and safe installationperfectly usable everywhereAluminium profile self-adhesiveDimension (W x L): 38 x 1,000 mmApplication:The universal aluminium profile is simply perfect for use everywhere for floor coverings of the same height.Suitable for resilient floor coverings, textile floor coverings, laminate / multilayer, carpet, etc...Assembly: Quick and easy installation, due to self-adhesive property.

Product number: 04042132-99

€9.50*

STCK

Stair nosing profile no. 276 for 7-10 mm decking stainless steel matt - 3.00 m

Stair nosing profile no. 276 - matt stainless steelStair nosing profile for laminate or parquet flooring from 7 - 10 mm, with insertion for a clean and attractive trim for any edges such as stairs, landings or protrusions.Strips with a width of 41-43 mm are cut from the floor and subsequently inserted into the profile slot.Technical dataAluminum profile, matt stainless steelDimensions 21.6 x 51.5 x 3,000 mmInsertion for 41-43 mm wide stripsfor laminate or parquet from 7-10 mmrecessed screw holes

Product number: 04014276-92

Content: 3 M (€14.27* / 1 M)

€42.80*

STCK

Metal skirting 60 x 10mm - black powder coated

Aluminum skirting board for an elegant and attractive-looking transition between wall and floor. The cable channel built in the clip enables the invisible laying of cables behind the bar.Montage: These skirting board shall attached with a clip system on the wall.Note:The skirting boards are 2,000 mm lengths. (One unit therefore corresponds to 2x 2,000 mm skirting)

Product number: 04040359-99

Content: 4 M (€14.99* / 1 M)

€59.95*

STCK

Angle skirting 19 x 60 x 4.000 mm - Black powder-coated

skirting board made on aluminum for an elegant and attractive-looking transition between wall and floor. Especially suitable for vinyl floor.Montage: These skirting board can be attached by double-sided tape on the wall.Note:The skirting boards are 2,000 mm lengths. (One unit therefore corresponds to 2x 2,000 mm skirting)

Product number: 04045390-99

Content: 4 M (€12.49* / 1 M)

€49.95*

STCK

Metal skirting for cable installation - black powder coated

Aluminum skirting board for an elegant and attractive-looking transition between wall and floor. The cable channel built in the clip enables the invisible laying of cables behind the bar.Montage: These skirting board shall attached with a clip system on the wall.Tip: The clips, necessary for the assembly, must be ordered separately.

Product number: 04040100-99

Content: 2.5 M (€15.98* / 1 M)

€39.95*

STCK

Metal clip skirting - Aluminum black powder coated

Aluminum skirting board for an elegant and attractive-looking transition between wall and floor. The cable channel built in the clip enables the invisible laying of cables behind the bar.Montage: These skirting board shall attached with a clip system on the wall.Tip: The clips, necessary for the assembly, must be ordered separately.

Product number: 04040200-99

Content: 2.5 M (€15.58* / 1 M)

€38.95*

STCK

Stair nosing profile no. 271 for 2-3mm coverings Black powder-coated - 3.00 m

Stair nosing profile no. 271 - black powder-coatedStair nosing profile for design flooring of 2-3mm, with insertion for a clean and beautiful visual trim of any edges such as of stairs, landings or ledges.Strips with a width of 38.5-40 mm are cut from the design floor and subsequently inserted into the insertion of the profile..Technical dataAluminium profile, black powder-coatedDimension 13.7 x 44.6 x 3,000 mmInsertion for 28.5-40mm wide stripsfor design coverings / LVT, resilient floor coverings from 2-3 mmrecessed screw holes

Product number: 04014271-99

Content: 3 M (€13.30* / 1 M)

€39.90*

STCK

Stair nosing profile no. 276 for 7-10mm coverings Black powder-coated - 3.00 m

Stair nosing profile no. 276 - black powder-coatedStair nosing profile for laminate or parquet flooring from 7 - 10 mm, with insertion for a clean and beautiful screen of any edges such as of stairs, landings or ledges..From the floor, strips with a width of 41-43 mm are cut and subsequently inserted into the insertion of the profile.Technical dataAluminium profile, black powder-coated.Dimension 21.6 x 51.5 x 3,000 mmInsertion for 41-43 mm wide stripsfor laminate or parquet flooring from 7-10 mmrecessed screw holes

Product number: 04014276-99

Content: 3 M (€15.63* / 1 M)

€46.90*

STCK

Stair nosing profile for 2,5mm coverings high-grade steel matt - 2.50 m

Stair nosing profile 45 x 10 mm - high-grade steel matt.Stair nosing profile for design coverings up to 2,5 mm, for the full-surface installation of design coverings on stair treads. The matching profiles protect the edges of the covering..Technical dataAluminium profile, high-grade steel matt.Dimension 45 x 10 x 2,500 mmfor design coverings / LVT, resilient floor coverings up to 2,5 mmrecessed screw holes

Product number: 04033178-92

Content: 2.5 M (€8.36* / 1 M)

€20.90*

STCK

Stair nosing profile no. 271 for 2-3 mm coverings silver - 3.00 m

Stair nosing profile no. 271 - silverStair nosing profile for design floor coverings of 2-3 mm, with insert for a clean and attractive trim of any edges such as stairs, landings or protrusions.Strips with a width of 38.5-40 mm are cut from the design flooring and subsequently inserted into the profile slot.Technical dataAluminum profile, silverDimensions 13.7 x 44.6 x 3,000 mmInsertion for 28.5-40 mm wide stripsfor design floor coverings / LVT, elastic floor coverings from 2-3 mmrecessed screw holes

Product number: 04014271-91

Content: 3 M (€11.30* / 1 M)

€33.90*

STCK

Stair nosing profile no. 276 for 7-10 mm coverings silver - 3.00 m

Stair nosing profile no. 276 - silverStair nosing profile for laminate or parquet flooring from 7 - 10 mm, with insertion for a clean and attractive trim for any edges such as stairs, landings or protrusions.Strips with a width of 41-43 mm are cut from the floor and subsequently inserted into the profile slot.Technical dataAluminum profile, silverDimensions 21.6 x 51.5 x 3,000 mmInsertion for 41-43 mm wide stripsfor laminate or parquet from 7-10 mmrecessed screw holes

Product number: 04014276-91

Content: 3 M (€12.63* / 1 M)

€37.90*

STCK

Black Edition Profiles - Stylish transitions in black

Our Black Edition Profiles offer you the perfect solution for elegant and discreet transitions in a modern black. These high-quality profiles in a black finish give your floors, walls and transitions an exclusive touch and are ideal for minimalist and industrial interior design styles.

From transition profiles to end profiles and adjustment profiles - the Black Edition profiles not only ensure a harmonious overall appearance, but also maximum functionality and robustness. Thanks to their matt or glossy surface, they set stylish accents and give every room a high-quality look.

Whether for laminate, parquet or vinyl - the Black Edition profiles are versatile and offer a durable and resilient solution. Make your home unique and stand out with the modern elegance of the Black Edition profiles in black.